Search

• We propose a scheme to measure spectrum, image, and full polarization of targets using polarization modulation array, which offers us a novel method for polarization modulation-demodulation. • The principle and the detection mode of the scheme has been demonstrated. It has no slit and internal moving elements, which makes the system high throughput, robust and compact. • The feasibility of the system has been verified by simulation and experiment. The systematic errors and the sensitivity to noise of the system has been analyzed. • With specified optical designs, this system can be applied in many fields such as remote sensing, biomedical diagnosis, and target identification. In this paper, we propose an instrument concept based on a polarization modulation array for the simultaneous measurement of the irradiance, spectrum, and polarization states of the target of interest. Using a group of retarders and polarizers oriented in specific directions, the full set of Stokes parameters can be determined directly without internal moving parts or extensive calculations. The polarization array consists of two retarders and four linear polarizers located at the incident aperture, so that the incident light is divided into four separate modulation channels. To measure the modulated spectra, we include an interference spectrometer based on the Savart polariscope principle in the system and retrieve the polarization spectra by Fourier transform. We apply a tempo-spatially modulation mode in the scheme to extract the multi-dimensional data of each point in the field of view. The system's performance, especially the capability for Stokes spectra measurement, is verified through both computer simulation and laboratory experiments. Possible sources of error are also analyzed. [ABSTRACT FROM AUTHOR]

The theoretical operation and experimental demonstration of a Fourier-transform linear imaging spectropolarimeter are presented. It is composed of a rotating Glan-Taylor prism and a Fourier-transform spectrometer based on Savart polariscope. The polarized light enters the spectrometer to create three sets of interferograms, where the spectral linear Stokes parameters can be calculated and acquired. Compared with previous instruments, the significant advantages of the described sensor are that there are no spatial aliasing in the polarized spectra and it can be used in wider spectral coverage with low cost, ultra-compact size and a simpler common-path configuration. Another static linearly Stokes imaging spectropolarimeter based on the field of view division technique and SPIIS is conceptually described. The spectral dependence of linear Stokes parameters can be recovered with Fourier transformation. Since there is no rotating or moving parts, the system is relatively robust. [ABSTRACT FROM AUTHOR]