Search

• Accordingly, a flexible traction power supply system (FTPSS) composed of a TT and multi-port power hub and its coordinated control strategy are proposed for VU compensation and energy conservation in this paper. The main contributions can be summarized as follows: • Different from previous research, a power hub is installed in the TPSS to achieve power flow control among the utility grid, traction network, and DC grid. The FTPPS with the power hub can enable VU compensation for the utility grid, which also offers a friendly interface with distributed PV and ESS for on-site access. • A three-port VU compensation method based on active power flow control and reactive power injection is presented, which divides the system demand compensation capacity and reduces the performance requirements for power electronics, compared with traditional compensation methods. • A coordinated control strategy with a hierarchical structure is designed for FTPSS. The control strategy enables real-time power management to enhance energy utilization and mitigate VU in the system layer and coordinates multiple converters to realize the multi-function operation of the system in the converter layer. To mitigate voltage unbalance (VU) and eliminate the neutral sections while reducing the energy consumption of railways, a flexible traction power supply system (FTPSS) with the power hub is proposed. Different from conventional schemes, the proposed system provides a friendly interface to realize the on-site access of distributed photovoltaic (PV) generation along the railway line and concentrated integration of energy storage systems. The power flow is centrally managed by the power hub to reduce energy consumption and the proposed three-port VU compensation method is coupled with the power hub to suppress negative sequence current caused by trains. Considering the volatility of PV generation and traction loads, four operation modes including grid-connected, valley filling, VU compensation, and peak clipping mode, are proposed to dynamically regulate the operation of FTPSS. Moreover, a coordinated control strategy with a hierarchical structure is developed to enable the operation modes. The strategy is implemented with a global controller and multiple local controllers, which can realize real-time power management and flexible transition among different modes. Finally, different simulation and experimental case studies based on the field data are carried out to comprehensively verify the feasibility and effectiveness of the proposed FTPSS and control strategy. [ABSTRACT FROM AUTHOR]

Facing the challage of energy conservation and emission reduction in the building sector, most energy saving strategies of central heating only focus on the performance improvement of building envelope, ignoring the impact of energy use behavior. This paper proposed a building energy conservation strategy based on energy use behavior analysis, which provides a perspective for in-depth exploration of building energy conservation. After investigating a typical university in the northern China, the energy use behaviors were characterized and two different DeST energy consumption models before or after considering energy use behavior were established. By comparing the results calculated by these two models, the impact of energy use behavior analysis on building energy consumption was quantitatively analyzed. The results show that the heating energy consumption and carbon emission can be reduced by 23.28% and 23% respectively through the proposed strategy based on energy use behavior. Therefore, the analysis of energy use behavior can provide a theoretical basis for heating operators to make decisions on energy supply regulation. With central cooling and heating further popularizing in the future, the research methodology of this paper has more extensive reference value for energy conservation and emission reduction strategies in the building sector. [ABSTRACT FROM AUTHOR]

Highlights • Parameters of 60 electricity-saving measures and 16 abatement measures are compiled. • Synergies of electricity use in China's chemical sector at grid level are assessed. • Efficient use of power can cut 154 Mt CO 2eq , 295 kt SO 2 , 322 kt NO x and 64 kt PM 2.5. • North and Northwest grids have the largest economic benefits on emissions reduction. • Grid with high electricity price is more sensitive to price change than other grids. Abstract Industry is a large electricity user. China's chemical industry (globally the largest based on sales) contributes 7% to China's GDP, while it consumes 11% of the total electricity consumption in industry and is responsible for 40% of total CO 2eq , 40% of SO 2 , 59% of NO x and 18% of PM-emissions of the chemical industry emissions. The heterogeneity of GHG and air pollutant emissions across electricity grids (within a country) is rarely included in analyses. In this paper, electricity conservation supply curves are developed (distinguishing the grids) to estimate the cost-effective and technical potentials of electricity conservation in China's chemical industry. The emission factors per grid for GHG (i.e. CO 2 , CH 4 and N 2 O) and air pollutants (i.e. SO 2 , NO x and PM 2.5) are calculated and used to quantify the emissions mitigation achieved by electricity saving technologies in the chemical industry for the period 2012–2035. Results show that significant multiple benefits can be obtained by implementing electricity efficiency measures. There are large differences among the six grids in terms electricity savings and emissions abatement of GHG and air pollutants. 83% of the total electricity saving potential is contributed by the North, Northwest and Central grids, equal to 32% of baseline electricity consumption in 2035. In 2035, 129 Mt of CO 2 , 33 kt CO 2eq of CH 4 , 571 kt CO 2eq of N 2 O, 235 kt of SO 2 , 275 kt of NO x and 52 kt of PM 2.5 in these three grids can be avoided as a result of electricity savings (a reduction of 31–33% compared to baseline emissions). When decision-makers set targets for energy saving and emission reduction, the multiple benefits and grid heterogeneity should not be ignored. [ABSTRACT FROM AUTHOR]

