Search

The paper presents an integrated approach aimed at assessing the seismic safety of Mallorca cathedral. This cathedral is an extraordinary historical construction dating back to the middle-ages. The experimental modal parameters of the cathedral were identified using Ambient Vibration Testing (AVT). The cathedral numerical model was updated using the identified modal parameters. This updated model was then used to study the seismic response of the cathedral using non-linear static (pushover) analysis. A sensitively analysis was carried out to reveal the dependency of the seismic capacity on the input materials properties. To assess the seismic performance and the safety of the cathedral, the N2 method was employed. It was found that the cathedral is safe when subjected to the earthquakes expected in Mallorca Island. [ABSTRACT FROM AUTHOR]

In this paper, a case study of performing a reliable statistical procedure to evaluate the quality of HVAC systems in buildings using data retrieved from an ad hoc big data web energy platform is presented. The proposed methodology based on statistical quality control (SQC) is used to analyze the real state of thermal comfort and energy efficiency of the offices of the company FRIDAMA (Spain) in a reliable way. Non-conformities or alarms, and the actual assignable causes of these out of control states are detected. The capability to meet specification requirements is also analyzed. Tools and packages implemented in the open-source R software are employed to apply the different procedures. First, this study proposes to fit ARIMA time series models to CTQ variables. Then, the application of Shewhart and EWMA control charts to the time series residuals is proposed to control and monitor thermal comfort and energy consumption in buildings. Once thermal comfort and consumption variability are estimated, the implementation of capability indexes for autocorrelated variables is proposed to calculate the degree to which standards specifications are met. According with case study results, the proposed methodology has detected real anomalies in HVAC installation, helping to detect assignable causes and to make appropriate decisions. One of the goals is to perform and describe step by step this statistical procedure in order to be replicated by practitioners in a better way. [ABSTRACT FROM AUTHOR]

Monitoring is required when dewatering underground construction sites to anticipate unexpected events and preserve nearby existing structures and/or buildings. The most accurate and widespread monitoring method to measure displacements is leveling, a point-like surveying technique that typically allows for tens of discrete in situ sub-millimeter measures per squared kilometer. Another emerging technique for mapping soil deformation is the interferometric synthetic aperture radar (InSAR) method, which is based on SAR images acquired from orbiting satellites. This remote sensing technique can provide better spatial point density than leveling, more extensive spatial coverage and lower-cost acquisitions. This paper analyses, compares and discusses leveling and advanced multi-temporal InSAR measurements when they are used to measure the soil deformation induced by the dewatering associated with underground constructions in urban areas. This comparison, which has not been considered in previous works, is of paramount importance to ascertain the most suitable technique (or combination of techniques) in these contexts. To do so, an experiment was performed in the future railway station of La Sagrera, Barcelona (Spain), in which leveling and advanced multi-temporal InSAR were used to quantify ground deformation by dewatering. The results showed that soil displacements measured by leveling and InSAR were not always consistent. In the context of soil deformation measurements produced by dewatering in urban areas, InSAR measurements appear to be more accurate for investigating soil deformation, whereas leveling was more appropriate for quantifying the real impact on the nearby buildings. [ABSTRACT FROM AUTHOR]

Environmental sustainability in the wine sector has become a priority, as a result of both the growing interest in environmental issues and the consumer's demand for more information regarding the environmental impact of the products they purchase. In this context, the use of carbon footprint as an indicator to assess and report the environmental burdens associated with wine production has gained a role of primary interest. The present study has the aim of improving the wine sector's sustainability by providing inventory data on wine production systems from a total of 18 wineries located in major wine-producing regions in Spain and the South of France. The main novelty of this paper is: the corporate carbon footprint approach, the greater number of wineries studied, the diversity of location of those wineries, the detail of data presented and the identification of the best reference flow for vineyards. Data was statistically analysed. Vineyard consumptions are usually related to the area of cultivation. However, although 1 ha of vineyard or 1 kg of harvested grape could both be considered good reference flows for vineyard processes, this study shows a greater standard deviation of average data calculated per ha rather than per kg. Impact results show a major contribution of the winery phase to the corporate carbon footprint (73%), mainly due to glass production for bottling (45.6% contribution) and electricity consumption (9.2%). In the vineyard phase, contribution comes mainly from diesel production and combustion due to field works (11.3%) and the use of phytosanitary products (6.0%). The results revealed that with the establishment of best practices and with optimized resource consumption, the corporate carbon footprint values can be reduced by almost 25%. The comparative results presented can be used as a reference that will enable wineries to compare their impacts to the average, to identify in which aspects they are within the average and which aspects they are outside the average and whether these aspects are significant to their carbon footprint. This may encourage wineries to adopt measures for Eco-innovation through carbon emission reduction. [ABSTRACT FROM AUTHOR]

Abstract: The paper has three objectives: firstly, to evaluate how the extent of clustering in wildfires differs across the years they occurred; secondly, to analyse the influence of covariates on trends in the intensity of wildfire locations; and thirdly, to build maps of wildfire risks, by year and cause of ignition, in order to provide a tool for preventing and managing vulnerability levels. For these objectives we analysed the spatio-temporal patterns produced by wildfire incidences in Catalonia, located in the north-east of the Iberian Peninsula. The methodology used has allowed us to quantify and assess possible spatial relationships between the distribution of risk of ignition and causes. These results may be useful in fire management decision-making and planning. The methods shown in this paper may contribute to the prevention and management of wildfires, which are not random in space or time, as we have shown here. [Copyright &y& Elsevier]

Abstract: The present paper focuses on a particular kind of TV talk show: one that, in view of its longevity and audience size, may be said to be very successful with TV viewers in Spain. The host in this style of programme is in one sense the key participant, controlling and guiding conversation with and between guests. The analysis of two different programmes featuring four different hosts has shown that there are certain linguistic patterns that are systematically used by all of them and that directly relate to their role and their goals as managers of this kind of show. This paper focuses on the most pervasive patterns that appear in the main section of the programme: the host–guest interactions. It argues that there is a particular discursive style that is role-related and that the hosts strategically use to achieve certain goals through the show. [Copyright &y& Elsevier]

Abstract: Debates on degrowth have mainly focused on theoretical issues, specially around the unsustainability of the current economic model based on growth. Along those lines some scholars have dealt with the opportunities and barriers to voluntary social action for degrowth at a general level. Notwithstanding the key importance of such debates, we argue that local strategies to move towards degrowth are still to be explored. Departing from the specific case of water, in this paper we interrogate the compatibility of non-conventional centralised and decentralised water supply technologies (desalination, reclaimed water reuse, greywater reuse and rainwater harvesting) with degrowth principles. Taking as a case study the Metropolitan Area of Barcelona (Spain), a social multi-criteria evaluation has been performed to explore the feasibility, desirability and acceptability of both models. The paper aims to explore the pros and cons of the different water alternatives in two different (and hypothetic) societies: one based on growth (business-as-usual) and one based on degrowth. The technical analysis reveals that rainwater harvesting and reclaimed water reuse are the most preferred alternatives from a degrowth perspective while reclaimed water reuse and desalination are the most preferred alternatives from a growth perspective. The social multi-criteria analysis also serves to unveil which social actors may favour or block the adoption of each alternative. Notwithstanding that most social groups see desalination as the least desired option, this is the hegemonic non-conventional source in Spain which evidences the prevalence of growth discourses in water management. Local decision-makers, city council managers and environmental groups clearly opt for the promotion of rainwater harvesting and as a result, they appear as potential allies to promote degrowth in water consumption. The social multi-criteria evaluation helps to elucidate the main challenges that need to be addressed in the pursuit of a more sustainable and equitable water management. [Copyright &y& Elsevier]

