Search

• Aspergillus and G- bacteria are the predominant strains in FN children. • mNGS is far superior to TPD in detecting fungal infections. • mNGS is conducive to targeted therapy and improved prognosis of FN children. To investigate the application value of metagenomic next-generation sequencing (mNGS) in children with hematological diseases presenting with Febrile Neutropenia (FN). We retrospectively analyzed the clinical data of 49 hematological children with FN, and compared the results of mNGS with those of traditional pathogen detection (TPD) and the prognoses of mNGS positive group and negative group. A total of 77 pathogenic strains were identified, of which 70 strains were detected by mNGS, 19 strains by TPD, and Aspergillus and G- bacterias were the predominant strains in FN children who developed bloodstream infections. 42 cases were in the mNGS-positive group, of which 17 were simple infections, 25 were mixed infections, and 7 were in the negative group; the TPD-positive group contained 19 cases, all of which were simple infections. The detection rate of total and mixed pathogens was higher than that of TPD, and the difference was statistically significant (P<0.05). The mNGS positive group was detected earlier than the negative group, and with lower mortality and drug-related adverse events (DRAE), and the difference was statistically significant (P<0.05). For FN children with hematological diseases, early mNGS can effectively improve the efficacy of pathogen detection, and precise treatment after clarifying the pathogens can reduce mortality and avoid antibiotic abuse. [ABSTRACT FROM AUTHOR]

• Risk compensation effect of helmet use is studied based on selected bicyclists. • Targeted maximum likelihood estimator and ensemble learning are applied in this study. • Our results suggest the existence of risk compensation effect due to helmet use. Introduction: Safety is a critical factor in promoting sustainable urban non-motorized travel modes like bicycles. Helmets have shown to be effective in reducing injury severity in bicycle crashes, however, their effects on bicyclists' behaviors still requires deeper understanding, especially amid the emerging trend of using shared bicycles. Risk compensation effects suggest that bicyclists may offset perceived gains in safety from wearing a helmet by increasing risk-taking behaviors. A better understanding of these compensation effects can be useful in assessing various bicycle safety related programs. Method: Using a sample of 131 bicyclists from the San Francisco Bay area, this research studies how bicyclists respond with respect to risk-taking behaviors under various urban-street conditions, as a function of helmet use. Study participants were each shown 12 videos, shot in Berkeley, California, from the perspective of a bicyclist riding behind another bicyclist. A fractional factorial experiment design was used to systematically vary contextual attributes (e.g., speed, bike lane facilities, on-street parking, passing vehicles) across the videos. After each video, participants were asked to indicate if they would overtake the bicyclist in the video. With the help of data adaptive estimation techniques, targeted maximum likelihood estimation (TMLE) was applied to estimate the average risk difference between helmeted users and non-users, controlling for self-selection effects. Individual-based nonparametric bootstrap was performed to assess the uncertainty associated with the estimator. Results: Our findings suggest, on average, individuals more likely to wear a helmet are 15.6% more likely to undertake a risky overtaking maneuver. Practical Applications: This study doesn't try to oppose mandatory helmet laws, but rather serves as a cautionary warning that road safety programs may need to consider strategies in which unintended impact of bicycle helmet use can be mitigated. Moreover, our findings also provide additional evaluation component when it comes to the cost-benefit assessment of helmet-related laws. [ABSTRACT FROM AUTHOR]

• Coordination-based supramolecular self-assembly is an effective approach for construction of the theranostic nanoplatforms. • Coordination-based supramolecular self-assembly is capable of modulating the nanostructures and physicochemical properties. • High performance theranostics are highlighted including multiple, responsive and enhanced theranostic applications. • Small biomolecules are promising candidates for the development of coordination-based supramolecular nanoplatforms. Theranostics possessing great potential in the treatment of various diseases gain attentions in recent years. Coordination-assembled supramolecular nanoplatforms are emerged as promising candidates for theranostic applications. With the facile, robust and versatile fabrication, these systems overcome the drawbacks of many existing theranostic nanoplatforms. Coordination-based supramolecular self-assembly offers the possibility for modulating the physicochemical properties, thus paving the way for theranostic applications. We highlight the most recent advances on the modulation of structures and properties of coordination-assembled supramolecular nanoplatforms and their exploration in theranostic applications. The long-term goal of this field is to achieve high-performance theranostics in clinic. [ABSTRACT FROM AUTHOR]