Fuel poverty is a recognized and increasing problem in several European countries. A growing body of literature covers this topic, but dedicated analysis for Portugal are scarce despite the high perception of this condition. This paper contributes to fill this knowledge gap focusing on a European southern city while bringing new datasets and analysis to the assessment of this topic; consumer groups identification and to policy discussion. Daily electricity smart meters' registries were combined with socio-economic data, collected from door-to-door surveys, to understand the extent and the determinants of energy consumption for two contrasting consumer groups (herein called fuel poverty and fuel obesity groups). The analysis is based on the amount and annual profile of electricity consumption and was complemented with building energy simulations for relevant building typologies in those groups, to identify heating and cooling thermal performance gaps. The existence of these gaps allowed confirming and/or discarding the initial hypothesis of the poverty or obesity conditions. Results disclose socio-economic variables, as income, and consumers' behavior as key determinants of electricity consumption. It was identified a severe lack of thermal comfort levels inside households of both groups, either in cooling (98% for fuel poverty and 87% for fuel obesity) and heating seasons (98% for fuel poverty and 94% for fuel obesity). Major conclusion refers that electricity consumption cannot be used alone to segment consumer groups. This assessment may serve to support energy policy measures and instruments targeted to different consumers' groups. For example, distinct campaigns and differentiated incentives may apply to achieve energy efficiency and reduction while keep or improve indoor comfort levels. [ABSTRACT FROM AUTHOR]

Abstract: A key factor deciding the capacity to increase the sustainability of final products is the energy efficiency. The energy embodied in a product is an aggregation of all of the energy embodied in the products' components and subsystems, expended through its manufacturing processes and logistical activities. Currently, accurate estimation of this energy metric is hindered due to the unavailability of energy use data traceable to individual processes and equipment associated with the product's assembly. In this paper, we propose using minimally-required energy to compute energy efficiency of a product assembly process. Based on the proposed approach, efficiency metrics established on the process, product, material and equipment characteristics have been presented at the assembly activity and equipment level. A case study has been presented for a hybrid laser welding process to demonstrate the computational methods used to arrive at these efficiency metrics. Major contributions of this paper are the metrics development and exemplifying the metrics through an actual assembly process (hybrid laser welding) case study. We will explain how these metrics can provide industries with a capability to identify opportunities to improve their sustainability performance across their assembly processes. [Copyright &y& Elsevier]

Abstract: This paper deals with the method of how to regenerate the potential energy for a hybrid hydraulic excavator (HHE). After studying the structure and working cycle of the HHE, two energy regeneration systems are considered. Then, the control strategy and parameter matching for the proposed energy regeneration system (ERS) are discussed. United simulations with AMEsim and MATLAB/simulink for the conventional control system and two ERSs are carried out in this paper. An estimated 41% of the total potential energy could be regenerated at the lowering of the boom in accumulator-motor-generator system while the recovery efficiency in the motor-generator system is only about 17%, and it is also shown that the accumulator-motor-generator energy regeneration system (AMGERS) features better speed control of the boom and response characteristics than the motor-generator energy regeneration system (MGERS), hence, the AMGERS is a good configuration for the HHE at present. [Copyright &y& Elsevier]

