9 results on '"Rashidi, Nor Adilla"'
Search Results
2. Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption.
- Author
-
Rashidi, Nor Adilla and Yusup, Suzana
- Subjects
- *
ACTIVATED carbon , *CHEMICAL precursors , *CARBON dioxide adsorption , *CHEMICAL potential , *KERNEL functions - Abstract
The increase in carbon dioxide (CO 2 ) concentration in atmosphere brings in major concern nowadays. Accordingly, a study on the volumetric CO 2 adsorption by using the palm kernel shell-based activated carbon synthesized via direct activation at 850 °C for 1 h has been investigated. The adsorbents are characterized using various analytical techniques to analyze the elemental, surface, and textural characteristics. Referring to the physiochemical analysis, it verifies that the proposed activation method effectively converts the palm kernel shell to value-added activated carbon material. The synthesized palm kernel shell-based activated carbon shows comparable CO 2 adsorption capacity and CO 2 /nitrogen selectivity with the commercial grade activated carbon. The regeneration study that has been carried out via pressure swing indicates easy regenerability and good stability after the multiple adsorption-desorption cycles. The experimental CO 2 adsorption isotherm data is examined by using several isotherm models – Langmuir, Freundlich, and Sips, by using non-linear regression method. The findings reveal that the Sips model mathematically represents the CO 2 adsorption, irrespective of adsorption temperature. Besides, heterogeneity characteristics of gas-solid adsorption is further confirmed through the isosteric heat of adsorption (Q st ) value that decreases with increasing surface loading. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
3. A review on recent technological advancement in the activated carbon production from oil palm wastes.
- Author
-
Rashidi, Nor Adilla and Yusup, Suzana
- Subjects
- *
ACTIVATED carbon manufacturing , *OIL palm , *AGRICULTURAL waste recycling , *ADSORPTION capacity , *HEATING , *CHEMICAL precursors - Abstract
The activated carbon is acknowledged as a promising adsorbent to be applied in various applications due to its low cost, well-developed pore structures, and high adsorption capacity. At present, the increasing abundance of oil palm wastes has resulted in various environmental problems. Accordingly, these agro wastes can be employed as potential low-cost precursors for the activated carbon production. This review paper presents a comprehensive overview on the recent advancement in the utilisation of oil palm wastes as the origin of the activated carbon production, specifically from the year 2011 to the present. Throughout this review paper, a strong emphasis is put on the recent activation methodology towards the oil palm residues. This includes the types of thermal heating mode: conventional furnace-heating and microwave-heating. The experimental designs applied in fabricating the activated carbons from the oil palm wastes are discussed. Overall, this review paper assists researchers to move forward in exploring a simple and economically-viable technique to produce oil palm wastes-based activated carbon with outstanding physiochemical properties and excellent adsorption capacity. [ABSTRACT FROM AUTHOR]
- Published
- 2017
- Full Text
- View/download PDF
4. Isotherm and Thermodynamic Analysis of Carbon Dioxide on Activated Carbon.
- Author
-
Rashidi, Nor Adilla, Yusup, Suzana, and Borhan, Azry
- Subjects
CARBON sequestration ,ISOTHERMAL processes ,THERMODYNAMICS ,ACTIVATED carbon ,COMBUSTION ,LOW temperatures - Abstract
In this study, commercial Norit® SX2 activated carbon has been evaluated as a solid adsorbent for carbon dioxide (CO 2 ) capture at the post-combustion conditions, which are at an ambient pressure and low temperatures (< 120 o C). The CO 2 equilibrium adsorption capacity is assessed through a static volumetric technique. This solid adsorbent is characterized in terms of elemental analysis, nitrogen physisorption, as well as surface morphology. The CO 2 adsorptive property of the commercial Norit® SX2 demonstrates a reduction in the amount of CO 2 adsorbed at an elevated temperature, and accordingly, it indicates that CO 2 adsorption is a physical adsorption process and demonstrates a behavior of an exothermic reaction, which consistent with the thermodynamics analysis. Different isotherm models are applied to mathematically model the CO 2 adsorption, and on basis of the regression coefficient (R 2 ), the Freundlich model provides a perfect fit to the experimental data, owing to closeness of the R 2 to unity. The result obtained in this study can serve as a benchmark while searching for inexpensive and superior activated carbon production in future studies. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
