Search

• 72% − 80% of fibre was recovered from disposable coffee cups. • 2% and 3% consistency shredded cups required > 100 kWh/tonne to repulp with 3 refiner passes. • Pulp quality did not significantly diminish after repulping using a single-disk refiner. Over 64 billion paper-plastic laminate (PPL) coffee cups are consumed between the United States and Canada annually, the majority accumulating in landfills due to a hydrophobic plastic inner-lining. Recycling can mitigate environmental damage and provide economic value from repurposed products. We found that standard repulping methods were insufficient to separate fiber from plastic due to the low intensity of treatment. To increase process intensity, we mechanically refined shredded PPL coffee cups and Kraft eucalyptus sheets (control) at 2%, 3%, and 4% consistencies with three passes to determine the energy required to separate fibers from plastic and the effects on fiber quality. 2% and 3% consistency PPL cups measured under 40 kWh/tonne of input material for one refiner pass and ∼ 80 kWh/tonne for 4% consistency PPL cups. Recovered fiber fraction totaled 87.7%, 85.3%, and 80.5% of input mass of Kraft eucalyptus and 72.3%, 72.6%, and 79.6% of input mass of PPL cups at 2%, 3%, and 4% consistency, respectively. Fines content of PPL cups jumped from 8% pre-refining to ∼ 30% post-refining while Kraft eucalyptus fibers were unaffected, suggesting that breaking the plastic-fiber bonds results in fines generation. Mean fiber length of PPL cups slightly decreased with consistency and tensile strength improved. Freeness decreased with consistency only in PPL cup samples. These results demonstrate a low energy requirement to effectively separate fiber and plastics in PPL cups as well as minimal impact on fiber quality using existing refining technology, and provides an estimate of the financial costs of local recycling efforts. [ABSTRACT FROM AUTHOR]

Reports on the determination of structure, height and diameter growth, above-and below-ground biomass and nutrient distribution of a paper birch and subalpine fir mixed species stand in the Sub-Boreal Spruce zone of British Columbia. Findings that suggest normal distribution of height and diameter in paper birch; Distribution pattern of subalpine fir; Total biomass of both plants.

Growth and survival responses of 8 year-old interior spruce to reductions in paper birch density from 2500 to 1000, 50 and 0 overtopping stems ha[sup -1] were examined after five years on a single site in the Interior Cedar Hemlock biogeoclimatic zone of southern British Columbia. Stem diameter increased and height: diameter ratio decreased when birch density was reduced from 2500 to 50 stems ha[sup -1], but there were no further benefits to spruce growth when the entire birch overstory was removed. Spruce growth did not improve where birch was thinned to 1000 stems ha[sup -1], but its potential for release may have been confounded by the higher density of taller conifers in that treatment. Interspecific competition between spruce and paper birch appeared to be primarily for light because spruce responded to dramatic reductions in overstory density but not to reductions in understory sprout density. Spruce survival was unaffected by thinning treatments, indicating that birch density of 2500 stems ha[sup -1] was too low to induce mortality. Armillaria root disease was the main cause of mortality, and spruce leader weevil and Cooley's spruce gall adelgid were important damaging agents, but the behaviour of these organisms was unaffected by treatment. Stand structure was dramatically changed from a mixed coniferous-deciduous to a predominantly coniferous overstory when birch was thinned to 50 or 0 stems ha[sup -1], which may have negative implications for wildlife. If balancing maximum spruce growth with biodiversity is the primary objective, then between 50 and 1000 stems ha[sup -1] birch should be retained on sites similar to the one used in our experiment. This will require modification of the current legislation governing reforestation in British Columbia. [ABSTRACT FROM AUTHOR]

Efforts to prevent work-related injuries have met with tangible success in industrialized countries. In Quebec, workplace accidents and occupational illness have declined sharply since the end of the 1990s. However, there is still considerable room for improvement in small and medium-sized enterprises (SMEs). Expert specialists in accident prevention in SMEs are overloaded. Their interventions are repetitive and not personalised. Few tools are available for accelerating the process of evaluating occupational health and safety (OHS) performance. The aim of this research project was to address this deficiency by proposing a novel OHS performance evaluation tool better adapted to SMEs. For this purpose, research was carried out in two distinct phases. The first phase led to the theoretical model on which the tool is based. The second phase was carried out using an action research approach. The proposed tool was designed and improved during this phase, through field-testing and the involvement of a Quebec industrial partner. In spite of the limitations of this research, we have succeeded in developing a new tool with software support adapted specifically for the evaluation of OHS performance in SMEs. Upon completion of the project, a tested and improved version of the tool was delivered to the industrial partner. Experts in accident prevention have found the tool to be reliable and helpful. It has accelerated the identification of deficiencies in OHS management in several SMEs and has helped specialists to develop personalized and better-focused plans of action. [ABSTRACT FROM AUTHOR]