Gully erosion represents one of the most significant types of land degradation in the Mediterranean areas, giving place to important on- and off-site effects. In this paper, a second-order gully located in SW Spain is analyzed. Along the gully, 28 cross-sections were established and measured with a Leica TCRM1102 laser total station, approximately every 6 months from 2001 to 2007. The sections were located at variable distance, placing them in areas where active erosion was evident. In total, 13 field measurements were carried out, and the geometric characteristics of 28 cross-sections were obtained. Morphometric analyses were carried out in both the main gully and a tributary reach by applying an empirical relationship between channel length and eroded volume. Morphometric variables of the gully sections were combined into two dimensionless groups, and a morphological similarity between different linear erosion landforms (rills, ephemeral and permanent gullies) was obtained. Then, the coefficient of variation of the calculated volumes was used to compare the instability between the main gully and the tributary reach. Finally, the hydraulic geometry of the gully was assessed by calibrating three empirical power equations, which relate bankfull discharge with mean flow velocity, cross-sectional depth and width. The hydraulic characterization of the main gully and the tributary reach was investigated for each field survey and a different behavior was detected. The hydraulic analysis also demonstrated that higher values of discharge provide better predictions of flow velocity; the size of the main and tributary gullies affects the discharge–width relationship; and that gully depth is the variable which can be predicted with the highest accuracy. [ABSTRACT FROM AUTHOR]

In recent years, respect for the environment has been taken into account by tourists as a factor in their purchasing decisions. The concept of eco-innovation has gained an important role in adapting the tourism product to this new demand. Using a previous database already compiled by the authors, this paper has two aims: to address the effect of implementing environmental measures on labour productivity in the Andalusian hotel industry; and to show how its implementation has evolved during a period of deep economic crisis in all the productive sectors in Spain (2008–2012). For this purpose, the variable ei was defined as indicator by which to measure the eco-innovation and was introduced in a standard Cobb–Douglas production function. The two estimates of the production function for 2008 and 2012 show that the introduction of eco-innovative measures had a positive and significant influence on labour productivity, despite the fact of the economic crisis reduced the productivity growth observed for each additional eco-innovative practice implemented by the hotels from 8.15% in 2008–7.45% in 2012. [ABSTRACT FROM AUTHOR]

Over the last few years, much attention has been paid to the phenomenon of household food waste which largely contributes to the total amount of food waste generated in industrialised countries. The reduction of food waste has been also included within the European strategy of circular economy and ambitious objectives have been assigned to the European member states. Youths proved to be the segment of the population most inclined to waste food and therefore they need to be monitored. This exploratory study, based on a survey involving 380 youths residing in Italy and Spain, aims at investigating the complexities of food waste behaviour within the framework of the Theory of Planned Behaviour. By referring to the PLS-SEM approach, we analyse the validity of the relationships between individual habits, attitudes, addiction to marketing ploys and sales strategies, and attitudes towards food waste. It also aims at verifying the existence of mediator effects in order to better understand these relationships. The construction of the Importance Performance Matrix Analysis enables identification of the dimensions which greatly influence positive behaviour, and whether urgent attention and interventions are required. The results confirm that behavioural models are appropriate for explaining youths' behaviour towards food waste with an important role played by the perceived behavioural control. Situational factors which characterize the moment of purchase should be carefully considered and monitored. This paper concludes that marketing and sale strategies negatively influence the waste behaviour of individuals, emphasizing the important role of retailers in preventing the generation of food waste. [ABSTRACT FROM AUTHOR]

The Spanish residential building stock built between 1940 and 1980 period presents a high energy saving potential as it represents a significant percentage of the total housing stock and it was built without any regulation regarding energy efficiency. Accordingly, the first aim of this paper was to quantify the energy saving potential and the related reduction in CO 2 emissions of the housing stock in those years. The work focuses on the Mediterranean climate of the Comunitat Valenciana Region, therefore the energy efficiency strategies proposed are passive and deal with the envelope of buildings. On the basis of the results obtained, several scenarios with intervention periods of 10, 20 and 30 years were calculated. The conclusion was that with the current rate of annual building renovation, it will be nearly impossible to reach the goals established by the EPBD. Only a deep transformation of the building fabric within this sector could help in achieving them. Finally, it should be noted that the proposed methodology can be applied to other areas with different climates, particularly in Spain. [ABSTRACT FROM AUTHOR]

This paper shows how Balanced Scorecard perspectives can be used to analyze and define the strategic objectives followed by the five large electricity generating and distributing companies in Spain. [ABSTRACT FROM AUTHOR]

Objective: This paper presents an empirical study of a formative mobile-based assessment approach that can be used to provide students with intelligent diagnostic feedback to test its educational effectiveness.Method: An audience response system called SIDRA was integrated with a neural network-based data analysis to generate diagnostic feedback for guided learning. A total of 200 medical students enrolled in a General and Descriptive Anatomy of the Locomotor System course were taught using two different methods. Ninety students in the experimental group used intelligent SIDRA (i-SIDRA), whereas 110 students in the control group received the same training but without employing i-SIDRA.Results: In the students' final exam grades, a statistically significant difference was found between those students that used i-SIDRA as opposed to a traditional teaching methodology (T(162)=2.597; p=0.010). The increase in the number of correct answers during the feedback guided learning process from the first submission to the last submission in four multiple choice question tests was also analyzed. There were average increases of 20.00% (Test1), 11.34% (Test2), 8.88% (Test3) and 13.43% (Test4) in the number of correct answers. In a questionnaire rated on a five-point Likert-type scale, the students expressed satisfaction with the content (M=4.2) and feedback (M=3.5) provided by i-SIDRA and the methodology (M=4.2) used to learn anatomy.Conclusions: The use of audience response systems enriched with feedback such as i-SIDRA improves medical degree students' performance as regards anatomy of the locomotor system. The knowledge state diagrams representing students' behavior allow instructors to study their progress so as to identify what they still need to learn. [ABSTRACT FROM AUTHOR]

The paper shows the results of measurements of carbon dioxide concentrations conducted in the school buildings located in two different climates: Białystok (Poland) and Belmez/Córdoba (Spain). CO 2 concentration in first 45 min met requirements of regulations, but with medium occupation of places in classrooms, then the recommended values were excided. We developed a model for CO 2 level estimation. This model allowed us to simulated the CO 2 concentration for full occupation of classrooms in both countries. In these cases CO 2 concentration would exceed maximum value (1000 ppm) during the first hour. Furthermore required air change rates were calculated: for actual occupation they should be in a range 2.5–5 h −1 to maintain IDA2 and carbon dioxide concentration below 1000 ppm, while in case of full occupation even 6–9 h −1 . Finally, surveys of student satisfaction were performed in situ during the measurements of CO 2 level to obtain the dependence of student comfort perception on this concentration. [ABSTRACT FROM AUTHOR]