5. Removal of Cu2+ and Zn2+ from Single Metal Aqueous Solution Using Rubber-Seed Shell Based Activated Carbon.
- Author
-
Borhan, Azry, Abdullah, Nur Atikah, Rashidi, Nor Adilla, and Taha, Mohd Faisal
- Subjects
COPPER ions ,ZINC ions ,SINGLE crystals ,AQUEOUS solutions ,RUBBER ,SEEDS ,ACTIVATED carbon - Abstract
The aim of this study was to produce a low-cost activated carbon derived from rubber-seed shells using potassium hydroxide (KOH) as chemical agent. The effect of preparation conditions such as impregnation ratio (1:1 and 1:2), carbonization temperature (500, 600 and 700°C) and duration (90, 120, 150, 180 and 210 minutes) on the produced activated carbon were investigated. Sample B1 was identified to yield activated carbon with the largest surface area, total pore volume and diameter. The results from adsorption test found that under the effect of initial concentration, the optimum sample is capable of removing 98.8% of Zn 2+ and 99% of Cu 2+ at low concentration of 200 ppm. Under the effect of stirring rate, 99.7% of Zn 2+ and 99.6% of Cu 2+ is removed at stirring rate at 400 rpm. Finally under the effect of contact time, 99.6% of Zn 2+ and 94% of Cu 2+ removal is achieved at time of 45 minutes. The obtained results show that agriculture waste product from rubber-seed shell is a promising low cost precursor for the production of activated carbon and it can be effectively used as an adsorption material. [ABSTRACT FROM AUTHOR]
- Published
- 2016
- Full Text
- View/download PDF
6. Effects of experimental variables on conversion of cockle shell to calcium oxide using thermal gravimetric analysis
- Author
-
Mohamed, Mustakimah, Rashidi, Nor Adilla, Yusup, Suzana, Teong, Lee Keat, Rashid, Umer, and Ali, Razol Mahari
- Subjects
- *
LIME (Minerals) , *HIGH temperatures , *THERMOGRAVIMETRY , *PARTICLE size determination , *ROASTING (Metallurgy) , *CARBON dioxide adsorption - Abstract
Abstract: Calcination of CaCO3 is a process of producing CaO – a widely used substance in high temperature applications. However, the efficiency of the process depends on the variable involved and the assumption made. Therefore, this paper aims to illustrate the effects of few variables on calcination and carbonation reaction of CaCO3 via thermo-gravimetric analyzer (TGA) in order to optimize the process. In the present work, cockle shells were used as CaCO3 sources. The experimental variables i.e. particle size, heating rate, calcination and carbonation temperature were employed. A minimum of two runs of experiments for each variable were conducted and the standard deviation for all of the runs are found to be less than 1. Analysis of XRD, XRF and EDX indicates the conversion of CaCO3 in cockle shells to CaO after calcination. The optimum adsorptive capacity of synthesized CaO for CO2 at the optimum conditions is 0.72 kg CO2/kg CaO. [Copyright &y& Elsevier]
- Published
- 2012
- Full Text
- View/download PDF
7. Activated Carbon from the Renewable Agricultural Residues Using Single Step Physical Activation: A Preliminary Analysis.
- Author
-
Rashidi, Nor Adilla, Yusup, Suzana, Ahmad, Murni M., Mohamed, Norani Muti, and Hameed, Bassim H.
- Subjects
ACTIVATED carbon ,RENEWABLE natural resources ,CARBON dioxide ,AGRICULTURAL wastes ,PARTICLE size distribution ,PROPERTIES of matter - Abstract
Abstract: The feasibility of preparing activated carbon from single step carbon dioxide activation was studied. The optimization of the activated carbons were carried out to study the effects of precursors (coconut fiber, rice husk, coconut shell, palm kernel shell and palm mesocarp fiber), particle size (250-1000 μm), CO
2 flow rate (100-300 cm3 /min), heating rate (5-25̊C/min), reaction temperature (500-900̊C) and residence time (15-90 mins) on the physical properties of the activated carbon. For the process parameter optimization, L2 5 orthogonal array and “the-larger-the-better” response were employed to determine the optimum yield of the produced activated carbon. In addition, the proximate analysis, chemical compositions and the surface morphology of the raw materials and activated carbons were also discussed. The utilization of the agricultural residues as the activated carbon may help abating the environmental problems caused by irresponsible disposal of agro-wastes. [Copyright &y& Elsevier]- Published
- 2012
- Full Text
- View/download PDF
8. Enhancing the CO2 adsorption with dual functionalized coconut shell-hydrochar using Chlorella microalgae and metal oxide: Synthesis, physicochemical properties & mechanism evaluations.