A vast amount of articles centered on brain metastases have been published. To present the 100 most-cited articles dedicated to brain metastasis and to accomplish a broad literature review. In December 2019, we performed a title-focused search using the Thomson Reuters Web of Science database to identify the most cited articles centered on brain metastatic disease. Our search query term was based on using the following algorithm: "brain metastases" OR "brain metastasis" OR "brain metastatic disease" OR "cerebral metastases" OR "cerebral metastasis" OR "cerebral metastatic disease." Afterward, we reviewed the results to certify that they were relevant to the purposes of our research protocol. The 100 most cited papers were chosen and further analyzed. Our search resulted in 11,579 articles, published from 1975 until the completion of our survey. The most cited article, by Patchell et al., was published in 1990, with 1862 citations, and an average of 62.07 citations per year, whereas the last in our list, by Gaspar et al., was published in 2010, with 195 total citations, and an average of 19.50 citations per year. Countries with the highest-cited articles included the United States (75 records), followed by Canada (16 records). We discovered the top 100 most-cited articles centered on brain metastasis, all of which show a potentially increased level of interest, because they are meaningful scientific reports. In addition, we reviewed the historical development and advances in brain metastasis research and relevant points of interest, alongside the relevant contributions of different authors, fields of special interest, and countries. Many of the most cited articles were written by authors whose specialty was not neurosurgery or by neurosurgeons who were supported by colleagues from other medical fields. As a consequence, many of these articles were not published in neurosurgery-dedicated journals. [ABSTRACT FROM AUTHOR]

[Display omitted] • Novel method to estimate total technical potential for improving energy efficiency. • Bottom-up sector energy model used to characterize energy demands and opportunities. • Technology-explicit analysis framework used to estimate integrated energy savings. • Application to Canada's pulp & paper sector indicates major savings are possible. • Technical potential to reduce natural gas use by 95% and net electricity by 54% Industrial energy efficiency has long been recognized as a critical tool for energy management and emissions reduction and is increasingly considered to be an energy resource in its own right. However, the complexity of most industrial sectors creates barriers for modellers, companies, and policymakers in understanding and achieving the overall potential for efficiency-driven energy savings. To address this gap, we have developed a novel method that combines disaggregated bottom-up sector energy modelling with analysis of a comprehensive set of technology-explicit energy efficiency measures. This approach overcomes the deficiencies of top-down analyses and better represents the complexities of multi-measure efficiency investments compared to piecewise studies of individual measures. In this study, we demonstrated application of our method to the case of the Canadian pulp and paper sector. Our analysis shows that the sector can reduce its natural gas and electricity use by 95% and 41%, respectively, by adopting economical efficiency measures. This equates to 71 PJ of natural gas and 44 PJ of electricity saved annually and would result in cost savings of $81 per tonne of output sector-wide. Notably, we find that efficiency and fuel switching have the technical potential to reduce natural gas consumption by 98% across the sector. Taken together, the results provide quantitative evidence that energy efficiency is an underestimated resource for cost-effective energy savings in the Canadian pulp and paper sector. Our analysis framework can be applied to any industrial sector in any region to provide insights regarding energy conservation strategies and policy design. [ABSTRACT FROM AUTHOR]

Abstract Scope Antibiotic stewardship programmes (ASPs) are necessary in hospitals to improve the judicious use of antibiotics. While ASPs require complex change of key behaviours on individual, team organization and policy levels, evidence from the behavioural sciences is underutilized in antibiotic stewardship studies across the world, including high-income countries (HICs). A consensus procedure was performed to propose research priority areas for optimizing effective implementation of ASPs in hospital settings using a behavioural perspective. Methods A workgroup for behavioural approaches to ASPs was convened in response to the fourth call for leading expert network proposals by the Joint Programming Initiative on Antimicrobial Resistance (JPIAMR). Eighteen clinical and academic specialists in antibiotic stewardship, implementation science and behaviour change from four HICs with publicly funded healthcare systems (e.g. Canada, Germany, Norway and the UK) met face-to-face to agree on broad research priority areas using a structured consensus method. Question addressed and recommendations : The consensus process assessing the ten identified research priority areas resulted in recommendations that need urgent scientific interest and funding to optimize effective implementation of ASPs for hospital inpatients in HICs with publicly funded healthcare systems. We suggest and detail behavioural science evidence–guided research efforts in the following areas: (a) comprehensively identifying barriers and facilitators to implementing ASPs and clinical recommendations intended to optimize antibiotic prescribing; (b) identifying actors ('who') and actions ('what needs to be done') of ASPs and clinical teams; (c) synthesizing available evidence to support future research and planning for ASPs; (d) specifying the activities in current ASPs with the purpose of defining a control group for comparison with new initiatives; (e) defining a balanced set of outcomes and measures to evaluate the effects of interventions focused on reducing unnecessary exposure to antibiotics; (f) conducting robust evaluations of ASPs with built-in process evaluations and fidelity assessments; (g) defining and designing ASPs; (h) establishing the evidence base for impact of ASPs on resistance; (i) investigating the role and impact of government and policy contexts on ASPs; and (j) understanding what matters to patients in ASPs in hospitals. Conclusions Assessment, revisions and updates of our priority-setting exercise should be considered at intervals of 2 years. To propose research priority areas in low- and middle-income countries, the methodology reported here could be applied. [ABSTRACT FROM AUTHOR]

