Search

• Automatic MiC envelopes and layout generation by a novel SSG-MOO method. • Multi-objective optimization formulation for passive MiC design. • A pilot MiC study in Hong Kong produced 5 selected Pareto optima out of 625. • Up to 0.42% energy savings and 9.71% spatial daylight autonomy improvement against the baseline. • A multi-level analysis of results and design strategies for practitioners. Modular-integrated Construction (MiC) is an emerging construction technique promoted in the building sector for high productivity and low waste emission in the construction phase; yet, the standardized modules also bring new challenges, such as balancing passive energy efficiency and spatial daylight autonomy, to the operational phase. This paper proposes a Symmetric Skeleton Grammar-based Multi-Objective Optimization (SSG-MOO) method to formulate parametric MiC envelopes and detailed layout, with the two objective functions being energy efficiency and interior daylight performance in the operational phase. Pareto optima of the SSG-MOO, computed by the Non-dominated Sorting Genetic Algorithm II, are generally verified and analyzed in three levels, i.e., MOO's solution space, SSG layout, and MiC design parameters. A case study of MiC residential building in Hong Kong demonstrated the SSG-MOO method through five new passive MiC designs (i.e., spatial reorganization of three architectural modules, and parameter tuning of the envelops and corridors), achieving up to 0.42% energy savings and 9.71% spatial daylight autonomy improvement compared to the baseline design. The contribution of this paper is two-fold, including a novel and sound SSG-MOO formulation for parametric MiC designs, and offering time-efficient and evidence-based design tactics for MiC designers and industrial practitioners to push boundaries of MiC. [ABSTRACT FROM AUTHOR]

Buildings are responsible for about 92% of the total energy end-use in Hong Kong, of which above 70% is from the commercial sector. Most of the buildings in Hong Kong are high-rise, and approximately 15% of the total building stock is commercial buildings. Despite the considerable improvement in the understanding of the life cycle energy use of office buildings, there is still a lack of research into the life cycle energy demand of high-rise office buildings. Such knowledge is however essential for facilitating building energy conservation in the high-rise urban environment. The aim of this paper is to investigate the life cycle energy use of high-rise office buildings. The research was carried out through a critical literature review and case studies of ten real-life high-rise office buildings in Hong Kong. Results show that the life cycle energy consumption is 51.78–73.64 GJ/m 2 over the 50-year study period. Building operation consumes 78–89% and the rest (i.e. 11–22%) is taken by the embodied energy. Despite the distinction in terms of the amount of embodied energy between high-rise buildings and low-rise counterparts, no clear correlation is found between building height and embodied energy intensity. Moreover, energy use for material manufacturing and transport should be prioritised in reducing the embodied energy, of which the transport energy needs to be taken into extra consideration for the case of Hong Kong. The findings should inform construction industry participants of the significant potential in reducing the embodied energy of high-rise office buildings. The paper profiles the life cycle energy use of high-rise office buildings and should be important for the policy formulation towards the holistic energy conservation in high-rise buildings over their lifespans. [ABSTRACT FROM AUTHOR]

Abstract: The shading-type building-integrated photovoltaic (BIPV) claddings can act as power generators as well as external shading devices of a building, which reduce the energy consumption of the building. However, there is little information about energy impacts of different tilt angles of the shading-type BIPV claddings. By considering the typical meteorological conditions of Hong Kong, the energy performance of the shading-type BIPV claddings, in terms of the electricity generation and the cooling load reduction, is analyzed in this paper. The optimum tilt angle of PV modules for maximum electricity generation is found to be 20° instead of local latitude. Combining electricity generation and cooling load reduction, it can be concluded that the optimum tilt angles for the first type of the shading-type BIPV claddings vary from 30° to 50°, while the optimum tilt angle for the second type is 0°. [Copyright &y& Elsevier]