Search

This study focuses on enhancing the mechanical strength of aquaporin (AQP)-based biomimetic membranes for seawater desalination. AQP incorporated vesicles were embedded into the selective layer of an optimized thin film composite (TFC) membrane. The resultant membrane, denoted as ASW, exhibited a stable water flux around 20 L·m−2·h−1 and 99% NaCl rejection at a constant pressure of 55 bar using 32,000 mg·L−1 NaCl solution as feed in reverse osmosis (RO) measurement. The robustness of the ASW membranes were evaluated. The water flux of ASW membrane was almost 100% enhanced compared with that of AQP-free control TFC membranes. The filtration performance of the ASW membrane was further evaluated by a seven-day desalination test using a real seawater secondary effluent collected from a desalination plant in Singapore as feed. To our best knowledge, our study is the first report on the AQP-incorporated RO membrane applied for seawater desalination. A commercial SW30HR membrane was tested in parallel for comparison. The robust ASW membrane exhibited a nearly 80% higher water flux in comparison to the SW30HR membrane with a comparable overall solute rejection, suggesting the advantage and feasibility of Aquaporin based biomimetic membranes for seawater desalination. • The mechanical strength of aquaporin incorporated polyamide layer was characterized with AFM. • The effects of high pressure compaction and salinity on aquaporin incorporated polyamide layer were investigated. • The aquaporin based biomimetic membranes were optimized for seawater desalination (SWRO) application. • A seven-day SWRO measurement of the ASW was conducted using a real seawater secondary effluent. [ABSTRACT FROM AUTHOR]

In this work, we explored the practicability of a nanochannel-based biomimetic membrane (NBM) incorporating pillar[5]arene water channels for seawater reverse osmosis (SWRO) desalination. Two classes of peptide-attached biomimetic channels, (pR)-pillar[5]arenes (pRPH) and (pS)-pillar[5]arenes (pSPH) were integrated into the selective layer of SWRO membranes via interfacial polymerization on the top side of a polysulfone (PSf) support membrane. Here, pSPH is a non-identical stereoisomer of pRPH and was used as a negative control to pRPH to elucidate the flux enhancement effect contributed by pRPH. The optimized NBM presented a water permeability of 2.52 L m-2 h-1 bar-1 and 99.5% rejection under SWRO testing conditions of 50 bar applied pressure and 32,000 mg/L NaCl as feed solution. The 62% permeability increment with reference to the control membrane is hypothesized to originate from hybrid polyamide layers that were rougher with more voids (higher effective surface area and lower hydraulic resistance for water transport) as well as the conceivable water transport pathways provided by the pRPH channels. The simulation results from module-scale modelling suggest that the optimized NBM could lead to 7.2% savings in specific energy consumption of the membrane unit stage (or reduce the required membrane area by 25%) with respect to the commercial SWC4-LD membrane. The performance of the optimized NBM was further assessed in a one-week desalination test using an actual seawater feed gathered from an SWRO plant in Singapore. The robust NBM exhibited stable performance and ∼28% higher water flux (42 L m-2 h-1) than SWC4-LD with a comparable rejection of 99.3%, suggesting the feasibility of pillar[5]arene-based biomimetic membranes for seawater desalination. [Display omitted] • pRPH nanochannel-based biomimetic membrane (NBM) was used for SWRO application. • pRPH channels were incorporated into the PA layer via interfacial polymerization. • High permeability of 2.52 Lm-2h-1bar-1 (99.5% NaCl rejection) was reported in SWRO. • The energy and footprint savings achievable was quantified by module-scale modelling. • The NBM exhibited stable flux in a 7-day desalination test using real seawater. [ABSTRACT FROM AUTHOR]

Recent research pays much attention to the correlations between structural properties of porous substrate and the separation performance of polyamide (PA) thin film composite (TFC) membrane prepared by interfacial polymerization (IP). However, there are limited studies focused on seawater reverse osmosis (SWRO) membrane preparation and optimization. This study reveals profound impacts of substrate surface properties on the separation properties of SWRO membranes, by using different substrates including commercial ultrafiltration (UF) membrane, lab-scale casted polysulfone (PSF) substrate and pilot-scale casted PSF substrates. We demonstrate that the membrane substrates casted using pilot-scale machine led to better SWRO performance than hydrophilic UF membrane or lab-scale casted substrate; and very different SWRO membranes could be made from pilot-scale substrates casted using the same polymer dope solution. These results showed that a high-performance SWRO membrane relies on appropriate substrate possessing the surface properties of relatively hydrophobic, small surface pore size (20-35 nm) and high surface porosity, which directly affect the supply and transport rate of amine for the IP reaction. Our best SWRO membrane exhibits an excellent NaCl rejection of 99.5% together with high water permeance of 1.72 L m−2 h−1 bar−1 under seawater desalination conditions. This work helps pave the way for substrate selection for SWRO membrane fabrication, narrowing the gap between lab-made and commercial SWRO membranes. [Display omitted] • Substrates with tuned surface properties were used to tailor SWRO membrane performance. • PSF substrates casted by a pilot-scale machine exhibited better SWRO performance. • The best-performing membrane demonstrated water permeance of 1.72 Lm−2h−1bar−1 and rejection of 99.5%. • Hydrophobic substrate of small surface pore size and high surface porosity was important for making excellent SWRO membrane. [ABSTRACT FROM AUTHOR]

