Search

The aim of this contribution is to evaluate the usability of solar hybrid panels, which were originally optimized for heat load removal from buildings by radiation against the night sky, for water preheating. First we created a surrogate model based on CFD simulations defining performance of the panel dependent on changing boundary conditions. This model was then implemented to the water heating model created in TRNSYS software. Estimated hot water usage would suffice for operation of 2 restaurant facilities in a building of our interest. Subsequent simulations were carried out using reference year climate data for Brno (Central Europe). Results demonstrated that in the given conditions, the average annual efficiency of solar energy usage is 55%. The results also showed that the system is able to cover approximately 7% of the heat demand for water heating. [ABSTRACT FROM AUTHOR]

Thermal design of tubular heat exchanger based on condensation heat of water steam requires knowledge of condensation heat transfer in the each tube. This paper is just aimed on experimental analysis of steam condensation in vertical copper tube in length of 1285 mm with 2.0 mm inner diameter and 0.5 mm wall thickness. Experimental measurement is performed in 12 steps with variable inlet temperature and mass flow rate of water steam. The heat transfer coefficient on the inner surface of tube in condensation zone is calculated by Thermal resistance method and Wilson plot method. The correlation quality of results obtained from both methods is 98.8%. The results are compared with other experimental studies and also correlated with five chosen equations for prediction of condensation heat transfer coefficient. The correlation quality of results obtained from this experimental analysis and four tested equations is over 96.6%, only theoretically determined Nusselt equation undervalues condensation heat transfer coefficient as is known. The Nusselt equation does not take to account waves on condensate surface. These waves on condensate surface are caused by flow of water steam in tube and the wave’s effect is approximately 20.5% in this presented case. [ABSTRACT FROM AUTHOR]