[Display omitted] • The influencing factors on energy efficiency of data center are reviewed. • Energy efficiency metrics are classified according to different priorities. • Appropriate metrics should be selected according to data center function for optimization. • Metrics are analyzed by hierarchy according to the degree of sustainable development. • Challenges and gaps are highlighted and suggestions are given for future works. The rapid development of the Internet requires data center infrastructures to be extended to a large scale with a higher power capacity and a reduction in energy consumption and carbon emissions. It is of great significance for this application to reduce energy consumption, capital cost and carbon emissions while ensuring a safe and reliable data center operation. Evaluation metrics have been considered an effective method to assess the energy efficiency of data centers and have been widely used in various data centers for many years. This work reviews the latest progress of data center evaluation metrics development in recent 20 years. Energy efficiency metrics are summarized based on energy conservation, eco-design and data center security, with the advantages and disadvantages and their correlations discussed. The applicability of each metric is analyzed. The influencing factors of energy efficiency of data centers discussed include site selection, IT equipment, power supply and distribution systems, cooling systems, building structure, and temperature control. The results show that the current evaluation metrics are valuable for the assessment of energy saving of data centers. However, more comprehensive and multi-scale evaluation metrics combining energy consumption, eco-design and data center security are needed to accelerate the progress towards carbon neutrality. In this paper, the hierarchy analysis of metrics is carried out according to sustainability, and metrics in line with sustainable development should be used preferentially. [ABSTRACT FROM AUTHOR]

Abstract: Economic growth in China needs lots of energy to support, but how to obtain a sufficient energy supply is now a problem. Meanwhile, environmental pollution caused by energy consumption is a problem that urgently needs to be solved. In order to adapt China’s fast developing economy, and on the basis of current policies, paying more attention to energy saving and environmental protection is more important. Therefore, to reasonably analyze China’s regional environmental efficiency and its determinants has practical significance. This article uses the Super-SBM model under undesirable outputs to measure regional environmental efficiency in China, and then explores influential factors of China’s environmental efficiency between 1991–2001 by means of the Tobit regression model. The empirical results show that during the sample period, the overall average level of China’s environmental efficiency is low, and the gap between different provinces and areas is large. The eastern area’s efficiency is obviously superior to the central and western area, which shows the necessity at present to optimize regional integration and promote innovation of energy conservation and emission reduction technology. At the same time, the “Eleven-Five ” year plan clearly states the energy saving and consumption reducing index, which motivates a great increase in China’s overall environmental efficiency, and promotes the fast development of resource conservation and environmentally friendly societal construction. The analysis of the influence factors by the Tobit model shows that fiscal decentralization and technology progress can increase environmental efficiency on the whole while economic scale and regional difference can also influence the efficiency. However, these factors’ influence is not the same in different areas. Finally, based on the research results, this paper gives policy recommendations on reducing pollution emissions and increasing China’s environmental efficiency. [Copyright &y& Elsevier]

Abstract: Numerous studies have focused on improving energy efficiency in commercial buildings. Engineers and researchers have developed complex methods to improve energy efficiency, but buildings are often managed by non-specialised technicians who need understandable and cost-effective actions to implement in their buildings. This paper presents basic actions on which to base improvements in energy efficiency in commercial buildings in operation. Furthermore, obtained results and details of the implementation of these techniques in various buildings in the Universitat Politècnica de València are presented. [Copyright &y& Elsevier]

Abstract: Along with high-speed economic development and increasing energy consumption, the Chinese Government faces a growing pressure to maintain the balance between energy supply and demand. In 2009, China has become both the largest energy consumer and CO2 emitting country in the world. In this case, the inappropriate energy consumption structure should be changed. As an alternative, a suitable infrastructure for the implementation of renewable energy may serve as a long-term sustainable solution. The perspective of a 100% renewable energy system has been analyzed and discussed in some countries previously. In this process, assessment of domestic renewable energy sources is the first step. Then appropriate methodologies are needed to perform energy system analyses involving the integration of more sustainable strategies. Denmark may serve as an example of how sustainable strategies can be implemented. The Danish system has demonstrated the possibility of converting into a 100% renewable energy system. This paper discusses the perspective of renewable energy in China firstly, and then analyses whether it is suitable to adopt similar methodologies applied in other countries as China approaches a renewable energy system. The conclusion is that China’s domestic renewable energy sources are abundant and show the possibility to cover future energy demand; the methodologies used to analyse a 100% renewable energy system are applicable in China. Therefore, proposing an analysis of a 100% renewable energy system in China is not unreasonable. [ABSTRACT FROM AUTHOR]

