Search

Developing BEPS models which predict energy usage to a high degree of accuracy can be extremely time consuming. As a result, assumptions are often made regarding the input data required. Making these assumptions without introducing a significant amount of uncertainty to the model can be difficult, and requires experience. Even so, rules of thumb from one geographic region are not automatically transferrable to other regions. This paper develops a methodology which can be used to determine useful guidelines for defining the most influential input data for an accurate BEPS model. Differential sensitivity analysis is carried out on parametric data gathered from five archetype dwelling models. The sensitivity analysis results are used in order to form a guideline minimum set of accurately defined input data. Although the guidelines formed apply specifically to Irish residential dwellings, the methodology and processes used in defining the guidelines is highly repeatable. The guideline minimum data set was applied to practical examples in order to be validated. Existing buildings were modelled, and only the parameters within the minimum data set are accurately defined. All building models predict annual energy usage to within 10% of actual measured data, with seasonal energy profiles well-matching. [ABSTRACT FROM AUTHOR]

Variable refrigerant flow (VRF) systems vary the refrigerant flow to meet the dynamic zone thermal loads, leading to more efficient operations than other system types. This paper introduces a new model that simulates the energy performance of VRF systems in the heat pump (HP) operation mode. Compared with the current VRF-HP models implemented in EnergyPlus, the new VRF system model has more component models based on physics and thus has significant innovations in: (1) enabling advanced controls, including variable evaporating and condensing temperatures in the indoor and outdoor units, and variable fan speeds based on the temperature and zone load in the indoor units, (2) adding a detailed refrigerant pipe heat loss calculation using refrigerant flow rate, operational conditions, pipe length, and pipe insulation materials, (3) improving accuracy of simulation especially in partial load conditions, and (4) improving the usability of the model by significantly reducing the number of user input performance curves. The VRF-HP model is implemented in EnergyPlus and validated with measured data from field tests. Results show that the new VRF-HP model provides more accurate estimate of the VRF-HP system performance, which is key to determining code compliance credits as well as utilities incentive for VRF technologies. [ABSTRACT FROM AUTHOR]

Traditionally, in building energy modeling (BEM) programs, occupant behavior (OB) inputs are deterministic and less indicative of real world scenarios, contributing to discrepancies between simulated and actual energy use in buildings. This paper presents a new OB modeling tool, with an occupant behavior functional mock-up unit (obFMU) that enables co-simulation with BEM programs implementing functional mock-up interface (FMI). The components detailed in the development of the obFMU include an overview of the DNAS (drivers-needs-actions-systems) ontology and the occupant behavior eXtensible Markup Language (obXML) schema, in addition to details on the creation of the obFMU that contains the co-simulation interface, the data model and solvers. To demonstrate functionality of the tool, three examples of occupant behaviors were simulated, including: (1) turning on and off lights, (2) opening and closing windows, and (3) turning on and off the air conditioners. The obFMU can be used via co-simulation with all building simulation programs that implement the FMI, thus users are not limited to a particular tool. Another advantage is the use of obXML schema to represent occupant behavior, standardize the description of occupant behavior enabling information exchange. [ABSTRACT FROM AUTHOR]

The paper presents the results of 1-year measurement of indoor environment parameters (temperature, relative humidity, CO 2 concentration) in exhibition rooms of one Polish museum in various periods of the year, and the results of simulation on thermal model of this building. The influence of a temperature control scheme in museum rooms on heating and cooling demand was analysed. The actual state (poor control of internal temperature) and ideal control of internal temperature were analysed – two cases in the winter and two cases in the summer. Simulations were performed by ESP-r program. The multi-zone model of the building was validated based on measurement data. Measurements and simulations revealed significant variations in the temperature in the rooms of the museum. The analysis showed that the maintaining internal temperature at constant level of 20 °C in winter reduces monthly heat demand in most of the exhibition rooms. Obtained effect is 5–16% depending on the premises. Provision the raise of a temperature by 1 K results in the increase of heat consumption by 6%. Maintenance of a desired internal temperature, which does not exceed 24 °C in the summer, requires the provision of coolness to the museum premises. [ABSTRACT FROM AUTHOR]