Abstract Ambient fine particulate matter (PM 2.5) has long been the primary air pollutant with alarming public health risk in China. PM 2.5 pollution control in China still mainly concerned concentration declining. The qualification and identification of PM 2.5 -attributable health loss is crucial for China's air quality improvement and pollution prevention. This study assessed the annual health loss and economic impact attributed to PM 2.5 exposure at a city level in China from 2015 to 2017. The health benefits from achieving specific PM 2.5 concentration control targets were estimated for 2020. The economic value of health loss in China was 3205.05, 3223.51, and 3344.80 billion Yuan in 2015, 2016, and 2017, representing 4.34%, 4.07%, and 3.85% of the gross domestic product of China. The health loss value in Beijing–Tianjin–Hebei (BTH) and surrounding areas and the Yangtze River Delta (YRD) urban agglomeration in 2017 was 731.93 and 520.27 billion Yuan, accounting for 21.88% and 15.56%, respectively, of the total economic value of all assessed cities. The economic value of health loss in provincial cities was high. From 2015 to 2017, high health loss in BTH and surrounding areas showed a diffusion trend toward cities in Henan, Shanxi, and Shaanxi Provinces. High health loss in the YRD urban agglomeration transferred to cities located in the middle and upper reaches of the Yangtze River. If PM 2.5 concentration control targets can be achieved by 2020, premature mortality attributed to PM 2.5 exposure will fall by 91,860 cases, representing 11.20% of which in 2017. This study, for the first time, highlighted the spatial distribution and temporal variation characteristics of health loss in Chinese cities based on ground-monitoring PM 2.5 concentration data and annual real-time population data. Distributional feature and time-trend analysis would provide a measurable assessment of health loss in Chinese cities to policymakers for effective allocating their efforts on air quality improvement. Graphical abstract Economic value of public health loss attributed to PM 2.5 exposure at the city level in 2017. Image 1 Highlights • We assessed the annual health loss and economic impact of PM 2.5 exposure in China. • We used PM 2.5 and population data (2015–2017) of prefecture-level cities or above. • Health loss declined from 0.91 (2015) to 0.82 (2017) million premature mortalities. • Annual economic value of health loss increased but declined as a percent of GDP. • Meeting updated PM 2.5 targets by 2020 could reduce mortality by 11% of 2017 levels. [ABSTRACT FROM AUTHOR]

• Atypical clinical features make it hard to identify VL in HLH in non-epidemic area. • VL is difficult to diagnose when traditional tests are ineffective, while mNGS is. • mNGS can be used as a detection method of HLH in children caused by rare pathogens. Visceral leishmaniasis-related hemophagocytic lymphohistiocytosis (VL-HLH) is a secondary hemophagocytic syndrome, which can be life-threatening, caused by leishmania and transmitted by infected sandflies. Rapid and accurate identification of leishmania is crucial for clinical strategies. Here, we report an infantile infection in a non-epidemic area of China. The infant was a 9.5-month-old girl with fever, pancytopenia and hepatosplenomegaly, which meet the HLH-2004 standard, and the negative gene results exclude congenital HLH. However, chemotherapy is ineffective and is accompanied by severe infection. Fortunately, she is diagnosed with VL-HLH (visceral leishmaniasis-related hemophagocytic lymphohistiocytosis), as leishmania is detected by next-generation meta-genome sequencing (mNGS) and quickly relieved after treatment with libosomal amphotericin B (L-AMB). mNGS can detect leishmania in pediatric HLH, and should be performed as a new detection for VL-HLH, particularly for infants, who may not respond to HLH-2004 regimen. [ABSTRACT FROM AUTHOR]

