Search

In this work, we demonstrated the effectiveness of using spray-assisted interfacial polymerization (IP) technique in fabricating liposome-integrated thin film nanocomposite (TFN) membranes for seawater reverse osmosis (SWRO). The liposome loading within the selective polyamide (PA) layer of the TFN membrane can be precisely controlled by manipulating spraying conditions to eliminate the wastage of precious additives compared to the conventional blending method. Spraying the liposomes after applying the aqueous phase of M -phenylenediamine (MPD) could prevent the loss and disruption of liposome distribution over the substrate layer. Upon incorporating 4 mg/m2 of liposomes, the best-performing S4-a membrane is able to achieve 27% higher water permeability than the liposome-free membrane, demonstrating a permeability of 3.24 L/m2·h·bar along with 99.3% NaCl rejection for seawater desalination. Characterization showed that dynamic liposomes had affected the IP process by creating a larger miscible reaction zone for IP, which led to the formation of a rougher PA surface with more nanovoids in the ultra-thin selective layer, thus, contributing to higher effective surface area and less hydraulic resistance for improving water permeability. An additional PVA layer was coated atop the liposome-integrated membrane to effectively improve the membrane stability and fouling resistance, leading to a comparable level of salt rejection with the state-of-the-art commercial membranes in treating real seawater, while water permeability was enhanced by 26–185%. This work presents a readily scalable spray-assisted IP technique to fabricate liposome-integrated SWRO membrane for seawater desalination. [Display omitted] • DOPC liposomes were integrated into PA layer via spray-assisted IP approach. • Spraying DOPC liposomes after aqueous phase of IP ensured precise control of liposome amount. • DOPC liposomes resulted in forming a rougher PA surface with larger nanovoids. • The best membrane exhibited 3.24 L/m2·h·bar permeability with 99.3% NaCl rejection. • PVA coated liposome-integrated membrane demonstrated excellent stability and fouling resistance. [ABSTRACT FROM AUTHOR]

Developing a reverse osmosis membrane with desirable water/salt selectivity and boron removal has been recognized as crucial for high-efficient seawater desalination. Herein, fluorinated seawater reverse osmosis (SWRO) membranes were fabricated via fluorine-containing monomers-mediated interfacial polymerization or surface modification by grafting fluorine-containing monomers atop nascent polyamide (PA) layer via a second interfacial reaction. The fluorinated molecules, 5-(trifluoromethyl)-1.3-phenylenediamine (TFPD), 3,5-bis(trifluoromethyl) benzoyl chloride (TFBC) or 2,2,2-trifluoroethylamine (TFEA), were confirmedly integrated into the PA matrix presumably via strong chemical covalent bonds, which manipulated the physicochemical properties of the PA layer, including surface hydrophilicity, pore size distribution, cross-linking degree and interactions between membrane and solutes, thereby producing a high-selectivity thin-film composite (TFC) membrane. The optimized membranes, i.e. , TFC-TFPD, TFC-TFBC and TFC-TFEA, presented significantly excellent separation performance than the control and commercial membrane, both in water/salt selectivity and boron removal capability, accompanied by a comparable water permeance. Among the three proposed incorporation method of fluorinated monomers, direct grafting of TFEA upon the nascent PA layer demonstrates the best efficiency in introducing fluorine elements in the TFC PA membranes, compared to the addition of TFPD and TFBC into aqueous and organic phases during IP process, respectively. The fluorine-incorporated strategy employed in this present work offered a new design of the PA layer containing fluorinated molecules to obtain the desired permselectivity of TFC SWRO membranes towards efficient removal of salt and boron acid in seawater desalination. [Display omitted] • The fluorinated PA-based TFC SWRO membranes were successfully developed. • The fluorine-containing monomers were covalently bonded with PA matrix without sacrificing its integrity. • The incorporation of fluorine elements effectively regulated physicochemical properties of the PA layer. • The in-situ integrated fluorine components enabled high-efficient water/salt selectivity and boron removal. [ABSTRACT FROM AUTHOR]

In this work, we explored the practicability of a nanochannel-based biomimetic membrane (NBM) incorporating pillar[5]arene water channels for seawater reverse osmosis (SWRO) desalination. Two classes of peptide-attached biomimetic channels, (pR)-pillar[5]arenes (pRPH) and (pS)-pillar[5]arenes (pSPH) were integrated into the selective layer of SWRO membranes via interfacial polymerization on the top side of a polysulfone (PSf) support membrane. Here, pSPH is a non-identical stereoisomer of pRPH and was used as a negative control to pRPH to elucidate the flux enhancement effect contributed by pRPH. The optimized NBM presented a water permeability of 2.52 L m-2 h-1 bar-1 and 99.5% rejection under SWRO testing conditions of 50 bar applied pressure and 32,000 mg/L NaCl as feed solution. The 62% permeability increment with reference to the control membrane is hypothesized to originate from hybrid polyamide layers that were rougher with more voids (higher effective surface area and lower hydraulic resistance for water transport) as well as the conceivable water transport pathways provided by the pRPH channels. The simulation results from module-scale modelling suggest that the optimized NBM could lead to 7.2% savings in specific energy consumption of the membrane unit stage (or reduce the required membrane area by 25%) with respect to the commercial SWC4-LD membrane. The performance of the optimized NBM was further assessed in a one-week desalination test using an actual seawater feed gathered from an SWRO plant in Singapore. The robust NBM exhibited stable performance and ∼28% higher water flux (42 L m-2 h-1) than SWC4-LD with a comparable rejection of 99.3%, suggesting the feasibility of pillar[5]arene-based biomimetic membranes for seawater desalination. [Display omitted] • pRPH nanochannel-based biomimetic membrane (NBM) was used for SWRO application. • pRPH channels were incorporated into the PA layer via interfacial polymerization. • High permeability of 2.52 Lm-2h-1bar-1 (99.5% NaCl rejection) was reported in SWRO. • The energy and footprint savings achievable was quantified by module-scale modelling. • The NBM exhibited stable flux in a 7-day desalination test using real seawater. [ABSTRACT FROM AUTHOR]