Seawater reverse osmosis (SWRO) is the key technology driving an energy-efficient and cost-effective desalination process. At the center of this technology are the thin film composite (TFC) membranes, which not only promise a stable operation but also high separation performances. The objective of this review is to consolidate recent advances in SWRO membranes from the standpoint of membrane materials, fabrication methodologies and applications. First, the thermodynamic limit and energy consumption of SWRO desalination are reviewed, before we discuss the current status of SWRO membranes, highlighting the four main challenges to date – permselective tradeoff, relatively low single-pass boron rejection, membrane fouling and poor chlorine resistance. Thereafter, a comprehensive review of the membrane development is presented. We examine findings reported in research papers and patents, and various methods to achieve SWRO membranes of higher permselectivity, boron rejection, and chlorine resistance as well as lower fouling propensity. Key insights from the membrane industry are also furnished. Then, we put together an outlook, featuring our perspectives on SWRO membrane development. Empirical data in this review are collated into an upper-bound relationship, which is tailored specifically for SWRO membranes and expected to provide benchmarking for future SWRO membrane development. Since the traits of SWRO membranes are unique from those of brackish water RO (BWRO) membranes, we also distinguish the methods used for SWRO membrane fabrication to help zero in on the correct strategies, and provide insights for advancing new membrane designs. Overall, this review sums up the current state-of-the-art SWRO membranes, looking at the array of fabrication methods used thus far, and putting into perspective critical strategies to realize the next-generation TFC membranes that can address the future demands of SWRO and deliver a more competitive desalination process. [Display omitted] • Recent advances in SWRO membrane are collated from papers and industrial patents. • Current status and future outlook of SWRO membrane industry are discussed. • A permselectivity upper bound is established specifically for SWRO membranes. • The upper bound is given by A/B = 46.75 A −1.72 (A/B in bar−1 and A in Lm−2h−1 bar−1). • A roadmap for SWRO membrane fabrication is proposed (short/long-term strategies). [ABSTRACT FROM AUTHOR]

Membrane fouling occurs in all membrane processes. Surface modifications have gained popularity for enhancing membrane antifouling capability via introducing a hydrophilic component or reducing membrane surface roughness. In this work, we proposed to develop a green antimicrobial lysozyme nanofilm on the polyamide membrane surface with remarkable antibacterial and antifouling properties to effectively reduce membrane fouling. The nanofilm is rooted in the molecular assembly of a protein which is an extraction of food and natural products. The nanofilm exhibits the combination of various functions including antimicrobial, antifouling and antibiofilm. This protein-based nanofilm is robustly transferred and self-adhered on the membrane surface by a simple one-step aqueous coating. The modified RO membrane exhibited good performance in bacterial reduction of ~50% in comparison to the control membrane and experienced almost zero loss in water flux and salt rejection under SWRO testing condition. The membrane is further evaluated with real seawater for 14 days and the modified membrane showed its superiority in flux and fouling control which were verified by the confocal laser scanning microscopy (CLSM) and quantified by inductively coupled plasma optical emission spectrometer (ICP-OES). This work demonstrates that the protein-based biomaterials offer a safe and environmentally friendly way of antimicrobials, which can reduce membrane fouling significantly in membrane filtration. Unlabelled Image • A protein-based antimicrobial nanofilm was in-situ fabricated on a commercial SWRO membrane surface. • The modification did not change the SWRO membrane's selectivity and water permeability. • The modified membrane demonstrated ~50% bacterial reduction compared to the control membrane. • The modified membrane had good anti-fouling property applied in SWRO. [ABSTRACT FROM AUTHOR]

Although a highly porous support membrane has attracted increasing attention as an alternative to enhance the water permeability of a thin-film composite (TFC) membrane without compromising salt rejection, its feasibility has not ever been tested in seawater desalination. This study explored the availability and potential of a highly porous microstructured (HPμS) support membrane as a support for a seawater reverse osmosis (SWRO) membrane. Our lab-made membranes, TFC-HPμS, exhibited a higher water permeability of 1.62 L m−2 h−1 bar−1 as compared with most of the state-of-the-art SWRO membranes recently reported in the literature, while achieving comparable NaCl rejection (99%) in SWRO test condition (55 bar, 35,000 mg L−1 of NaCl). This excellent performance is thought to stem from the HPμS support endowing a TFC membrane with comparable mechanical properties to that of existing support used for conventional SWRO membrane and shortened effective diffusion pathway of water molecules over the active layer. The robustness and enhanced mechanical strength of the TFC-HPμS membrane are attributed to its narrow and regularly arranged finger-like structure ensuring the even distribution of local stresses, thereby eliminating the presence of stress convergence points. The shortened effective diffusion pathway was estimated to be achieved mainly by less localized surface pores due to the HPμS support's highly porous surface with a larger number of even distributed surface pores. This study potentially opens up another workable pathway in the fabrication of SWRO membranes with enhanced performance without significant sacrifice of the selectivity. • Highly porous microstructured support membrane was used for seawater desalination. • The regularly arranged sublayer enhanced the mechanical strength of the support. • The effective diffusion pathway can be shortened with less localized surface pores. • The tuned TFC membrane exhibited higher permselectivity as compared to the control. • High permeability of 1.62 Lm−2h−1bar−1 (>99% NaCl rejection) was reported in SWRO. [ABSTRACT FROM AUTHOR]