Search

• Automatic MiC envelopes and layout generation by a novel SSG-MOO method. • Multi-objective optimization formulation for passive MiC design. • A pilot MiC study in Hong Kong produced 5 selected Pareto optima out of 625. • Up to 0.42% energy savings and 9.71% spatial daylight autonomy improvement against the baseline. • A multi-level analysis of results and design strategies for practitioners. Modular-integrated Construction (MiC) is an emerging construction technique promoted in the building sector for high productivity and low waste emission in the construction phase; yet, the standardized modules also bring new challenges, such as balancing passive energy efficiency and spatial daylight autonomy, to the operational phase. This paper proposes a Symmetric Skeleton Grammar-based Multi-Objective Optimization (SSG-MOO) method to formulate parametric MiC envelopes and detailed layout, with the two objective functions being energy efficiency and interior daylight performance in the operational phase. Pareto optima of the SSG-MOO, computed by the Non-dominated Sorting Genetic Algorithm II, are generally verified and analyzed in three levels, i.e., MOO's solution space, SSG layout, and MiC design parameters. A case study of MiC residential building in Hong Kong demonstrated the SSG-MOO method through five new passive MiC designs (i.e., spatial reorganization of three architectural modules, and parameter tuning of the envelops and corridors), achieving up to 0.42% energy savings and 9.71% spatial daylight autonomy improvement compared to the baseline design. The contribution of this paper is two-fold, including a novel and sound SSG-MOO formulation for parametric MiC designs, and offering time-efficient and evidence-based design tactics for MiC designers and industrial practitioners to push boundaries of MiC. [ABSTRACT FROM AUTHOR]

Energy consumption of lift systems is one key issue in modern high-rise buildings, drawing property owners' attention and accounting for 6% of total electricity consumption by end-use in Hong Kong. A Benchmarking Energy Performance Indicator (BEPI), , measured in J.kg−1.m−1 and proposed by the first author of this paper for lift installations is mentioned in the Technical Guidelines of the Building Energy Code , as one emerging good engineering practice. BEPI is a fair parameter for comparing energy performance of lifts irrespective of their brand, model, travel, speed, capacity and control. It considers energy performance due to both the motor drive efficiency and traffic control intelligence. However, one main obstacle to make it statutory is the lacking of a generic monitor able to retrieve three sets of real time data (normally unavailable on an existing lift) to compute the BEPI, namely energy consumption, instantaneous car load and traveling distance, and to collect ample data statistically reliable enough to determine an acceptable threshold value. This paper describes the development of a proof-of-concept prototype BEPI monitor by giving full technical details on the rationale and history of development, the hardware components, software framework, and updated numerical results of one implementation inside the headquarters of Electrical & Mechanical Services Department (EMSD) of HKSAR. Experiences in installing and calibrating those external sensors that make the whole system non-disturbing to normal lift operation, as well as the procedures in computing the BEPI, are discussed in greater details. It has been shown that the BEPI is traffic dependent but the weekly average of it is relatively stable, confirming it may be robust enough for benchmarking purpose. The solution described in this paper may help roll out the monitoring of BEPI for all lifts inside and outside Hong Kong. [ABSTRACT FROM AUTHOR]

Abstract: Energy consumption by passenger transport in Hong Kong increased rapidly in the past decades and in 2008 it accounted for 19.7% of total energy use. Improving energy efficiency has been widely regarded as an effective way for reducing energy use in the transport sector. However, the expected energy savings from energy efficiency improvement are likely to be discounted due to the existence of rebound effect. This paper employs econometric models to estimate the direct rebound effect for private passenger transport in Hong Kong. We find that the magnitudes of the direct rebound effect are respectively 45% and 35% for 1993–2009 and 2002–2009, which indicates that there was a declining trend in the direct rebound effect for passenger transport over time. It also indicates that the direct rebound effect needs to be taken into consideration in assessing the impact of energy efficiency measures on reducing energy use in Hong Kong. [Copyright &y& Elsevier]

Abstract: A benchmark study of the energy efficiency of private office buildings in Hong Kong was conducted in 2002 because energy efficiency was declining. In the study, private office buildings were divided into five user groups. For each group, a multiple regression model was developed to find the relationship between Energy Use Intensities (EUIs) and other factors, such as operating hours, for normalization and benchmarking purposes. In this paper we make use of the regression results to study the energy efficiency of private office buildings by different grades. In Hong Kong, office buildings are divided into three grades (A, B, and C) based on the quality of the facility, which is reflected in rental values; a Grade A office building denotes expensive luxury. We found that the EUI of Grade A office buildings is the highest, consuming over 50% of the total energy used in office buildings. Recently, the annual EUI of office buildings has improved even though Grade A floor space is increasing. This may be due to the promotion of the energy efficiency program launched in the last decade. [Copyright &y& Elsevier]