Search

Paper and pulp mills generate substantial quantities of cellulose-rich sludge materials that are disposed in landfills at a large scale. For sustainability purposes, sludge materials can be bioprocessed to produce renewable fuels and useful chemicals. The enzymatic hydrolysis of cellulose is the process bottleneck that affects the conversion economics directly by using zero-cost raw materials. In order to study and optimize the process, the characteristics of the sludge raw materials should be first evaluated. In this work, sludge samples were obtained from paper mills located at different locations in Wisconsin and Minnesota. Part of the sludge samples was washed (de-ashed) with hydrochloric acid while the other part remained unwashed. The samples were subjected to multiple spectroscopic analyses techniques to evaluate the morphological properties of cellulose fibers and to estimate the total structural carbohydrate content. The results showed that the de-ashing process changed some fiber characteristics and cellulose crystallinity structure in all sludge samples. Sludge sample A (obtained from Kraft pulp and recycled paper mill region) showed a high percentage of fiber, with crystalline cellulose, compared to the other two sludge samples suggesting that sludge A is a valuable source to make value-added products. Aspen Plus mass and energy calculations performed in view of the 'zero' cost and the reliable supply of sludge raw materials producing 2 mol H 2 /mol glucose. Moreover, the results showed that extracting crystalline cellulose from these sludge samples is more profitable than crystalline cellulose made from the other lignocellulosic feedstocks. The results reported here showed that the utilization of these sludge materials would be an economically attractive and promising alternative for the production of hydrogen. Image 1 • A new method for paper mill sludge (PMS) characterization as renewable feedstock. • The deashing step has a major effect on the bioconversion of the PMS. • Studying the crystalline cellulose of the PMS. • A relation between the characterization and potential sugar yield was established. [ABSTRACT FROM AUTHOR]

Biomass is one of the most feasible renewable alternatives to fossil fuels. Given this fact, this study aims to demonstrate that buriti fruit wastes (pits and husks) are a promising new feedstock for bioenergy production via thermochemical conversion. To evaluate the suitability of buriti pits and husks for bioenergy generation, their physicochemical properties, performance indices, and pyrolytic behavior were evaluated based on ultimate, proximate, and calorimetry analyses, emission factors, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM images), energy dispersive spectrometry (EDS), thermal analysis (TG/DTG/DSC curves), and devolatilization index (DI). In addition, the mineral and metal contents were quantified by inductively coupled plasma optical emission spectroscopy (ICP-OES). The buriti wastes exhibited low ash (< 3.2%) and moisture contents (< 13.0%), a high heating value (HHV) of 16.11–20.61 MJ kg−1, negligible nitrogen content (< 1.2%) and sulfur (non-detected), and lower carbon dioxide (1236–1244 g kg−1) and nitrogen oxides (3.32–3.95 g kg−1) emission factors than those of reference fuels. The physicochemical properties of buriti pits and husks were consistent with those of other agroforestry and agroindustrial biomasses. The DI of 1.47 and 5.27 × 10−8 mg min−1 °C−3 (or 0.35 and 1.17 ×10−6% min−1 °C−3) of buriti pits and husks, respectively, revealed the main difference between the thermal performance and suitability of buriti pits and husks for the partial or total replacement of fossil fuels. The buriti wastes displayed exceptional performance under direct combustion, and a comparison of buriti pits and husks highlighted the remarkable suitability of buriti pits for pyrolysis, probably due to the oleaginous nature of the material. • Buriti pits and husks were assessed for physicochemical and thermal properties. • Buriti wastes employment reduced 38.00% of gaseous emissions when compared to coal. • Buriti seeds presented a suitable pyrolytic behavior than reference fuels. • Buriti husks presented higher fixed carbon content compared to buriti pits. [ABSTRACT FROM AUTHOR]