- Author
-
Mohd Azmi, Nuradila Zahirah, Buthiyappan, Archina, Abdul Patah, Muhammad Fazly, Rashidi, Nor Adilla, and Abdul Raman, Abdul Aziz
- Subjects
- *
METALLIC oxides , *CARBON sequestration , *CHLORELLA , *MICROALGAE , *COCONUT , *MAGNESIUM , *CARBON dioxide , *CESIUM ions , *CARBON dioxide adsorption - Abstract
This study aims to develop an inexpensive, environmentally-friendly adsorbent for capturing CO 2 using coconut shells, widely abundant in Asian agricultural waste. The raw coconut shell adsorbent (CS) has undergone dual functionalization utilizing Chlorella microalgae and magnesium oxide (MgO) to enhance its physicochemical properties. Through dual functionalization, minimizing the loss of surface area and reducing the temperature sensitivity often occurring during CO 2 adsorption is possible. The surface morphology, functional groups, and thermochemical properties of CS-hydrochar were characterized and evaluated. The characterization demonstrates the successful development of the ternary composite (HCS-A-Mg), with a specific surface area of 1045 m2/g and containing nitrogen and metal oxide functional groups. XRD analysis of HCS-A-Mg reveals crystalline peaks at 36.8°, 42.9°, and 63°, confirming the successful impregnation of MgO. The adsorption result showed that HCS-A-Mg exhibits a higher CO 2 adsorption capacity of 2.63 mmol/g, 50% higher than pristine hydrochar (HCS). The adsorption study revealed that the CO 2 adsorption capacity of HCS-A-Mg can be maximized to 3.23 mmol/g at 101 °C and 4.6 bar. Adsorption isotherms shows that the non-linear Sips model best describes the adsorption process, indicating a multilayer adsorption mechanism with profound surface heterogeneity of n = 2.3 for HCS-A-Mg, signifying higher accessibility of gas molecules deep into pores, enabling a variety of adsorption sites for CO 2 binding. Selectivity and reusability studies were conducted to validate the adsorbent applicability for industrial applications. HCS-A-Mg has higher CO 2 /N 2 selectivity by 41–57% and 0.05% loss of adsorption capacity after the 10th cyclic operation, suggesting their suitability for industrial applications. This finding underscores the potential of microalgae and magnesium oxide in advancing carbon capture technology and addressing environmental challenges. [Display omitted] [ABSTRACT FROM AUTHOR]
- Published
- 2024
- Full Text
- View/download PDF
9. Optimization of hydrogen production in in-situ catalytic adsorption (ICA) steam gasification based on Response Surface Methodology.
- Author
-
Yusup, Suzana, Khan, Zakir, Ahmad, Murni Melati, and Rashidi, Nor Adilla
- Subjects
- *
PROCESS optimization , *HYDROGEN production , *CATALYSIS , *FLUIDIZED bed gasifiers , *BIOMASS gasification , *TEMPERATURE effect - Abstract
The present study investigates the optimization of hydrogen (H2) production with in-situ catalytic adsorption (ICA) steam gasification by using a pilot-scale fluidized bed gasifier. Two important response variables i.e. H2 composition (in percent volume fraction, %) and H2 yield (in g kg−1 of biomass) are optimized with respect to five process variables such as temperature (600 °C–750 °C), steam to biomass mass ratio (1.5–2.5), adsorbent to biomass mass ratio (0.5–1.5), superficial velocity (0.15 m s−1–0.26 m s−1) and biomass particle size (350 μm–2 mm). The optimization study is carried out based on Response Surface Methodology (RSM) using Central Composite Rotatable Design (CCRD) approach. The adsorbent to biomass mass ratio is found to be the most significant process variables that influenced the H2 composition, whereas temperature and biomass particle size are found to be marginally significant. For H2 yield, temperature is the most significant process variables followed by steam to biomass mass ratio, adsorbent to biomass mass ratio and biomass particle size. The optimum process conditions are found to be at 675 °C, steam to biomass mass ratio of 2.0, adsorbent to biomass mass ratio of 1.0, superficial velocity of 0.21 m s−1 that is equivalent to 4 times the minimum fluidization velocity, and 1.0 mm–2.0 mm of biomass particle size. The theoretical response variables predicted by the developed model fit well with the experimental results. [ABSTRACT FROM AUTHOR]
- Published
- 2014
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.