Abstract: Canada's commercial seal hunt warrants close examination in that it is the largest kill of marine mammals on earth, it exists for commercial reasons, it targets deep diving seals with unique physical adaptations, and it is conducted in a particularly remote and uncontrolled environment amidst unstable sea ice and extreme weather conditions. For these reasons, commercial sealing in Canada has been the subject of regular veterinary scrutiny for more than five decades. In that time, despite repeated recommendations and some changes to the regulations, considerable evidence continues to be presented during each new season of poor welfare outcomes for seals. To add to the discussion we (Butterworth and Richardson) (2013) [1] reviewed multiple studies on commercial sealing, government reports, trade journal articles and recommendation reports, in an attempt to answer the question of why, despite the efforts of veterinary advisors and government to improve the situation, seals continue to die in inhumane ways. In examining the available evidence, the environment in which commercial sealing occurs, and the physical adaptations of seals, the authors concluded that generally accepted principles of humane slaughter cannot be implemented effectively and consistently in the context of commercial sealing. [Copyright &y& Elsevier]

The article presents a synopsis on comprehensive non-surgical treatment which leads to improved walking ability in people with lumbar spinal stenosis. Topics discussed include dominant symptom of people with lumbar spinal stenosis; marginal differences between treatment groups in other more traditional outcomes; and training program offered to the comprehensive training and motivated patients.

In today's globalized world wood-based products are often imported from countries other than those where the wood was grown. Bilateral trade statistics are thus only of limited help for getting a better understanding of how production-related environmental impacts are caused by consumption elsewhere. This study presents a novel physical accounting model that allows flows of wood-based products to be traced along international supply chains, therefore making it possible to consistently relate the consumption of wood-based products to the origin of roundwood. In comparison to previous studies, the proposed method covers entire supply chains, including finished wood and paper products, such as furniture and printed matter, and also accounts for flows of processing residues and recovered paper. The main results of the accounting model are detailed country-by-country matrices indicating the locations of origin of the products consumed in a given nation. For instance, it is revealed that out of the finished wood products consumed in the USA in 2018, 75.6% originated domestically, 10.7% from neighbouring Canada and the remaining 13.7% from other countries. Potential applications and extensions of the presented approach are also discussed. • The accounting approach traces flows of wood-based products along supply chains. • The method has a high regional resolution and covers 16 different products. • Processing residues, recovered paper and finished products are also accounted for. • Matrices indicate the origin of the raw material contained in consumed products. • The model is useful for investigating the theory of unequal ecological exchange. [ABSTRACT FROM AUTHOR]

Highlights: [•] Evaluation of new HWP accounting method leads to significant GHG emission reduction for Canada. [•] Use of harvested wood for energy and of construction lead to largest GHG savings. [•] A cascade-use for wood and paper products is paramount for further GHG improvement. [•] The end-of-life effect of using recycled waste wood for energy is delayed due to longer carbon uptake. [•] Cradle-to-cradle utilization of wood waste has an underdeveloped reduction potential. [Copyright &y& Elsevier]

A tracking control scheme is proposed for complex dynamic network (CDN), where the CDN is regarded wholly as a dynamic composite system which consists of two mutually coupled subsystems. One subsystem consists of all nodes and the other consists of all links, and consider the weights of the links to be state variables in the latter subsystem. There are two parts in the structure of the proposed tracking control scheme: the designed controller of nodes and the synthesis of the coupling term in links. These two parts can guarantee two subsystems to asymptotically track the given reference targets, respectively. This approach originates from the communication transmission network (CTN). In CTN, for the network optimization management, the reference network topology (NT), such as the star topology, is required as a target for tracking in communication transmission (links) when each node in network needs to track its own target. The control scheme provided of this paper coincides with above requirement. And finally, a comparative simulation example is given for illustrating the effectiveness of the provided control scheme. • The dynamic equations of nodes and NT are represented by the matrix differential equations, this can contain many models in other papers and simplify the control scheme, which is rarely discussed. • The tracking targets of nodes and NT given in this paper are independent of each other, which is novel. • When all nodes track the reference targets, the eventual network layout is shown by the desired NT, which is novel. [ABSTRACT FROM AUTHOR]