The recognition of homosexual rights is a controversial issue in many countries. Spain was the third country in the world (after the Netherlands and Belgium) to introduce a law recognizing homosexual marriage and the adoption of children by homosexual couples. In this paper, we examine for the first time whether schools are more hesitant about giving feedback to homosexual parents during children's pre-registration period in Catalonia (Spain). To do so, we designed a correspondence experiment to be conducted in schools. We created three types of fictitious couples—one heterosexual, one gay, and one lesbian—and sent emails to schools in which the couples’ sexual orientation was explicit. Our results show that gay couples had a significantly lower (22 percentage points) call-back probability than heterosexual couples. No statistically significant differences in call-back probability were found between the lesbian and heterosexual couples. [ABSTRACT FROM AUTHOR]

Opium is a substance extracted from Papaver somniferum L. Opium latex contains morphine, codeine, and thebaine and non-analgesic alkaloids such as papaverine and noscapine. In Spain opium growing is allowed only for scientific or pharmaceutical purposes and harvest is supervised by the Spanish Health Ministry. This work describes a sudden fatality involving opium consumption in a legal poppy field. The toxicological and autopsy findings, previous disease, paraphernalia, and scenario are discussed in order to clarify cause and manner of death. A 32-year-old white caucasian male was found unresponsive in a legal poppy field in the South of Spain. The emergency medical services responded to the scene where he was pronounced dead. The friends explained that the deceased had presented with about 30min of convulsions; in spite of trying to keep his airway tract open they noted that "he stayed airless". According to them the victim suffered from epilepsy. Tools found beside his body consisted of plain wood sticks with a blade razor, a fabric handle, and paper. A comprehensive toxicological screening for abuse and psychoactive drugs was performed in the deceased samples. This included ethanol and volatile analysis by HS-GC-FID in peripheral blood and urine, enzyme immunoassay in urine by CEDIA, and a basic drug screening in all samples (including paraphernalia) by GC-MS using modes full scan for screening/confirmation and selected ion monitoring for quantitation. The peripheral blood, urine, vitreous, and gastric content contained the following concentrations of opiates expressed in mg/L (gastric content additionally also expressed in mg total): 0.10, 7.12, 0.23, and 14.80 (2.81mg total) of thebaine, 0.13, 4.50, 0.13, and 6.60 (1.25mg total) of morphine (free), 0.48, 0.88, 0.17, and 1.50 (0.28mg total) of codeine. These tree opiates were also detected in the tools (paraphernalia) used by the deceased for opium consumption. Other toxicological findings were metabolites of cocaine and cannabis. Apparently the victim stole poppy capsules and ingested an unknown quantity of the latex with the goal to obtain euphoric effects. The cause of death was considered poly-drug toxicity with a preponderant role of thebaine and morphine. In addition, the epileptic condition of the deceased could have played a role. As far as we know, there are no previous reports of fatalities occurring in legal poppy fields. [ABSTRACT FROM AUTHOR]

This paper presents an overview of a set of amphetamines and cannabinoids tests performed on head hair samples from the Medico-Legal sector at the Madrid Department of the Spanish National Institute of Toxicology and Forensic Sciences during the years 2013 and 2014. The hair samples were tested for five stimulant phenylalkylamine derivatives -amphetamine (AP), methamphetamine (MA), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxy-amphetamine (MDA), and 3,4-methylenedioxy-N-ethylamphetamine (MDEA)- and/or two cannabinoids-Δ(9)-tetrahydrocannabinol (THC) and cannabinol (CBN)- by gas chromatography equipped with mass spectrometry detection in selected-ion monitoring mode, applying a method accredited to ISO/IEC 17025 standards. The test results were interpreted according to the confirmation cut-offs proposed by the Society of Hair Testing (SoHT) to identify chronic drug use. The ratios of positive results were studied in relation to gender, age, hair colour, dyeing and length of the tested samples to assess the independence from these variables or the association with them. Low, medium and high ranges of concentration were also estimated for each drug. 21.94% of the 2954 hair samples tested for phenylalkylamine derivatives were positive for one or more substances. 16.38% of the samples were positive for AP, 12.09% for MDMA and only 0.44% for MA. 6.60% of the tested samples were positive for AP/MDMA combination. A total of 3178 samples were tested for cannabinoids, resulting in 53.40% positive for THC and CBN. Simultaneous tests for phenylalkylamine derivatives and cannabinoids were performed in 2931 of the samples; 14.94% of them were positive for THC, CBN, and one or more amphetamines. According to the results from the statistical analysis, the use of THC and MDMA vary with age and gender among the Medico-Legal sector in an extended area of Spain, while the use of AP appears to be independent of these variables. On the other hand, the results of THC in hair could be influenced by the length of the tested segment; therefore, a consensus regarding the hair length between 3.0 and 5.5cm for THC testing should be reached. [ABSTRACT FROM AUTHOR]

This paper is to select the best locations to build solar photovoltaic farms (large grid-connected photovoltaic systems which have more than 100 kW p of installed capacity), with the coast of Murcia in the southeast of Spain being used as an example. In order to solve the problem, the suitable locations to implant such facilities will be identified by a Geographical Information System (GIS). To obtain the weights of the criteria which influence the proposed problem, the Analytic Hierarchy Process (AHP) will be employed. Then, the suitable locations will be evaluated and classified using two different multi-criteria decision methods, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) and ELimination and Choice Expressing Reality (ELECTRE), in this case the version TRI. We are thus also able to establish a comparison between the two methods. This comparison demonstrates how although the results do not completely coincide, some similarity can be seen between the two methods. [ABSTRACT FROM AUTHOR]

This paper assesses the feasibility and robustness of an index-based insurance scheme against hydrological droughts under climate change. To this end, we develop a grand ensemble that samples both modeling and scenario uncertainty in the estimation of the insurance risk premium, so to reveal potential unfavorable surprises and minimize regret in the design of the proposed insurance scheme. The grand ensemble combines four microeconomic models and seven GAMLSS models, which are run for three alternative climate change scenarios: stationary climate/no climate change, RCP 2.6, and RCP 8.5. Methods are illustrated with an application to the Cega River Sub-basin (CRS) in central Spain. Results indicate that for a conventional deductible of 30%, the proposed index-based insurance scheme would be actuarially feasible and affordable under all models for the stationary climate scenario (i.e., robust). For climate change scenarios RCP 2.6 and 8.5 and a 30% deductible, the suggested index-based insurance would be actuarially feasible under most models, albeit some outliers point towards potential unfavorable surprises. Lower deductibles decrease feasibility, particularly for deductibles <10%. • For a deductible of 30% and stationary climate, the proposed index-based insurance is actuarially feasible under all models. • Under climate change (RCPs 2.6, 8.5), the insurance is feasible for all deductibles and the median model (except PMAUP WGP). [ABSTRACT FROM AUTHOR]