Abstract: One of the central variables in bottom-up energy efficiency and saving calculations is the energy consumption baseline. In the evaluation of energy efficiency measures, developing this baseline is a challenging task, which may involve serious problems, especially if the energy service of the analysed subject has changed while the energy efficiency measure was being implemented. In this paper we present a formalised concept of the process of developing the baseline that is flexible enough to deal with various difficulties, such as changes in the levels of the energy services involved. We also discuss the most relevant options for deriving the necessary variables. [ABSTRACT FROM AUTHOR]

Abstract: The energy saving opportunity of supermarket refrigeration systems using subcooler between the medium-temperature (MT) refrigeration system and the low-temperature (LT) refrigeration system has been identified in the previous work. This paper presents a model-based comprehensive analysis on the subcooler design. The optimal subcooling control is discussed as well. With optimal subcooler size and subcooling control, the maximum energy savings of integrated two-temperature supermarket refrigeration system using R404A or R134a as working fluid can achieve 27% or 20%, respectively. The load ratio of MT to LT system and the operating conditions have considerable impact on the energy savings. [ABSTRACT FROM AUTHOR]

Abstract: We have been developing technologies for energy saving in the residential sector. Recently, we have been concentrating our resources specifically into the development of polymer electrolyte fuel cell (PEFC) cogeneration systems. The system has excellent energy saving characteristics. However, the total amount of energy saved depends on how the system is operated. The characteristics of residential energy consumption are more complicated than in industrial use and depend on individual living patterns. It is therefore not easy to develop a control method for a system that can be generally applied across a wide variety of residential use. In this paper, we propose a system configuration and operation planning method developed for a residential PEFC cogeneration system. Using an operation planning method we developed, we demonstrate that our system provides higher energy savings than the conventional method. The energy saving rates are 15.9% under a large heat demand, 18.4% under a relatively high electrical demand and low heat demand, 1.3% under relative low electrical and heat demands. [Copyright &y& Elsevier]

Abstract: In the last years, the growing demand for air conditioning has caused a significant increase in demand for primary energy resources. Solar-powered cooling is one of the technologies which allows to obtain, by using the renewable solar source, an important energy saving compared to traditional air conditioning plants. The paper describes different technical installations for solar cooling, their way of operation, advantages and limits. The objective of the present study has been to analyze the technical and economic feasibility of solar absorption cooling systems, designed for two different application fields: industrial refrigeration and air conditioning. The possibility to replace or integrate the existing plants is studied, by considering the refrigeration requirements of a company, which works in meat manufacturing, and the heating and cooling demands of a hotel located in a tourist town in Italy. In the first case, the system comprises an absorption chiller coupled to solar flat plate collectors, whereas the second application is about a hybrid trigeneration plant, known as thermo-solar trigeneration; this option allows having greater operational flexibility at sites with demand for energy in the form of heating as well as cooling, for example in a hotel. In this way the authors could compare different results obtained by a technical and economic experimental analysis based on existing users and evaluate the advantages and disadvantages in order to suggest the best solution for the two studied cases. [Copyright &y& Elsevier]

Abstract: The importance of developing a method to bridge the gap between the current increasing trend of CO2 emission from the commercial sector and the reduced emission level for ensuring long-term sustainability has increased. Various concepts exist for managing the energy use and CO2 emission. These concepts can be categorized into advancement in technologies, dissemination of energy saving measures in buildings, optimization of local energy generation and distribution systems, spatial building stock pattern management, and improvement in CO2 emission factor of the grid electricity. In this paper, we propose a modeling approach for energy use in the commercial sector in order to evaluate the options involved in the abovementioned energy management concepts in an integrated manner. In this modeling approach, a district is dealt with as a basic unit. Districts are first classified into several categories according to the spatial building stock pattern, or urban form. The end-use energy consumption per unit floor area is then calculated for each district category using a simulation of energy use in buildings in a representative district; this is used for quantifying the total end-use energy consumption at the municipal level. We carried out a case study in order to demonstrate the simulation capabilities and features of the suggested modeling approach in contrast with the conventional modeling approaches. In this case study, certain scenarios of CO2 abatement integrating the energy management concepts are applied in the commercial sector of Osaka city, Japan, in order to investigate alternative avenues toward which policy efforts must be directed. [Copyright &y& Elsevier]