Abstract: The Sydney Steel Plant emitted toxic pollutants into the local area for almost 100 years. Although no paper record exists of the amount and spatial variability of the pollutants emitted, a natural record exists locked in the annual growth of native tree species in the region. Studies have shown that temperate trees can incorporate local metal pollution into their annual rings, creating a temporal and spatial record of the pollution. Two abundant species were sampled within a 5-km radius of the steel plant site. Using dendrochronology, atomic absorption spectroscopy (AAS) and energy dispersive X-ray fluorescence (EDXRF) on white birch, Betula papyrifera, and eastern larch, Larix laricina, a new methodology was developed to determine levels of pollutants in a given year. Atomic absorption spectroscopy did not produce accurate results with the small sample sizes we were able to process, but energy dispersive X-ray fluorescence determined that the hardwood birch better incorporated both lead and zinc into annual rings than the softwood larch. The technique provides an interesting area for further study, because it provides a time efficient and repeatable method of analyzing chemicals stored in wood tissue. [Copyright &y& Elsevier]

On-demand transit (ODT) has been widely piloted in recent years by many transit agencies in response to changing travel behaviour and preferences among people. Some agencies have adopted ODT to replace underperforming bus routes, as part of a continuous service planning process while others incorporated it within network re-design. All these trends highlight the critical need for transit agencies to have guidance for incorporating ODT into transit network planning both at the strategic, tactical, and service planning levels. Thus, the purpose of this research is to provide a discussion of the key guiding principles to facilitate the development of transit networks with integrated on-demand and scheduled services. To achieve this goal, a thorough review of the states of practice and research was conducted. Findings from the practice review were also reinforced through ODT practitioners' engagement in Canada. This paper provides discussions on the service goals and objectives of an integrated network design and highlights the key planning requirements for developing integrated networks. At the service planning level, the paper provides a discussion on service goals, service design parameters, and scenario development of ODT service. • On-demand transit (ODT) have grown in many cities around the globe, mostly as pilot projects. • Review of the literature and practice shows that planning for ODT is based on best practices , without "built" guidelines. • Principles of planning are discussed within two applications, the network design level, and the service planning level. • Opportunities of integration and mode selection criteria are defined to integrated ODT with existing bus network. • Simulation and analytical tools are useful to complement the principles of planning in the decision-making processes. [ABSTRACT FROM AUTHOR]

Abstract: Hemlock looper (Lambdina fiscellaria fiscellaria (Guen.)) is an economically damaging defoliator that undergoes periodic outbreaks in Newfoundland, Canada. It defoliates and causes extensive tree mortality to its primary host, balsam fir (Abies balsamea [L.] Mill.). We quantified tree survival using data from permanent sample plots (PSPs) and growth reduction or release using dendrochronology, and related these impacts to defoliation severity determined from annual aerial defoliation survey data. Such impact relationships are necessary as a fundamental input to a Decision Support System. Growth and survival of balsam fir, black spruce (Picea mariana (Mill.) B.S.P.) and white birch (Betula papyrifera Marsh.) were assessed from 1996 to 2008 in 48 Newfoundland Forest Service PSPs, selected based on four classes of defoliation severity. Two years of severe (71–100%) defoliation resulted in almost complete mortality for balsam fir, 10 years after defoliation, whereas survival was 70–80% for black spruce and white birch. Lower defoliation severity (1–2 years of moderate (31–70%) or 1 year of severe) resulted in approximately 60% survival for balsam fir and no reduction in survival for black spruce and white birch. Maximum growth reduction of balsam fir was 10–15% with 1 year of moderate-severe defoliation, 35–40% with 2 years of moderate defoliation, and about 50% with 2 years of severe defoliation. Growth recovered to pre-defoliation rates 5 years after defoliation ceased in all severity classes. Growth reduction and recovery of black spruce were more variable and lower than for balsam fir, and white birch exhibited only minor (<10%) growth reduction during the defoliation year or 1 year after defoliation. Control measures should focus on avoiding severe defoliation for two consecutive years. [Copyright &y& Elsevier]

Abstract: Postfire tree species compositions are predicted to be the same prior to fire according to the direct regeneration hypothesis (DRH). We studied 94 upland boreal forest stands between 5 and 18 years after fire in Ontario, Canada. Postfire species-specific regeneration density was positively related to prefire stand basal area for Pinus banksiana, Populus spp., Betula papyrifera and Picea mariana, but not for Picea glauca and Abies balsamea. In addition, seedling density of Populus spp., B. papyrifera, P. mariana, P. glauca and A. balsamea were positively affected by build up index and, except Populus spp., their density increased with age of burn. To facilitate testing the DRH, we introduced a term called compositional difference (CD) that is the difference in a species relative percentage between the postfire and prefire stand. The testable null hypothesis is CD=0 for a given species. CD was not different from 0 for P. banksiana, was 19.8% for Populus spp., 10.4% for B. papyrifera, −17.9% for P. mariana, −14.6% for P. glauca, and −14.9% for A. balsamea, indicating fire increases broadleaves at the expenses of mid- and late-successional coniferous species. Compositional increases of Populus spp. and B. papyrifera in postfire stands occurred mostly where these species were a minor component prior to fire. In conclusion, the DRH was supported by the specific positive relationships between postfire regeneration densities and prefire basal area for P. banksiana, Populus spp., B. papyrifera and P. mariana. However, if the DRH is used for predicting postfire composition, P. banksiana is the only species that had the same composition between postfire and prefire stands. Nevertheless, CD for P. banksiana was negatively related to its prefire composition. Similarly, CD for other species was negatively related to their prefire compositions with varying effects of build up index and age of burn. Our results suggest, if fire occurrences increase with global change, the boreal landscape will be more dominated by hardwoods and mixtures of conifers and hardwoods. [Copyright &y& Elsevier]