Many types of research have been carried out with the aim of combating the COVID-19 pandemic since the first outbreak was detected in Wuhan, China. Anticipating the evolution of an outbreak helps to devise suitable economic, social and health care strategies to mitigate the effects of the virus. For this reason, predicting the SARS-CoV-2 transmission rate has become one of the most important and challenging problems of the past months. In this paper, we apply a two-stage mid and long-term forecasting framework to the epidemic situation in eight districts of Andalusia, Spain. First, an analytical procedure is performed iteratively to fit polynomial curves to the cumulative curve of contagions. Then, the extracted information is used for estimating the parameters and structure of an evolutionary artificial neural network with hybrid architectures (i.e., with different basis functions for the hidden nodes) while considering single and simultaneous time horizon estimations. The results obtained demonstrate that including polynomial information extracted during the training stage significantly improves the mid- and long-term estimations in seven of the eight considered districts. The increase in average accuracy (for the joint mid- and long-term horizon forecasts) is 37.61% and 35.53% when considering the single and simultaneous forecast approaches, respectively. • Estimated polynomial model coefficients serve as COVID19 contagion rate descriptors. • EANNs are used to build valid predictors for different pandemic stages. • Considering curve polynomial descriptors significantly improve the model performances. • Simultaneous Multi-Task EANN forecast perform better in Málaga with simpler models. [ABSTRACT FROM AUTHOR]

The evaluation and comparative analyses of energy conversion technologies are carried out with well-established concepts, like the concept of efficiency. Today, however, new technologies based on renewable energy sources challenge conventional approaches. Accounting for fuel diversity and other inequalities can ensure that comparative analyses result in trustworthy results. This paper aims to address this issue by updating conventional efficiency for more accurate comparative evaluations of fossil fuel energy systems. Specifically, the concept of total efficiency is introduced to account for extraction, processing and transportation of fossil fuels, aspects that are not currently considered in the conventional definition of efficiency. The total efficiency is determined by studying the environmental impacts of these processes and quantifying their energy requirements in terms of additional fossil fuel use. Two case studies in Spain are presented to demonstrate the impact of using the developed method on efficiency estimates. The total efficiency is found to be lower than the convectional efficiency by 21–25% to up to 41%, in the most unfavorable cases. This shows the significant impact of the preparation steps of fossil fuels and represents a fairer comparison between fossil fuels and renewable conversion processes. • Introducing total efficiency for more accurate comparative evaluations of energy systems. • Total efficiency accounts for extraction, processing, and transportation of fossil fuels. • The developed method links environmental impacts to additional fuel input. • Fuel processing decreases the efficiencies of fossil power plants significantly. • Updated tools, like total efficiency, are necessary to achieve future energy sustainability. [ABSTRACT FROM AUTHOR]

The United Nations monetary System of Environmental-Economic Accounting—Ecosystem Accounting (SEEA EA) does not recommend the measurement of the environmental incomes of single products from an ecosystem accounting area. The objective of this paper is to uncover the accounting period environmental income given by the environmental operating return embedded in single biological-based products consumed, plus their environmental asset gain, by applying the authors' refined extended monetary accounts of the SEEA EA. The standard System of National Accounts (SNA) and the refined SEEA EA frameworks are applied to 12 protected publicly-owned mixed-pine-forest-farm case studies in Andalusia, Spain. The comparison of results shows that the net value added for the pine-forest farms estimated under the refined SEEA EA is four times greater than that of the standard SNA, indicating the importance of uncovering the exchange values provided by the operating returns on manufactured capitals and environmental assets of products consumed without market prices. After omitting the carbon ecosystem service to avoid double counting, the ecosystem services and changes in the environmental assets made up 68% and 32%, respectively, of the aggregate environmental income from the 11 environmental assets valued in the pine-forest-farm case studies in 2010. • The refined SEEA EA extends the SNA by incorporating the environmental income. • The refined SEEA EA net value added is 4.4 times higher than under the SNA. • Public activities account for 89% of net value added under the refined SEEA EA. • Ecosystem services account for 95% of conifer farm environmental income. • Farmer provisioning services account for 2% of conifer farm ecosystem services. [ABSTRACT FROM AUTHOR]

Livestock farming has been traditionally assessed by its economic figures, whereas the impact caused by their production models on the environment and on society have been largely disregarded. This paper analyses various organic cattle farming systems from the point of view of their technical-economic management, but also on the environmental impact caused by their greenhouse gas (GHG) emissions. Within this context, 34 organic meat cattle dehesa farms located in the southwest of Spain were studied. On the one hand, a principal component analysis devised four factors that explained the technical-economic management model of these farms in terms of their level of dependence on subsidies, production intensification, feeding practices and productivity. The farms were then divided into three clusters whose main differences came from the size of the farms, the intensification level and the joint rearing of cattle with other livestock species. On the other hand, GHG emissions and carbon sequestration levels for each of these clusters were calculated using the life cycle assessment methodology. The average GHG net emissions from the farms were 461.98 kg of CO 2 eq per ha (or 8.86 kg of CO 2 eq per kg of live weight of sold animal), with the largest and more extensive farms reporting 262.05 kg of CO 2 eq per ha (or 6.02 kg of CO 2 eq per kg of live weight of sold animal) and the smallest and more intensive farms resulting in as much as 697.49 kg of CO 2 eq per ha (or 11.18 kg of CO 2 eq per kg of live weight of sold animal). One of the most significant aspects of the study was the carbon sequestration capacity of dehesa extensive farms, which allowed these livestock systems to be in line with the preservation of the natural resources, animal welfare and the provision of ecosystem services. [Display omitted] • Sustainability of organic livestock farms is at risk due to low profitability. • C storage is a key ecosystem service of livestock systems to fight climate change. • Carbon sequestration in LCA reduces net emissions on extensive organic beef farms. • Livestock management on extensive organic farms improves climate change adaptation. [ABSTRACT FROM AUTHOR]

• A DCE is conducted to assess households' willingness to insulate their homes. • Determinants for the adoption of façade thermal insulation are identified. • The investment cost required in the existing building stock is below the obtained WTP. • The required subsidy level is lower than the grants set by existing aid programs. • Increased tax rebate has greater incentive effect than soft financing. This paper assesses Spanish households' willingness to thermally insulate their homes and the drivers that influence such a decision-making process. Stated preference data were collected through a discrete choice experiment (DCE). The final sample of 191 respondents and 1,145 observations was analysed by the use of a mixed logit model, weighing the factors that encourage homeowners to carry out façade energy renovations or not. The model enables the quantitative estimation of renovation adoption rates depending on the households' characteristics and public support instruments in place. The results show that homeowners are extremely interested in increasing the thermal insulation of their homes. The actual investment cost required in the existing building stock is lower than the obtained willingness-to-pay. Furthermore, it was found a relevant effect of a variety of household features on renovation choice (income, age, heating system, etc.), which should be contemplated in the energy efficiency policy design. Additionally, a case analysis is performed which comprises 3 household categories. The results reveal that the required subsidy level is different in each case, sometimes even unnecessary, although all of them lower than the grants set by existing aid programs. Thus, to reduce the free-riding effect, a closer perspective would enable targeted support mechanisms towards each household category. Moreover, the policy performance can be improved by combining subsidies with other measures such as low-interest loans or increased tax rebates, which could contribute to improving the cost effectiveness of the public expense associated with direct grants. Overall, an increased tax rebate is preferred to soft financing, although the influence of the latter increases in low-income households. [ABSTRACT FROM AUTHOR]