Predictability in the aviation system affects costs to airlines and passengers. We propose a predictability metric based on a flight's gate-in fuel (GIF) which can be directly measured and monetized by aviation stakeholders. We estimate GIF for six major U.S. airlines. Since GIF data are not directly available, we develop an estimation methodology to obtain GIF from pushback weight and fuel burn, including a conversion from passenger to weight payload based on an econometric model. The methodology accounts for aircraft operating empty weight and payload. We find that GIF varies across airlines and time of year, and is highest during the summer period. We monetize GIF through a cost-to-carry analysis as extra fuel loading results in additional fuel burn. Our estimates reveal that, in 2012, airlines spent an additional $59 million to $667 million on carrying GIF, with a total across all six airlines of $1.46 billion. [ABSTRACT FROM AUTHOR]

With the implementation of the western development strategy, large areas in western China are experiencing rapid industrialization and urbanization phases. Simultaneously, increasing energy consumption linked to CO 2 emissions is becoming a serious problem. The stochastic impacts by regression on population, affluence, and technology model and the random parameters model were developed to assess and quantify the strength of the relationship between CO 2 emissions that are attributed to energy consumption and their major drivers (i.e., population, economy, and technology). The Ningxia Hui Autonomous Region, which is a typical region in western China with low energy efficiency and rapid economic growth, was selected as an example. This study determined CO 2 emissions attributed to energy consumption from 1991 to 2011, and assessed the effects of the major drivers of CO 2 emissions at the county level. The following results were obtained. (1) The CO 2 emissions of Ningxia increased rapidly throughout the study period. (2) Increasing gross domestic product (GDP) per capita, urban employment, and the contribution to GDP of secondary industries would promote CO 2 emissions. By contrast, increasing the growth of the per capita annual disposable income of rural households, the contribution to GDP of tertiary industries, and population density would restrain CO 2 emissions. (3) The county-level heterognerity was found to be significant which suggests adopting a uniform policy might not be optimal. Finally, the study method, effects of CO 2 emission factors, and policy suggestions could also be applied to other provinces and autonomous regions in western China because of the similar characteristics of these areas such as vast lands, rich resources, and low development level. [ABSTRACT FROM AUTHOR]

The temporal-spatial distributions of DDT-related contaminants (DDXs), including DDT (dichlorodiphenyltrichloroethane), DDE (dichlorodiphenyldichloroethylene) and DDD (dichlorodiphenyldichloroethane), in the sediments of Lake Chaohu and their influencing factors were studied. p,p-DDE and p,p-DDD were found to be the two dominant components of DDXs in both surface and core sediments. The parent DDT compounds were still detectable in sediment cores after the late 1930s. Historical usage of technical DDT was identified as the primary source of DDXs in sediments, as indicated by DDT/(DDD + DDE) ratios of less than one. The residual levels of DDXs were higher in the surface and core sediments in the western lake area than in other lake areas, which might be due to the combined inflow effects of municipal sewage, industrial wastewater and agricultural runoff. The DDX residues in the sediment cores reached peak values in the late 1970s or early 1980s. There were significant positive relationships between DDX residues in sediment cores with annual DDT production and with fine particulate sizes (<4.5 μm). The relationship between the DDXs and TOC in sediment was complex, as indicated by the significant differences among the surface and core sediments. The algae-derived organic matter significantly influenced the amount of residue, composition and distribution of DDXs in the sediments. The DDD/DDE ratios responded well to the anaerobic conditions in the sediments that were caused by algal blooms after the late 1970s in the western lake area. This suggests that the algae-derived organic matter was an important factor and served as a biomarker of eutrophication and also affected the DDX residues and lifecycle in the lake ecosystem. [ABSTRACT FROM AUTHOR]