Economic freedom is generally associated with higher average income levels, but does it benefit the very poor as well? Does it help them to escape their disadvantaged position? Does it reduce the probability of falling into low-income status? This paper deals with those questions using longitudinal data from Canada regarding the duration of low income spells, as well as entries and exits from low-income status from 1992 to 2020. Aggregated at the provincial level and inside a panel regression approach, these different indicators of low-income status are negatively related (i.e., less poverty) with the Fraser Institute's Economic Freedom of North America (EFNA) index. [ABSTRACT FROM AUTHOR]

This paper examines whether a forced displacement of an ethnic group can lead to long-run changes to their spatial distribution and whether this shock can also lead to changes in where new migrants settle. I use the Canadian government's internment of Japanese Canadians during World War II, as well as their post-war forced resettlement, as a natural experiment. I find that the policy led to dramatic resettlement patterns; areas where Japanese Canadians were removed from had far fewer Japanese Canadians after World War II, with this effect persisting for decades. Despite these displacement patterns, I find that both the pre-war and post-war settlement patterns drive where new Japanese migrants settle within Canada, suggesting that the disruption of the connections and networks formed by Japanese migrants before World War II were not fully dismantled by the Canadian government's wartime policies. Reinforcing this mechanism, I show using Facebook's social connectedness data that Japanese population shares from both 1931 and 1951 predict whether a Canadian Census Division is more socially connected with Japan today. The results from this paper show that, despite Canada's forced dispersal of its Japanese population across the country, networks and forces that connect Census Divisions to Japan and draw in new migrants continued to persist. [ABSTRACT FROM AUTHOR]

For the complex dynamical network (CDN) with uncertainties, this paper defines the links synchronization and synthesizes the adaptive control scheme to realize it. Generally speaking, a CDN can be considered as the composition system with the two coupled dynamic subsystems: the nodes subsystem (NS) and the links subsystem (LS). We observed that there are many results in the existing literature on the NS synchronization, which implies that the state at each node tends to be the same when the NS synchronization happens. However, the LS synchronization is rarely discussed in the existing literature due to its unknown meaning and engineering practice background. Inspired by the ego-networks, this paper employs the time-varying outgoing links at each node to geometrically describe the changing of network topologic structure and regards the values-weighted of outgoing links as the state variables of LS, by which the LS synchronization is introduced, the corresponding control scheme for its implementation is synthesized under the condition that the state of NS is available and the state of LS is unavailable. The control scheme includes the adaptive controller for NS and the coupling strategy for LS. Finally, the effectiveness of proposed control scheme in this paper is verified by a numerical example. [ABSTRACT FROM AUTHOR]

Methadone has several unique characteristics that make it an attractive option for pain relief in serious illness, but the safety of methadone has been called into question after reports of a disproportionate increase in opioid-induced deaths in recent years. The American Pain Society, College on Problems of Drug Dependence, and the Heart Rhythm Society collaborated to issue guidelines on best practices to maximize methadone safety and efficacy, but guidelines for the end-of-life scenario have not yet been developed. A panel of 15 interprofessional hospice and palliative care experts from the U.S. and Canada convened in February 2015 to evaluate the American Pain Society methadone recommendations for applicability in the hospice and palliative care setting. The goal was to develop guidelines for safe and effective management of methadone therapy in hospice and palliative care. This article represents the consensus opinion of the hospice and palliative care experts for methadone use at end of life, including guidance on appropriate candidates for methadone, detail in dosing, titration, and monitoring of patients' response to methadone therapy. [ABSTRACT FROM AUTHOR]