Abstract: This paper investigates alternative prospects for an urban energy system from a long-term perspective in order to achieve a reduction in CO2 emission by more than 50% of the current emission in the Japanese commercial sector. This will assist in making strategic choices with regard to the implementation of available technologies in order to create a substantial change. A simulation model based on the bottom-up approach – a fundamental part of the evaluation framework of technology implementation scenarios – provides insights into the changes required in all the components of urban energy systems from the equipment level to the entire building and systems level and finally to the neighborhood and city levels. This model is applied to the Yodoyabashi district, a central business district in Osaka, Japan, in order to predict the end-use energy consumption and CO2 emission under various scenarios. This is based on different concepts of community energy management. The results of this case study suggest that we can achieve a reduction of 60–90% of the current CO2 emission by the middle of the 21st century. [Copyright &y& Elsevier]

Abstract: Estimation of energy performance indexes, like the heating curve or the energy signature, requires robust regression of the heating losses on the outdoor temperature. The solution proposed in this paper is to use the range between the 1st and the 3rd quartile of the quantile–quantile (q–q) plot to check if the heating losses and the outdoor temperature have the same distribution and, if yes, to perform the regression in this range of the q–q plot. The result is a model that conserves its prediction performance for data sets of the outdoor temperature different of those used for parameter identification. The robust model gives the overall heat transfer coefficient and the base temperature, and it may be used to estimate the energy consumption for data sets of the outdoor temperature coming from different time—space locations. [Copyright &y& Elsevier]

Abstract: This paper addresses the issue of energy performance of data centers by closely examining energy use of two data centers in commercial office buildings. The primary objective of the study is to examine an empirical energy use pattern of data centers under tropical climatic conditions, and give guidance for data centers’ design, operation and maintenance and retrofitting to achieve better energy performance. Actual energy use characteristics, design criteria, and energy and cost saving potentials were analyzed and compared between two data centers. Methodology of energy performance evaluation of data centers was discussed. The study concludes that data centers were high energy consuming areas in commercial office buildings—energy consumptions of approximately 3000kWh/(m2 year) and 2000kWh/(m2 year), respectively, were observed in the case studies. Power demands were often grossly over-provided in these facilities. This leaded to substantial increase in capital and running cost, which can be wasteful. Disparity in energy performance between case studies demonstrated the need for design guidelines and practical benchmarking. In one case study, approximately 56% (1.2GWh/year) of energy consumption could be conserved through efficient designs of base infrastructure and energy consuming systems, as compared to better practice. The predicted cost saving is more than US$ 80,000 per year. [Copyright &y& Elsevier]

Abstract: This paper reports an experimental and simulation study of application of radiant cooling using natural air for ventilation under hot and humid climate of Thailand. To avoid condensation of moisture on the cooling panel, the temperature of water supplied to the panel was limited to 24°C. This led to the expectation that the low heat reception capacity of the panel would limit its use only to situations when loads were low. Experiments were conducted in an experimental room over the hot and dry period of March, the humid period of May, and the cool period of December. The results generally confirm the good potential for application of radiant cooling. However, the room was served by radiant panels with a total area of 7.5m2. Its capacity was grossly inadequate during the hot period, even for night time application only. A special configuration was devised to achieve thermal comfort for the area served by the panel. The well-known TRNSYS program was used to simulate the use of cooling panels and conventional air-conditioning in the experimental room. Simulation results match experimental results very well. Using comfort criterion adopted by ASHRAE and International Standards Organization, results from experiments and simulation show that thermal comfort could be obtained with application of radiant cooling. [Copyright &y& Elsevier]