• Cost-effective and sustainable energy systems retrofit for buildings. • 2nd life Li-Ion batteries in polygeneration systems for buildings. • To cut off the natural gas consumption at affordable cost. The building sector represents around one-third of the energy related to the EU CO 2 eq emissions, which makes it a crucial sector for achieving the EU's energy and environmental goals. Thus, the EU has established a legislative framework to foster, among others, the modernisation of the existing building stock through a better energy system integration. In this sense, bearing in mind the needs of energy system retrofit of the public buildings in Spain, this paper carried out a thorough analysis of different trade-off solutions obtained from the multiobjective optimization of a polygeneration system for the TR5 building of the Polytechnic University of Catalunya. The results highlight the selection of PV panels, cogeneration modules and 2 nd life Li-Ion batteries, among others, to achieve cost-effective and sustainable energy systems. By covering the available area, 2000 m 2 , the PV panels attend about 23% of the electricity required for the building. On the other hand, considering the current geopolitical tensions, it presents a potential configuration that allows to cut off the natural gas consumption reducing about 6% the current cost. The study was carried out by using a Mixed Integer Linear Programming model maximizing the Net Present Value of the project considering the environmental impact. [ABSTRACT FROM AUTHOR]

Circular Economy (CE) implementation is considered an instrumental strategy to help reaching the world's resource, energy, and climate mitigation targets, including the Sustainable Development Goals (SDGs) 2030. However, major barriers must be overcome to facilitate CE implementation in industry such as cultural, market, regulatory and technological considerantions (Kirchherr et al., 2018). Improving management systems within industrial companies is crucial when implementing effective CE solutions in compliance with existing industrial standards such as quality and environmental management systems. However, it is not yet common practice yet due to the lack of standardized, suitable, and easy-to-use supporting analytical tools. This paper attempts to fill this gap by presenting Industrial Circular Economy Questionnaire (ICEQ) , a self-diagnosis questionnaire built upon the revision of industrial harmonized standards and, academic literature on business-level CE assessment tools. ICEQ , compiling a set of 165 questions for company self-CE assessment, was applied to 30 industrial companies belonging to 17 economic sectors (automotive, machining and metalworking transformation, waste management, machine tool, etc.) in the Basque Autonomous Community (BAC) in Spain. The automotive sector stands out with 70% of circularity while Machining and metalworking transformation only has 34%, showing that the automotive sector is more conscious of CE since they must comply with End-of-Life Vehicles (EoLV) legislation. [ABSTRACT FROM AUTHOR]

One of the main lines of research in the discipline of mobility mining is the development of predictors able to anticipate human travel behaviour in great detail. However, access to the high-resolution spatio-temporal data on which most existing solutions are based is rather limited due to multiple factors, e.g. costly access to third-party data. These restrictions give rise to a problem of developing predictors of human mobility in most setting, since the amount of data available to train these prediction models is insufficient. This paper explores the feasibility of using a public data source such as Twitter to predict the number of trips at the nationwide level. The proposed approach combines a large set of geotagged Twitter posts with an open data source published by the Spanish government on traveller mobility based on mobile phone location. Both datasets are used as input to Machine Learning models to validate the use of Twitter data for improving the prediction of these models. The results show that Twitter data have considerable value as a predictor of large-scale human mobility, especially for Long Short-Term Memory (LSTM) models. As a result, the relevance of this work resides in demonstrating that the use of Twitter could be considered as an alternative to substantially enhance the prediction of mobility within a country when it is combined with other open data sources. • A novel approach for nation-wide human mobility forecasting is proposed. • The predictor combines mobile-phone and Twitter location data as input variables. • LSTM and VAR models have been tested as candidates to develop the mechanism. • Twitter has proved to be a suitable exogenous input. • The system has been tested in Spain achieving a 6.85 CRMSE for 7-day prediction. [Display omitted] [ABSTRACT FROM AUTHOR]

Abstract: This paper presents a technical, historical, and aesthetic study of the Maria Pia Bridge over the Douro River in Porto, Portugal which was designed and built by G. Eiffel and Cie. between 1875 and 1877. Through these analyses, this paper demonstrates the significance of this bridge due to its (1) economy as shown through the design competition, (2) efficiency and safety under self-weight, live, and wind loads as revealed by finite element analyses, and (3) elegance of form which is evaluated through the aesthetic motivation of the designer, international acclaim, and an on-site visual analysis. The primary purpose of the paper is not to suggest that designers today emulate the Maria Pia form, but to shed light on the thought process of the engineers at G. Eiffel and Cie. The conceptual design was imagined through considering the site constraints, the forces acting on the structure, and the erection procedure, ultimately leading to an economical project that won the design competition. This design-build approach can be used more often in 21st century design. [Copyright &y& Elsevier]

Abstract: This paper presents the potential manufacture, and the engineering properties, of producing an economical, ecological and sustainable building material using a Spanish clay soil. Cylindrical clay soil test specimens incorporating three types of commercials stabilizer additives i) Portland cement (PC), ii) Natural Hydraulic Lime (NHL-5) and iii) Hydrated Lime (CL-90-S) were used, on similar mix compositions for brick production. The investigations were carried out using a clay soil supplied by a rural bricks manufacturer. The laboratory results demonstrated that compaction effort, compressive strength, moisture content, rate of water absorption, density and durability (repeated 48-hours of freezing/thawing cycles) were all within acceptable engineering standards typical for clay masonry bricks. This paper has demonstrated that with the mix formulations tested, unfired masonry bricks can be manufactured at the appropriate optimal compaction and optimum additive content depending on the desired engineering properties and any other desirable brick characteristics. [Copyright &y& Elsevier]

Abstract: The aim of this paper is to analyze the evolution of the implementation and integration of standardized Management Systems (MSs) such as ISO 9001 and ISO 14001. Specifically, we study the implementation of different standards during a four-year period (2006–2010) and we examine the level of integration of different MS elements such as the resources, documentation, goals and procedures during this period. Additionally, the paper aims to evaluate the impact of integration on companies over time, namely the difficulties experienced by firms during the integration of MSs in organizations with more than one MS. In order to accomplish these objectives, the first dynamic study on the integration of MSs has been undertaken. In order to compare firms that integrate their MSs in two different moments in time, two empirical studies were conducted, one in 2006 and one in 2010. These studies used a survey directed to firms with more than one MS in Catalonia (Spain). This paper contributes to the understanding of how firms that have an Integrated Management System (IMS) integrate their standardized MSs and how they perceive the challenges related to managing the IMS over time. It also demonstrates that firms integrate their MSs rather than keep them separated, therefore showing a tendency toward integration over time. [Copyright &y& Elsevier]

Abstract: This paper presents an evolutionary algorithm for wind speed reconstruction from synoptic pressure patterns. The algorithm operates in a search space formed by grids of pressure measures, and must classify the different situations into classes, in such a way that a measure of wind speed in a given point is minimized among patterns assigned to the same class. Then, each class is assigned a mean wind speed and direction, so the wind speed reconstruction is possible for a new grid of synoptic pressures. In this paper we present the problem model and the specific description of the evolutionary algorithm proposed to solve the problem. We also show the good performance of the proposed method in the reconstruction of the average wind speed in six wind towers in Spain. The proposed method is applicable to wind speed reconstruction or reconstruction of wind missing data of wind series, specially when there is no other variable or related measure available. [Copyright &y& Elsevier]