In order to produce clean energy from renewable lignocellulosic biomass, the feedstock must be pretreated by means of one or combined cost-competitive methods to make the entire process economically feasible. Fungal cultivation may be one promising pretreatment approach, for which the effectiveness varies with different fungal strains in regard to biomass loss, sugar yield, enzyme loading, and co-product yield. Wild-type fungus might have a great potential in pretreating feedstock for both lowered enzyme loading and beneficial co-product enzyme production. In this study, 25 diverse fungal strains were screened for pretreatment of switchgrass biomass with regard to co-production of beneficial enzymes and the subsequent saccharification process, by examining switchgrass biomass loss, effectiveness of enzymatic hydrolysis, and ligninolytic activity. The most promising fungus was identified as an inedible mushroom, Agaricus molybdites (H4) with the highest saccharification efficiency and ligninolytic enzyme production. Additionally, eight accessory enzymes, e.g. pectinase, esterase, xylanase, β-glucosidase, chitinase, lipase, α-amylase, and laccase, were found to assist cellulase in enhancing saccharification of H4 pretreated switchgrass to varying degrees. Our experimental results suggest that pretreatment of switchgrass with an appropriate fungus, followed by exposure to cellulase and synergistic accessory enzymes can be an effective strategy for maximizing the process of saccharification. [ABSTRACT FROM AUTHOR]

Lignocellulosic biorefineries that plan to use switchgrass ( Panicum virgatum L.) biomass exclusively will encounter both temporal (across years) and spatial (across locations within a given year) variability in feedstock production. Long term land leases could be employed to facilitate feedstock availability for the expected life of the biorefinery. If the quantity of land leased is based on average yields, in some years more biomass will be produced than can be processed. In other years feedstock production on the leased land may be insufficient to prevent biorefinery downtime. An optimal strategy for identifying which land to lease and seed to switchgrass, while considering yield variability and the opportunity cost of biorefinery downtime, is the focus of the research. The objective is to determine for a given biorefinery location the least-cost quantity, quality, and location of land to lease for alternative estimates of biorefinery downtime cost due to variable switchgrass yields. Fifty years of weather data are used to simulate switchgrass yield distributions for a case study region. An innovative mathematical programming model is developed and used to reveal the cost-efficient D (Downtime Cost) L (Land to Lease) frontier for a 2 Gg d −1 biomass capacity biorefinery. If interyear storage is not permitted, 60,492 ha would be required to insure that the biorefinery run at full capacity every year given the estimated yield distributions. However, for some circumstances, it would be optimal to produce switchgrass on only 49,464 ha and idle the biorefinery for some days in low biomass production years. [ABSTRACT FROM AUTHOR]

To reduce the recalcitrance of lignocellulosic biomass for subsequent biological processing, we pretreated energy crop feedstocks with mild steam treatment (ST; 130 and 150 °C for 60 min) and wet disk milling (WDM). We tested two phylogenetically different, but typical energy crop feedstocks: Populus trichocarpa and switchgrass ( Panicum virgatum ). WDM after ST facilitated the fibrillation of both types of biomass, resulting in an increase of specific surface area, improved enzymatic saccharification yield, and decrease in cellulose crystallinity. After steam treatment at 150 °C followed by 17 cycles of WDM, enzymatic hydrolysis resulted in almost complete glucan to glucose conversion in both feedstocks. [ABSTRACT FROM AUTHOR]

Marginal and degraded lands are expected to be important resources in the production of biofuel feedstocks in order to avoid real or perceived competition with food, feed and fiber production. Globally, there are millions of hectares of salt-affected land available for lignocellulosic feedstock production. Greenhouse experiments determined the effects of irrigating with water having different levels of salinity and sodicity on seedling emergence, plant growth, and cation balance in plant tissues in several populations of switchgrass ( Panicum virgatum L.) and prairie cordgrass ( Spartina pectinata Link). The effect of salt stress on seedling emergence was more pronounced in switchgrass than prairie cordgrass with 31 and 15% reduction, respectively, compared with pure water. In a two-season greenhouse pot experiment, aboveground dry biomass production in control treatments was 8 and 21% higher in prairie cordgrass pc17-102 and pc17-109, respectively, than in EG 1102 switchgrass. Switchgrass EG 1102 produced greater biomass than prairie cordgrass populations when irrigated with moderately saline (5 dS m −1 ) water, although differences were not detected with highly saline water (10 dS m −1 ). Switchgrass EG 2101 emergence, plant growth and cation balance were severely affected by increasing levels of salinity. Overall, several prairie cordgrass populations and lowland switchgrass cultivars were found to have good emergence and high biomass production under moderate to high salt stress and may be good candidates for lignocellulosic feedstocks on salt-affected land. [ABSTRACT FROM AUTHOR]