Phase change materials (PCMs) are potential candidates in passive thermal regulation and energy storage fields due to their high latent heat capacity around phase transition temperature. However, the leakage problem and low thermal conductivity are two obstructive factors for the extended application of PCMs. Herein, a series of paraffin@silicon dioxide microcapsules (Pa@SiO 2)/graphene sheets (GS)/silicone rubber (SR) phase change composites (PCCs) were prepared. It is found that the inorganic SiO 2 shell is conducive to enhancing the thermal conductivity of PCCs and the double encapsulation by the SiO 2 shell and SR skeleton can restrict the leakage of liquid Pa during phase transition. With a Pa@SiO 2 content of 70 wt%, the PCCs have a high latent heat of 126.1 J/g and enhanced thermal conductivity of 0.37 W m−1 K−1, which is 131.25% higher compared to that of pure SR. In addition, the introduction of graphene sheets further boosts the thermal conductivity of PCCs to 2.69 W m−1 K−1. The obtained PCCs lead to a surprising temperature decline of nearly 35 °C of a commercial lithium-ion battery during a high discharge rate (7.4 C). This work provides an efficient route to fabricate microcapsules-based PCCs for passive thermal regulation. [Display omitted] [ABSTRACT FROM AUTHOR]

As a symbolic ceramic oxide, the reaction of SiO 2 as an insulating layer with the Fe–Si–Al/SiO 2 soft magnetic composites (SMCs), substrate during heat treatment, as well as the resulting microscopic phase transition of the core–shell structure and its influence on the magnetic properties, are worth investigating. In this study, based on the successful synthesis of Fe–Si–Al based SMCs using fluidised chemical vapour deposition combined with an electric hot–press sintering method, the evolution of the insulating layers was investigated under different heat–treatment temperatures and closely linked to the magnetic performance of the composites. During heat treatment at high temperatures, the formation of high–resistivity oxides (Al 2 O 3) after heat treatment results in a low inter–particle eddy current loss, while excessive temperature causes disintegration of the core–shell heterostructure. This leads to a discernible increase in eddy current and hysteresis losses and a decrease in permeability and resistivity. The SMCs had an Ms of 115.8 emu/g, a resistivity of 6.86 mΩ cm, and a hysteresis loss of 56.3 kW/m3 at 10 mT and 100 kHz when heat-treated at 1373 K for 120 min, which was the best among all samples. This research provides a novel approach to building SMCs with inorganic ceramic insulating layers and a comprehensive understanding of the relationship between the heat–treatment process parameters, microstructure, and magnetic properties which is highly significant for industrial production. [Display omitted] [ABSTRACT FROM AUTHOR]

Thermal interface materials (TIMs) with high through-plane thermal conductivity (TC), softness, and electrical insulation are highly desired for modern electronics. However, it is challenging to simultaneously achieve these properties. Boron nitride (BN)-based polymer composites are promising candidates for advanced TIMs owing to the high TC and great electrical insulation of BN. However, previous works perform either low TC (< 8 W m−1 K−1) or high stiffness. The ultimate properties of BN-based TIMs remain largely unclear and unrealized. Here, we fabricate BN film-filled silicone rubber composites by a facile stacking-cutting method, which maintains the high degree of orientation the BN film, so that a record-high though-plane TC of 19.1 W m−1 K−1 and a low compressive modulus of 5.42 MPa are achieved. The low BN content (37 vol%) ensures the softness and resilience of the as-prepared TIMs. This work presents a highly efficient strategy to enhance the performance of BN based TIMs, promoting their large-scale manufacturing and practical applications. • Thermal interface materials based on boron nitride film (BNF) were fabricated by a facile stacking-cutting method. • The composites exhibit a high degree of orientation and densely overlapped structures. • The composites show a record-high though-plane TC of 19.1 W m−1 K−1 at 37 vol% BN content and a low compressive modulus of 5.42 MPa. [ABSTRACT FROM AUTHOR]