Abstract: Industrial parks play a significant role in the production and use of goods and services. However, this also means that the environmental problems of each company are concentrated in a relatively small area. One of these problems is solid waste disposal, which has become a critical issue because of its negative impacts as well as the resources consumed. Integrated solid waste management integrates cleaner and more sustainable production strategies by reducing resource consumption and applying mechanisms found in natural ecosystems to industrial systems. Nevertheless, one of the necessary conditions for the design of such a system is a preliminary study of waste generation management in the area. The study presented in this paper characterizes industrial waste production and management in the metropolitan area of Granada (Spain), and analyzes its strengths, weaknesses, opportunities and threats. A similar typology of industrial activities, mainly in the distribution and transportation sector, as well as the proximity of various industrial parks could facilitate their partnership in environmental management. The results obtained in our study point to significant weaknesses in the system, such as the lack of effective waste management tools and training for waste management personnel. Other weaknesses were, the low percentage of selective waste collection and the existence of unauthorized collectors. The paper concludes with specific proposals for waste collection. These recommendations include the creation of the following: (i) a community responsible for waste management; (ii) recycling points in industrial parks; (iii) energy recovery from the waste; (iv) a market to sell, buy, and/or exchange waste; (v) one authorized set of waste management agents that would provide the advantages of an economy of scale. [Copyright &y& Elsevier]

Abstract: In this paper the inventory of 90Sr in 34 points distributed along the Spanish peninsular territory is presented. Obtained values range between 173 Bq/m2 and 2047 Bq/m2. From these data set and those 137Cs data obtained in a previous work the 137Cs/90Sr activity ratio has been established, laying this value between 0.9 and 3.6. Also the migration depth of both radionuclides has been analysed obtaining for 137Cs an average value 57% lower than that obtained for 90Sr. Additionally, this paper presents the results obtained in 11 sampling points in which the activity vertical profile has been measured. These profiles have been analysed to state the behaviour of strontium in soils and after, by using a convective–diffusive model, the parameters of the model which governs the vertical migration of 90Sr in the soil, v (apparent convection velocity) and D (apparent diffusion coefficient) have been evaluated. Mean values obtained are 0.20 cm/year and 3.67 cm2/year, respectively. [Copyright &y& Elsevier]

In the past few decades, economists have defended the use of market-based instruments (MBI) in environmental and climate policy. There have been many papers which have compared the costs of attaining environmental objectives with MBIs and with command and control instruments. However very few have compared different MBIs in examining these costs. This paper seeks to analyse various MBIs for CO2 mitigation from the viewpoint of cost-effectiveness, using an AGE (applied general equilibrium) model for the case of Spain. A distinction is drawn between (1) quantity instruments, which represent different extents of a market for emission permits; and (2) price instruments, which represent different types of tax. Each instrument can affect different segments of the emission sources and therefore can have very different effects on the economy as a whole. We show how MBI can help to minimise mitigation costs, but also how taxes and tradable emission permits that are limited or constrained by many exemptions and distortions can raise costs considerably. [Copyright &y& Elsevier]

Abstract: Background: Numerous studies analyzed concentrations of persistent organic pollutants (POPs) in human samples, and in many types of foods; however, food consumption is less commonly included in studies on the determinants of POP concentrations in humans, and these approaches are rarely integrated with surveys of food intake to estimate the amount and safety of human POP intake from food. Objective: To analyze the main characteristics and findings of all studies conducted in Spain that quantitatively assessed the influence of diet on human concentrations of POPs. Methods: Studies published until December 2010 (with no other time restrictions) were identified through Medline/PubMed, ISI-Thomson, ScienceDirect, and SciELO databases. Results: We identified 25 papers, from 19 different studies. Twelve papers were published in 2009–2010. All studies but one were based on subgroups not representative of the general population, and over half were limited to women. Serum was the most used biological matrix, while p,p′-DDE, HCB and PCBs were the most frequently analyzed compounds. Food intakes were measured with heterogeneous food frequency questionnaires. The most consistent association was between fish consumption and PCBs and HCB, followed by dairy products and PCBs. A few studies observed a relationship between meat and some POPs, whilst intake of vegetables, fruits and cereals was rarely related to POP levels. Only 3 studies did not find any relationship between dietary habits and POP concentrations. Conclusions: In spite of methodological heterogeneity, the studies were able to quantify to what extent consumption of foods from animal origin (fish, milk, dairy products and meat) is related to higher body concentrations of POPs. As in a few other countries, in Spain food consumption is increasingly analyzed as a major determinant of human POP intake. [Copyright &y& Elsevier]

Abstract: This paper analyzes the mass size distribution of some inorganic species present in the atmospheric aerosol from a field campaign carried out in Madrid throughout a complete year (February 2007–February 2008). Samplings were performed by means of a micro-orifice uniform deposit impactor (MOUDI). Ambient air was sampled during consecutive nocturnal and diurnal periods, and diurnal/nocturnal behaviors were compared for the twenty night-day sampling pairs that were gathered. Annual and seasonal averages were obtained, and some case studies under specific atmospheric conditions are discussed in the paper. Results have shown that the sulfate and ammonium mass was concentrated in the accumulation mode, between 0.18 and 0.56μm, so that gas-phase and condensation processes for secondary aerosol formation prevailed during the sampling periods in this area. An exception to this behavior was found during a fog event when distributions for these two species were centered in the 0.56–1 and 1–1.8μm size stages, corresponding to the droplet mode. In most of the samples, the ammonium mass measured in these size ranges was enough or almost enough to neutralize inorganic acidity by formation of ammonium sulfate and nitrate. However, a significant sulfate mass not neutralized by ammonium was found in the impactor backup quartz filter (aerodynamic diameter<0.056μm). The concentration of this sulfate and its contribution to the ultrafine fraction mass was higher under good dispersive conditions, prevailing in summer, when particle growth processes are not so favored due to the higher atmospheric dilution factors. The origin of this ultrafine sulfate has been attributed to direct emissions from traffic, associated to the nucleation mode. Regarding the nitrate concentration, it was found higher in the coarse mode than in the accumulation mode on an annual basis. The highest concentrations were measured in winter episodic situations. The marked seasonal variability shown in the accumulation mode by this species is related to the volatility of ammonium nitrate. Among all the studied ions, nitrate also presented the highest differences between the diurnal and nocturnal concentrations in all size ranges. This is probably related to the short time scale required for its formation from gaseous precursors. [Copyright &y& Elsevier]