This paper examines Indigenous perspectives on energy sustainabilities. We as Indigenous Elders and non-Indigenous scholars collectively explore how pipeline leaks that cost several Indigenous communities of the Treaty 6 region (known as western Canada). While the pipeline project has brought income to some, and wealth to the few, its impact on the environment and on the lives of many Indigenous groups is profoundly concerning. Indigenous communities are particularly vulnerable to pipeline leaks, yet have limited capacity to mitigate them as compared to larger urban centers. Using an Indigenist research framework, we used deep listening, traditional stories, reflective journals, cultural camps, and collective stories. We followed traditional protocols, continuous forms of consent, respect, and honour Indigenous Elders and Knowledge-keepers' stories. We learned about community Elders, Knowledge-keepers, and leaders' suggestions on how strategic decisions need to be made about pipeline leaks management and energy sustainabilities. The purpose of this paper is to provide Indigenous communities, particularly those communities of western Canada, with new community-led guidelines that can help them make strategic choices about pipeline leaks management to enhance their resiliency to energy. In this paper, we highlighted community suggestions on how to flip the traditional approach of fitting Indigenous ways of knowing into the Canadian legal structures by starting with Indigenous ways of knowing about the relationships of Indigenous people with land, water, and energy together with the impacts of the energy. We hope this paper may assist policy makers and Indigenous communities in sustainable energy policy development and provide a structured, transparent, and participatory decision support tool to government and communities to guide future energy management planning initiatives. • Identify community-led consultation practices for energy management. • Develop a community-led energy resiliency guideline. • Create risk evaluation framework for addressing pipeline leaks and energy management. • Explore community-led solutions anchored in sustainable energy management politics. • Support Indigenous communities' and organizations' attempts to negotiate. [ABSTRACT FROM AUTHOR]

Many travel surveys used in transportation planning still collect information over a single weekday while mobility and activity patterns fluctuate from day to day. However, the emergence of new continuous data sources has led to the generation of large amounts of longitudinal data. Therefore, this paper aims to value these two data types to cross-analyze the temporal variability of aggregated travel behaviors. A weighting method based on large-scale single-day survey samples was first developed to extend the representativeness of the daily trip diaries available in the three most recent Origin-Destination household travel surveys of Montreal, Canada, to the entire data collection period (four months in the fall). This method was then validated using passive data streams (smart card and count data) for three modes: car, subway, and bicycle. The variations in the daily use of these modes measured independently by the surveys and passive data were compared over several months of the fall period and throughout an average week. Indicators were also proposed to evaluate whether the two data sources capture the same trend and seasonality, especially the weekly rhythms. The results show that it is possible to accurately infer day-to-day variability in travel behavior from a large-scale cross-sectional single-day survey. Furthermore, this paper demonstrates the potential for complementarity between traditional surveys and emerging data (at least over the survey period), as well as the possibility to combine them since there are large similarities in the aggregated travel patterns they allow monitoring. [ABSTRACT FROM AUTHOR]

Direct air capture of carbon dioxide (CO 2) is technically a feasible solution for reducing atmospheric CO 2 concentrations at scale, building on decades of global research. However, powering such systems even partially with CO 2 -intensive fossil fuels results in more CO 2 emissions. This paper presents a novel energy management strategy (EMS) to further explore modular offshore wind energy off Canada's West Coast via power-to-direct air capture and power-to-gas systems. The system architecture includes a 15 MW wind turbine paired with a hydrogen energy storage system, i.e. hydrogen production and storage, and direct air capture (DAC) units. Hydrogen production from wind generation is stored and used to offer two key benefits: to deliver the thermal loads of the DAC system, and to meet hydrogen demand for external consumers. The proposed EMS offers an extra degree of freedom to operate the designed system by setting the priority either to maximize the amount of CO 2 capture or to maximize the amount of H 2 production for external consumers. In particular, the study incorporates dynamic mathematical modeling and constraints formulation for the aforementioned scenarios; DAC priority for CO 2 capture and H 2 for external hydrogen demand satisfaction. The effectiveness of the proposed EMS is shown through extensive simulations with different seasonal conditions. • Detailed mathematical dynamical models for offshore power-to-DAC and power-to-gas systems. • Green hydrogen production for two-fold benefits; H 2 for meeting DAC thermal loads, and H 2 as fuel for external consumers. • Scenario 1 prioritize the CO 2 capture rate, while scenario 2 maximizes the H 2 production for external consumers. • Design of EMS shows the correct unit commitment of the CO 2 capture rate and H 2 tracking. [ABSTRACT FROM AUTHOR]

While Canada has had relatively high vaccination rates against COVID-19, specifically during earlier waves of the pandemic, vaccine hesitancy has continued to serve as a significant barrier to adequate protection against the virus and, more recently, booster vaccine uptake. This paper explores the processes underlying Canadians' perceptions of COVID-19 vaccines and their decisions to take or refuse them, as well as how public policy and health messaging about vaccination has influenced vaccination attitudes and behaviors. Our focus group interviews with 18 vaccinated and unvaccinated adult Canadians conducted during October 2021 reveal that, in some respects, COVID-19 vaccine hesitancy conforms to prior knowledge about some of the factors that affect vaccine attitudes (e.g., the influence of known medical providers) but deviates from current theoretical frameworks regarding general vaccine hesitancy. Specifically, these frameworks emphasize a lack of scientific knowledge and literacy ("knowledge deficit" accounts) or individuals' inability to incorporate rational risk perceptions into initial emotional responses to vaccines ("emotionality/irrationality" accounts). In contrast to the knowledge deficit account, we find that expressions of COVID-19 vaccine hesitancy were most frequently associated with an information surplus or inability to prioritize information from multiple and often contradictory sources. Furthermore, top-down pro-vaccination messaging often triggered significant pushback against what participants perceived as moral shaming of the unvaccinated. Our findings demonstrate the necessity for a new framework to understand and address vaccine hesitancy. A better theoretical account of vaccine hesitancy has important implications for future vaccination efforts, specifically within the context of new variants and low booster vaccination rates in Canada. [ABSTRACT FROM AUTHOR]