High thermally conductive materials with good electrical insulating and mechanical properties are indispensable for electronics. Aiming for all-polymer composites with light weight, electrical insulation and high thermal conductivity (TC), ultrahigh molecular weight polyethylene (UHMWPE) fibers/epoxy composites with two kinds of fiber orientation structures (0°/90°, ±45°) were fabricated by hot-pressing. It is found that the in-plane TC of ±45° composite is approximately 1.3–1.4 times that of 0/90° one, and the corresponding mechanism is verified by finite element simulation and model calculation. Thermally conductive pathways formed by UHMWPE fibers endow 0/90° and ±45° composites with the in-plane TC of 9.94 and 13.61 Wm−1K−1, respectively. Through depositing polydopamine (PDA) and grafting polyether amine (PEA) onto the surface of fibers, the poor fiber/epoxy interface was improved, resulting in 40.7% and 52.3% improvement in interlaminar shear strength (ILSS) and shear modulus, respectively. Simultaneously, a higher in-plane TC as high as 15.76 Wm−1K−1 is achieved. The heat dissipation evaluation indicates that the composite can reduce the temperature of the resistance wire by 14 °C. This work reveals the great potential of UHMWPE fibers in heat dissipation and provides a strong candidate for electrical insulating support materials with high TC for heat management of electronics. [Display omitted] [ABSTRACT FROM AUTHOR]

The first two members in the quaternary A/A′/M/Q (A = alkali metal; A′ = alkaline-earth metal; M = As, Sb, Bi; Q = S, Se, Te) system, namely the KBaMSe 3 (M = As, Sb) selenides, have been synthesized by solid state reactions. They are isostructural and crystallize in the centrosymmetric space group P 2 1 / c of the monoclinic system. In the structure, the trivalent M atom (M = As, Sb) is coordinated to three Se atoms forming a trigonal pyramid with the Se atoms serving as the triangle base, showing the stereochemical activity of the ns 2 lone pair electron. The MSe 3 (M = As, Sb) trigonal pyramids are totally isolated from each other with K + and Ba 2+ cations located between them. The optical band gaps of 2.26 (2) eV for KBaAsSe 3 and 2.04 (2) eV for KBaSbSe 3 , were deduced from the diffuse reflectance spectra. The first principles calculations were performed to study the electronic structures of KBaMSe 3 (M = As, Sb) compounds and the results indicated that these two compounds are indirect band gap semiconductors. [ABSTRACT FROM AUTHOR]

• Ag–Cu NAs effectively inhibited the E. coli and S. aureus growth. • In Ag–Cu NAs, the strong charge-transfer leads to an earlier dissolution of Ag+. • The Ag+ ion dissolution is correlated with the antibacterial activity of Ag–Cu NAs. Immiscible bimetallic Ag–Cu system has been synthesized by the pulsed plasma in liquid method with a graph of one pulse duration. Herein, by combining X-ray power diffraction, K-edge X-ray absorption near edge structure and high-resolution transmission electron microscopy, our results indicate that homogeneously alloyed Ag–Cu nanoparticles (Ag–Cu NAs) have the average diameter about 2.1 nm, composed by 48.5 at% Ag and 51.5 at% Cu with chemical analysis and the estimated lattice parameter was 3.873 Å. The antibacterial property of Ag–Cu NAs was detected against E. coli and S. aureus strains according to the colony formed abilities of bacteria on agar plates covered with the nanoparticles. With very short incubation period, Ag–Cu NAs completely inhibited the E. coli and S. aureus growth at an ultralow concentration. The mechanism of antibacterial property of Ag–Cu NAs was performed by the inductively coupled plasma-atomic emission spectrometry and the plane wave pseudopotential method implemented in the CASTEP package based on the density functional theory. The Ag+ dissolution is correlated with antibacterial activity for Ag–Cu NAs-assisted antibacterial treatment. These findings obtained revealed that our Ag–Cu NAs could be served as a containing material of numerous bacteria-free products in order to avoid their bacterial contamination. [ABSTRACT FROM AUTHOR]