Abstract: Lead (Pb) is a metal that is non-essential to any metabolic process and, moreover, highly deleterious to life. In microbial mats – benthic stratified ecosystems – located in coastal areas, phototrophic microorganisms (algae and oxygenic phototrophic bacteria) are the primary producers and they are exposed to pollution by metals. In this paper we describe the search for bioindicators among phototrophic populations of Ebro delta microbial mats, using high-resolution microscopic techniques that we have optimized in previous studies. Confocal laser scanning microscopy coupled to a spectrofluorometric detector (CLSM-λscan) to determine in vivo sensitivity of different cyanobacteria to lead, and scanning electron microscopy (SEM) and transmission electron microscopy (TEM), both coupled to energy dispersive X-ray microanalysis (EDX), to determine the extra- and intracellular sequestration of this metal in cells, were the techniques used for this purpose. Oscillatoria sp. PCC 7515, Chroococcus sp. PCC 9106 and Spirulina sp. PCC 6313 tested in this paper could be considered bioindicators for lead pollution, because all of these microorganisms are indigenous, have high tolerance to high concentrations of lead and are able to accumulate this metal externally in extracellular polymeric substances (EPS) and intracellularly in polyphosphate (PP) inclusions. Experiments made with microcosms demonstrated that Phormidium-like and Lyngbya-like organisms selected themselves at the highest concentrations of lead assayed. In the present study it is shown that all cyanobacteria studied (both in culture and in microcosms) present PP inclusions in their cytoplasm and that these increase in number in lead polluted cultures and microcosms. We believe that the application of these microscopic techniques open up broad prospects for future studies of metal ecotoxicity. [Copyright &y& Elsevier]

Abstract: The aim of this paper is to empirically assess the determinants of environmental technology investments in the Spanish industrial sectors with the help of panel data econometric techniques. The paper confirms the relevance of the stringency of environmental regulation to explain overall investment patterns in environmental technologies. These investments are also positively related to human and physical capital intensity and R&D intensity, and negatively related to the export intensity of sectors. Furthermore, the study shows that the determinants for investments are likely to differ between environmental technology types (i.e., end-of-pipe versus cleaner technologies). [Copyright &y& Elsevier]

Abstract: During recent decades, the impact of industrial organisations on the environment has become clearly evident. It has also become more difficult to hide and more expensive. Globally, this has caused many enterprises to put all their efforts into seeking management instruments that allow them to reduce their negative impact on the environment as well as improving their economic efficiency. This environmental interest is either voluntary or forced by customers or by legal pressure. Environmental Management Systems (EMSs) are among the many tools that have appeared to fulfil that goal and that have drawn international researchers’ attention. The most popular system and the one most often used is the ISO 14001 standard. This paper examines empirically the influence that this certification exerts on the company’s pollutant emission policy. The analysis was carried out in four regions of Spain: Asturias, Cantabria, Galicia and Castilla-León and includes 126 industrial organisations. The goal of this paper is to investigate the behaviour of the companies according to their emissions policies once they have achieved the ISO 14001 certification. In the paper the Toxics Release Index of 56 certified companies is compared with the Index of 70 non-certified companies. Through a statistical analysis based on the Student’s t-test and the Mann–Whitney U test, it was concluded that ISO 14001 does not represent an environmental proactivity signal clearly enough to result in a reduction of the company’s environmental polluting index. [Copyright &y& Elsevier]

Abstract: In recent years, fuzzy models have been acknowledged as a suitable approach for species distribution modelling due to their transparency and their ability to incorporate the ecological gradient theory. Specifically, the overlapping class boundaries of a fuzzy model are similar to the transitions between different environmental conditions. However, the need for ecological expert knowledge is an important constraint when applying fuzzy species distribution models. Moreover, the consistency of the ecological preferences of some fish species across different rivers has been widely contested. Recent research has shown that data-driven fuzzy models may solve this ‘knowledge acquisition bottleneck’ and this paper is a further contribution. The aim was to analyse the brown trout (Salmo trutta fario L.) habitat preferences based on a data-driven fuzzy modelling technique and to compare the resulting fuzzy models with a commonly applied modelling technique, Random Forests. A heuristic nearest ascent hill-climbing algorithm for fuzzy rule optimisation and Random Forests were applied to analyse the ecological preferences of brown trout in 93 mesohabitats. No significant differences in model performance were observed between the optimal fuzzy model and the Random Forests model and both approaches selected river width, the cover index and flow velocity as the most important variables describing brown trout habitat suitability. Further, the fuzzy model combined ecological relevance with reasonable interpretability, whereas the transparency of the Random Forests model was limited. This paper shows that fuzzy models may be a valid approach for species distribution modelling and that their performance is comparable to that of state-of-the-art modelling techniques like Random Forests. Fuzzy models could therefore be a valuable decision support tool for river managers and enhance communication between stakeholders. [Copyright &y& Elsevier]

Abstract: This paper contains a summary and evaluation of an experimental research project carried out at the ICITECH laboratories, Valencia, Spain. The project consisted of the construction of a full-scale building that included a process of shoring, clearing and striking (SCS). The experimental model was used as the basis for the development of a FE model, including an evolving calculation, with the objective of simulating the construction process used, as well as studying the evolution of concrete properties during the test. The FE model was verified with the results obtained from the experimental model. Two further FE models were then developed from the original model and used to simulate the construction of the same building using two different construction processes: one involving shoring and striking (SS) and the other shoring, re-shoring and striking (SRS). Finally, the SCS was compared to the SS and SRS processes, respectively, and an analysis was made of the advantages and disadvantages of each one. The paper breaks new ground in that for the first time ever a comparative study is made of the three most frequently used shoring techniques. [Copyright &y& Elsevier]

Abstract: Object-Oriented Bayesian Networks (OOBNs) have been used increasingly over the past few decades in fields as diverse as medicine, transport and aeronautics. In this paper, OOBNs are applied to the domain of integrated water management and used as a Decision Support System (DSS). This pioneering study, set in the Altiplano region of Murcia in Southern Spain, describes a method for the integrated analysis of a complex water system supplied by groundwater from four aquifers. This method is based on the development of a multivariable integrated technique based on Bayes'' theorem. After identifying all relevant factors related to water management in the area these were then translated to variables within a Bayesian Network (BN) and the relationships between them investigated. Each network represented one of the four aquifer units. These individual BNs were then linked to form an OOBN which was used to represent the complex real-world situation. In this way a DSS to simulate the entire water system was constructed using a group of conventional Bns, linked to produce an OOBN. The main stakeholders of the region contributed to network design and construction throughout the entire process. The paper shows how this type of DSS can be used to evaluate the impacts of a range of management strategies that are available to local planners. [Copyright &y& Elsevier]

Forest fires play a critical role in landscape transformation, vegetation succession, soil degradation and air quality. Improvements in fire risk estimation are vital to reduce the negative impacts of fire, either by lessen burn severity or intensity through fuel management, or by aiding the natural vegetation recovery using post-fire treatments. This paper presents the methods to generate the input variables and the risk integration developed within the Firemap project (funded under the Spanish Ministry of Science and Technology) to map wildland fire risk for several regions of Spain. After defining the conceptual scheme for fire risk assessment, the paper describes the methods used to generate the risk parameters, and presents proposals for their integration into synthetic risk indices. The generation of the input variables was based on an extensive use of geographic information system and remote sensing technologies, since the project was intended to provide a spatial and temporal assessment of risk conditions. All variables were mapped at 1km2 spatial resolution, and were integrated into a web-mapping service system. This service was active in the summer of 2007 for semi-operational testing of end-users. The paper also presents the first validation results of the danger index, by comparing temporal trends of different danger components and fire occurrence in the different study regions. [Copyright &y& Elsevier]