• 43 % of WHO member states have school vaccine mandates, but policy details vary. • Some mandates have begun to include education components for non-vaccinating parents/guardians. • Currently, education components are used only in Canada and the U.S.; most are online modules. • Evidence suggests in-person counseling is associated with decreased non-medical exemptions. • Additional research, especially on online module education components, is required. School vaccine mandates (SVMs) are population health interventions that require monitoring and communicating about vaccination of school-aged children, with an aim of controlling infectious disease outbreaks. While 43 % of World Health Organization member states report having some sort of SVM, their details vary. A newer element of some SVMs is an "education component" requiring compulsory information, education, or counseling of parents/guardians who decline to vaccinate their children for non-medical reasons. This environmental scan sought, mapped, and synthesized evidence on the existence, format, and impacts of education components of SVMs in 18 affluent Organization for Economic Co-operation and Development comparator countries. We found current SVMs in nine of the 18 comparator countries, but education components to those SVMs only in Canada (n = 2) and the U.S. (n = 9), where such policies were made at the provincial/state level. The earliest was implemented in 2011 and most recent has not yet been implemented. Education components were used as requirements for obtaining non-medical exemptions from SVMs, and involved either an informational paper to be read and signed, a counseling or information session from a health professional (public health worker or licensed provider such as family doctor), or an online module to be completed. Peer-reviewed research on in-person sessions suggests association with at least short-term increased vaccine uptake and reduction of non-medical exemptions. Available data on online module education components suggests similar impacts, but research to date is limited. SVMs with educational components are uncommon but have been increasing since 2011. The details of these education components vary, although topics covered in online modules are relatively consistent. Evidence to date suggests at least short-term reduction in non-medical exemptions associated with implementation of SVM education components, but additional research is required to follow-up and confirm, especially as regards online education modules. [ABSTRACT FROM AUTHOR]

• The COVID-19 pandemic has challenged traditional vaccine guidance infrastructure. • NACI made many strategic adaptations to facilitate timely vaccine advice in Canada. • The pandemic highlighted critical roles for NITAGs in vaccine program design. • Learning from COVID-19 pandemic adaptations, we see a roadmap for future pandemics. The COVID-19 pandemic has challenged traditional vaccine guidance infrastructure and frameworks, and added urgency and complexity to the operation of National Immunization Technical Advisory Groups (NITAGs). Canada's National Advisory Committee on Immunization (NACI) provides immunization guidance to the Public Health Agency of Canada (PHAC) who publicly shares expert and evidence-informed guidance with Canadian provinces and territories. Throughout the pandemic, NACI and PHAC implemented many adaptations to meet urgent needs for pandemic vaccine guidance. In this paper, we describe: structural adaptations in response to the accelerated pace and amount of work required to issue recommendations that were timed around product authorizations and dynamic epidemiology; technical adaptations in response to rapidly evolving evidence of variable quality which required close monitoring, and which promoted reliance on basic vaccine principles due to incomplete direct evidence; the need to provide nimble advice (e.g., off-label recommendations, preferential recommendations); communications adaptations (e.g. identify sustainable spokespeople for the committee, receive stakeholder feedback, and ensure urgent nuanced advice was communicated to a diverse audience); and research adaptations focussing on solutions to constrained supply (e.g. prioritisation, extended intervals, and heterologous schedules). The early pandemic vaccine experience has created a roadmap of lessons and adaptations that should be leveraged in future pandemic vaccine programs, and has highlighted the essential role of NITAGs to complement regulatory structures during pandemics to ensure timely, impactful, and evidence-informed public health vaccine guidance. [ABSTRACT FROM AUTHOR]

This paper uses a network approach to study the relationship between trade agreements and trade flows. For the first time in the literature, hypergraphs are used to capture the topology of trade agreements, while the usual graphs are used to represent trade flows. For our analysis, we focused on a snapshot of data from July 2017, before CETA as an agreement in force only in September 2017. An analysis of modularity conducted on both the trade agreements and the trade flows shows an imperfect correspondence between the communities of countries found within the two networks. Although the motivations of Brexit were multiple and, for the most part, far from commercial concerns, Brexit appears as a way to reconcile the networks of flows and agreements. On the other hand, Canada already belonged to the European cluster of trade agreements before the CETA agreement, which therefore appears only as an ex post confirmation of an existing situation. [ABSTRACT FROM AUTHOR]