Abstract: Switchgrass was used as a lignocellulosic feedstock for second generation ethanol production, after pretreatment using sulfuric acid-catalyzed modified clean fractionation based on NREL’s (National Renewable Energy Laboratory) original procedure. Optimization of temperature, catalyst concentration and solvent composition was performed using Response Surface Methodology, and 59.03±7.01% lignin recovery, 84.85±1.34% glucose, and 44.11±3.44% aqueous fraction xylose yields were obtained at 140.00°C, 0.46% w/w catalyst concentration, 36.71% w/w ethyl acetate concentration, and 25.00% w/w ethanol concentration. The cellulose fraction did not inhibit the fermentation performance of Saccharomyces cerevisiae and resulted in an ethanol yield of 89.60±2.1%. [Copyright &y& Elsevier]

Abstract: Feedstock quality of switchgrass for biofuel production depends on many factors such as morphological types, geographic origins, maturity, environmental and cultivation parameters, and storage. We report variability in compositions and enzymatic digestion efficiencies for three cultivars of switchgrass (Alamo, Dacotah and Shawnee), grown and harvested at different locations and seasons. Saccharification yields of switchgrass processed by different pretreatment technologies (AFEX, dilute sulfuric acid, liquid hot water, lime, and soaking in aqueous ammonia) are compared in regards to switchgrass genotypes and harvest seasons. Despite its higher cellulose content per dry mass, Dacotah switchgrass harvested after wintering consistently gave a lower saccharification yield than the other two varieties harvested in the fall. The recalcitrance of upland cultivars and over-wintered switchgrass may require more severe pretreatment conditions. We discuss the key features of different pretreatment technologies and differences in switchgrass cultivars and harvest seasons on hydrolysis performance for the applied pretreatment methods. [Copyright &y& Elsevier]

Abstract: In this study, the potential of biobutanol was evaluated as an alternative to bioethanol which is currently the predominant liquid biofuel in the US. Life-cycle assessments (LCAs) suggest that the net energy generated during corn-to-biobutanol conversion is 6.53MJ/L, which is greater than that of the corn-derived bioethanol (0.40MJ/L). Additionally, replacing corn with lignocellulosic materials in bioethanol production can further increase the net energy to 15.90MJ/L. Therefore, it was interesting to study the possibility of using domestically produced switchgrass, hybrid poplar, corn stover, and wheat straw as feedstocks to produce liquid biofuels in the US. By sustainable harvest based on current yields, these materials can be converted to 8.27 billion gallons of biobutanol replacing 7.55 billion gallons of gasoline annually. To further expand the scale, significant crop yield increases and appropriate land use changes are considered two major requirements. [ABSTRACT FROM AUTHOR]

Abstract: Ethanol production using solid digestate (AD fiber) from a completely stirred tank reactor (CSTR) anaerobic digester was assessed comparing to an energy crop of switchgrass, and an agricultural residue of corn stover. A complete random design was fulfilled to optimize the reaction conditions of dilute alkali pretreatment. The most effective dilute alkali pretreatment conditions for raw CSTR AD fiber were 2% sodium hydroxide, 130°C, and 3h. Under these pretreatment conditions, the cellulose concentration of the AD fiber was increased from 34% to 48%. Enzymatic hydrolysis of 10% (dry basis) pretreated AD fiber produced 49.8g/L glucose, while utilizing 62.6% of the raw cellulose in the AD fiber. The ethanol fermentation on the hydrolysate had an 80.3% ethanol yield. The cellulose utilization efficiencies determined that the CSTR AD fiber was a suitable biorefining feedstock compared to switchgrass and corn stover. [ABSTRACT FROM AUTHOR]

The ionic liquid trihexyltetradecylphosphonium hydrogen sulphate (THTDP HSO 4) was used to extract cellulose from various lignocellulosic sources:- wheat straw, perennial ryegrass, willow, anaerobic digestate (AD) and spent mushroom compost (SMC). This was compared with a traditional dilute sulphuric acid extraction to evaluate the potential for this ionic liquid to be of use in the biorefining industry. The use of ultrasonication to facilitate the reaction was also tested. Results showed that this ionic liquid, which combines the features of a hydrophobic solvent with an acidic catalyst was effective in hydrolysing lignocelluloses. Compared to the use of dilute sulphuric acid, the ionic liquid produced purer, more thermally stable cellulosic fibres. It was also shown to be as effective as the dilute sulphuric acid in pretreating lignocelluloses for enzymatic hydrolysis. Finally, ultrasonication was shown to be compatible with the ionic liquid and suggests an energy efficient method for pretreatment of lignocellulose. [ABSTRACT FROM AUTHOR]