Abstract: This paper proposes a new method for addressing the short-term optimal operation of a generation company, fully adapted to represent the characteristics of the new competitive markets. We propose an efficient and highly accurate novel method for next-day price forecasting. We model the functional time series with a linear autoregressive functional model which formulates the relationships between each daily function of prices and the functions of previous days. For the optimization problem (formulated within the framework of nonsmooth analysis using Pontryagin’s Maximum Principle), we propose a new method that uses diverse mathematical techniques (the Shooting Method, Euler’s Method, the Cyclic Coordinate Descent Method). These techniques are well known for the case of functions, but are adapted here to the case of functionals and are efficiently combined to provide a novel contribution. Finally, the paper presents the results of applying our method to a price-taker company in the Spanish electricity market. [Copyright &y& Elsevier]

Abstract: Ground Penetrating Radar (GPR) is a widespread technique to locate and characterise karst hazards (cavities and paleocollapses). In this paper, we show that the internal structure of sediments obtained from GPR surveys can also be used as an indicator of active karst processes. A classification of karst hazard problems by means of GPR in the GPR-doline triangle is proposed, with three end-members: cavities, evidences of subsidence and paleocollapses. These end members show particular signatures in the GPR-profiles. The field examples shown in this paper indicate that GPR survey is a geophysical technique that offers a very high resolution and provides structural and sedimentological information of the subsoil. The use of grid maps, elaborated from GPR data, is an efficient way to determine anomalous sectors (lateral changes of electromagnetic properties, different reflectivity and qualitative penetration depth variations or velocity wave propagation changes). Their relationships with the structural features obtained from GPR-profiles (on-lap geometries, zones with depressed reflectors, folded reflectors or laterally abrupt structural limits) can be used as indicators of karstic processes. [Copyright &y& Elsevier]

Abstract: This is the first paper to report a detailed comparison between ground based measurements of cloud enhanced ultraviolet (UV) radiation at sites located in both hemispheres. The measurements were undertaken at a Northern Hemisphere site (at the campus of the University of Girona in Spain) and a Southern Hemisphere site (campus of the University of Southern Queensland, Toowoomba, Australia). These sites were chosen as they have both simultaneous sky camera and solar radiation (including UV) measurement campaigns operating for at least 5 years over the same time period. Although hemispheric comparisons of UV radiation are not new, this paper focuses on a study of enhancements, including a comparison of the frequency of occurrence and associated cloud types, at the locations with differing climatology. It is found that although there are commonalities between the sites, such as the correlation of the frequency of enhancements with larger solar zenith angle (SZA) both at Girona and Toowoomba, there are differences too, e.g. the frequency of occurrence of the enhancements, and the type of clouds that produce most enhancements (cirrus at Girona, cumulus at Toowoomba). It is suggested that this is due to the differences in latitude coupled with a large amount of Cirriform cloud, especially corresponding to large SZA, at Girona. Possible explanations for this major difference were examined, with the most likely hypothesis relating to multiple scattering due to Cirriform cloud and the subsequent effect on UV radiation on a horizontal surface at large SZA. [Copyright &y& Elsevier]

Abstract: This paper contemplates the efforts and developments in the field of sounding rockets carried out in Spain from the decade of the 1960s to the early 1990s when the use of such vehicles was abandoned worldwide. The initial sounding rocket planning within the National Space Research Programs around 1964 (when Spain joined ESRO) is presented. The status of the rocket technology in Spain in 1964 is analysed, reviewing the main technology gaps and the way they were filled to make the planned developments possible. Three Spanish sounding rockets are presented: the INTA-255 (150km apogee with formative objectives, first launched in 1969), the INTA-300 (300km apogee with high characteristics and commercial capabilities, first launched in 1974) and the INTA-100 (115km apogee being finally a totally national product, first launched in 1980). Some guided rocket vehicle projects which were based, on some way, on the previous sounding rockets activities are also mentioned in this paper. [Copyright &y& Elsevier]

Abstract: Background: It is generally acknowledged that Denmark is one, if not the, leading country in terms of the use of information technology by its primary care physicians. Other countries, notably excluding the United States and Canada, are also advanced in terms of electronic medical records in general practitioner offices and clinics. Purpose: This paper compares the status of primary care physician office computing in Andalucía to that of Denmark by contrasting the functionality of electronic medical records (EMRs) and the ability to electronically communicate clinical information in both jurisdictions. Methods: A novel scoring system has been developed based on data gathered from databases held by the respective jurisdictional programs, and interviews with individuals involved in the deployment of the systems. The scoring methodology was applied for the first time in a comparison of the degree of automation in primary care physician offices in Denmark and the province of Alberta in Canada. It was also used to compare Denmark and New Zealand. This paper is the third offering of this method of scoring the adoption of electronic medical records in primary care office settings which hopefully may be applicable to other health jurisdictions at national, state, or provincial levels. Results: Although similar in many respects, there are significant differences between these two relatively autonomous health systems which have led to the rates of uptake of physician office computing. Particularly notable is the reality that the Danish primary care physicians have individual “Electronic Medical Records” while in Andalucía, the primary care physicians share a common record which when secondary care is fully implemented will indeed be an “Electronic Health Record”. Conclusion: It is clear that the diffusion of technology, within the primary care physician sector of the health care market, is subject to historical, financial, legal, cultural, and social factors. This tale of two places illustrates the issues, and different ways that they have been addressed. [Copyright &y& Elsevier]

This paper presents the results of a participatory multi-criteria evaluation of urban water supply alternatives in Costa del Sol Occidental in Málaga (Spain). Multi-criteria and social research techniques were combined, relying on social actors' involvement throughout the research work. The paper documents that participatory processes allowed to unveil framings, perspectives, values and interests, as well as understanding of the social and institutional context in which the waters are governed. The deployment of this methodological approach has in this case provided an extended diagnosis which was the starting point to explore non a priori foreseen management alternatives by the researchers. The methodological approach proved useful for problem structuring in a collective, flexible and iterative way, unveiling existing water management conflicts and their motivations, and improving the quality and effectiveness of the information exchange and the reflection process, among social actors, even if the whole process developed in a research setting rather than in a policy for real one. Participatory multi-criteria evaluation could in this case, contribute to identify policy options that could be better defended before all the social actors, including the general public, thus attempting to achieve shared ground. The paper suggests some methodological considerations for applying participatory multi-criteria evaluation based on the outcomes of the case study application. [Copyright &y& Elsevier]

This paper details the design and implementation of a participatory modelling process in the Baixo Guadiana River Basin, in Portugal. A group of stakeholders was involved in a causal mapping exercise that lead to the development of a shared view of the problems, pressures and impacts characterizing the river basin. A simulation model was also developed to support experimentation with alternative management scenarios for the area. The paper looks critically at the evaluation of the participatory modelling outcomes, both at the individual and group levels, discussing the role of this approach in supporting the scoping stages of river basin planning and management processes. On the downside, the unstable group composition seems to have hindered the chances of producing a higher impact in the functioning of the group, and subsequently the capacity to sustain the level of collaboration required to achieve the strategic river basin objectives established during the participatory modelling process. The paper discusses the issue of group stability as well as some options to overcome the limitations of unstable participant groups. The strengths of participatory modelling, as underlined by the Baixo Guadiana experience, include the flexibility to adapt the method to different contexts and participatory designs and the capacity to structure the active involvement of stakeholders, providing an open and shared language for collaborative policy design, fostering learning and knowledge integration. [Copyright &y& Elsevier]