Air pollution and climate change are issues of worldwide concern. Synergizing air pollution control and climate mitigation have been an important national policy of China. This study develops bivariate and integrated synergy indexes (BSI and ISI) to investigate the synergy states between air pollution and CO 2 emission. The synergy indexes are based on the correlation coefficient and established from exploiting the internal comparability of the data. Using the BSI and ISI , we evaluated the correlation and synergy states between air pollution (involving ambient PM 2.5 and ozone) and CO 2 emission in Chinese cities from 2015 to 2020. The results present the city-level trends and heterogeneities of synergy between air pollution and CO 2 emission. The averaged value of BSI PM2.5-ozone , BSI PM2.5-CO2 , and BSI ozone-CO2 for all cities and assessing years were −0.239, −0.291, and −0.242, indicating a generally and globally weak synergy. The synergy states between air pollution and CO 2 emission were relatively significant and complex in specific regions. Combined with the local spatial association and decoupling analysis, we further identified the primary variables and key areas for synergistic control. This study provides a systematic idea and case demonstration for city-level synergy assessment through transforming and expanding the data usage capacity. The method and process are applicable to various scales and regions, which would be of reference value for synergy assessments in other countries and regions. [Display omitted] • We developed the bivariate and integrated synergy indexes. • We evaluated the synergy between air pollution and CO 2 emission at the city-level. • Local spatial association and decoupling analysis supported the synergy assessment. • Most Chinese cities show insignificant synergy of air pollution and CO 2. • BTHS, YRD, and the JJAH are key areas. [ABSTRACT FROM AUTHOR]

Summary Aerobic glycolysis (the Warburg effect) facilitates tumor growth, and drugs targeting aerobic glycolysis are being developed. However, how the Warburg effect is directly regulated is largely unknown. Here we show that transcription factor SIX1 directly increases the expression of many glycolytic genes, promoting the Warburg effect and tumor growth in vitro and in vivo . SIX1 regulates glycolysis through HBO1 and AIB1 histone acetyltransferases. Cancer-related SIX1 mutation increases its ability to promote aerobic glycolysis and tumor growth. SIX1 glycolytic function is directly repressed by microRNA-548a-3p, which is downregulated, inversely correlates with SIX1, and is a good predictor of prognosis in breast cancer patients. Thus, the microRNA-548a-3p/SIX1 axis strongly links aerobic glycolysis to carcinogenesis and may become a promising cancer therapeutic target. [ABSTRACT FROM AUTHOR]

Bronchoscopic cryotherapy facilitates the treatment of endobronchial tuberculosis (EBTB) and helps suppress progressive bronchial stenosis. However, the molecular mechanism of bronchoscopic cryotherapy in EBTB patients has not been reported. Transcriptome sequencing was performed to explore differentially expressed mRNAs (DEGs) in EBTB patients before and after bronchoscopic cryotherapy. Gene Ontology (GO) and KEGG analyses were carried out. Five genes (MKLN1 , HIGD1A , PTGES , SKIL , and MCEMP1) were selected and validated using real-time qPCR (RT- qPCR). In transcriptome analysis, 448 DEGs with p < 0.05 and|logFC| > 1 were identified; of these, 171 and 277 DEGs were significantly up- and down-regulated after bronchoscopic cryotherapy, respectively. Results displayed 337 biological process (GO-BP), 48 cellular component (GO-CC) and 62 molecular function (GO-MF) terms and 20 KEGG pathways. RT- qPCR results were consistent with the sequencing data. These data provide informative evidence and recommendations for further scientific research on bronchoscopic cryotherapy for EBTB. • We firstly identified transcriptome map of EBTB patients before and after bronchoscopy cryotherapy treatment. • The results showed that 448 DEGs (171 upregulated and 277 downregulated) were obtained between BCT group and ACT group. • These results provide a theoretical basis for further exploring the molecular mechanism of bronchoscopy cryotherapy for EBTB. [ABSTRACT FROM AUTHOR]

Highlights: [•] Three new chalcohalides: Ba4Ge2PbS8Br2, Ba4Ge2PbSe8Br2 and Ba4Ge2SnS8Br2 have been synthesized. [•] The MQ5Br octahedra and GeQ4 tetrahedra form a three-dimensional framework with Ba2+ in the channels. [•] Band Gaps and electronic structures of the three compounds were studied. [ABSTRACT FROM AUTHOR]