The performance of constant false alarm rate (CFAR) detectors is often severely degraded in clutter edge and under multiple target interference. CFAR detection in the above environments often uses generalised likelihood ratio method or mean ratio method to find out the clutter edge demarcation line and suppress the sharp increase of false alarm rate, or remove the interference and modify the threshold factor to suppress the interference and improve the detection performance, but this sacrifices the detection gain from the number of clutter samples. In this paper, the feature information is fused to construct feature vectors, and the edge location is judged by the modulus of the cross product of the feature vector pair (MCPFVP), this edge demarcation line detection method fusing with features can be implemented without the need of clutter statistical distribution information. In addition, this paper reconstructs the sea clutter masked by multiple target interference by fusing the sea clutter amplitude correlation information, and these reconstructed sea clutter samples are used for power estimation together with the unmasked sea clutter without changing the threshold factor. This method can not only suppress the target masking effect of multiple target interference as the censoring type CFAR detector, but also maintain the detection gain from the number of clutter samples, which is not possible with the traditional censoring type CFAR detector. In addition, the relative weighted ratio summation (RWRS) is proposed to detect the multiple target interference, which takes into account the asymmetry of the shape of the statistical distribution. Both simulated and real sea clutter data are used to validate the above methods. The measured data are obtained from radar data collected at Yantai Yangma Island, China, Darmouth, Canada and Grimsby, Canada. (The latter two datasets are collected by the IPIX radar - Ice Multiparameter Imaging X-Band Radar). [ABSTRACT FROM AUTHOR]

Reinforced concrete is a commonly used material for constructing basements in low-rise buildings or residential houses in Canada, and as the use of cross-laminated timber (CLT) advances, the door to think of an alternative basement material to offset greenhouse gas emissions associated with reinforced concrete is open. However, the evaluation of CLT durability in below-grade environments, specifically concerning moisture and mould development, remains an unexplored field in research. Hence, this paper aims to analyze CLT's moisture response and mould growth risk in below-grade environments using field and laboratory experiments. A laboratory experiment was carried out to test a waterproofing membrane solution selected to compose the wall assembly in the field experiment. A large-scale experimental CLT basement was built at a cohesive soil site in Edmonton, Canada. The field experiment involved monitoring the relative humidity, temperature, and soil volumetric water content of the CLT panels, which measure 3 m by 6 m in plan and 2 m deep. Data was collected for an extended period from June 2022 to July 2023. The VVT model, developed by Hukka and Viitanen (1999) and updated by Viitanen et al., 2011 to estimate the mould growth level, was used to predict the risk of mould growth. The laboratory experiment showed that the waterproofing membrane is suitable for protection against moisture in a still-water setup. Field experiment results suggested that the primary moisture source was below the basement floor when the floor was finished inadequately. The moisture content of CLT walls was significantly increased by floor flooding and decreased by heating the basement interior. The acceptable mould index of three was surpassed during periods of abundant water below the basement floor due to flood events, showing that the CLT panels were at risk of mould growth development. • CLT use inbasements is in research stage. This paper contains insights for developing future research on this subject. • CLT in basement construction requires robust envelope with waterproofing membranes that perform well below grade. • Elevated moisture levels could pose structural and biological risks to the CLT basement and its occupants. • CLT basement walls take time to dry, and during this period, the walls may be exposed to risky levels of mould growth. [ABSTRACT FROM AUTHOR]

The pulp and paper industry use biomass residues, such as paper sludge and bark as fuel to provide energy for their plants. However, issues such as high-water content or low heating value limit the amount of energy that can be utilized. Processes to improve heat generation include biomass densification, which facilitates transportation and handling and can increase energy yield. However, the technical feasibility of briquetting is a function of the feedstock and preprocessing. This study introduces a novel approach to briquette production from biomass residues by utilizing wet biomass with water as a natural binder, contrasting with conventional methods that require forced drying and/or the addition of binders. The objective of this research was to investigate the impact of briquetting both unprocessed biomass and post-hydrothermal carbonization. The study focused on manufacturing briquettes derived from different sources, including bark (Balsam fir), paper sludge, and hydrochar of paper sludge. The feedstock was characterized for ash content and higher heating value. Biomass particle size (range), moisture content (range), process temperature (range), process pressure (range), and process residence time (range) were varied in briquetting experiments to determine conditions to produce high-quality briquettes with minimal energy input. Moisture content as high a 50 wt% in feedstock produced technically feasible briquettes, with appropriate physical-mechanical properties (durability, volumetric expansion and apparent density), and energetic potential (calorific value). The addition of heat (pressing temperature of 150 °C) during the pressing process resulted in briquettes with enhanced physical-mechanical, and energetic properties, surpassing those produced at room temperature. Further tests with additional steps in the production process are required to meet commercialization standards in Canada, but the treatments conducted in this study effectively improved the energy potential of biomass for internal industrial energy gains. • Wet briquettes (20 wt% and 50 wt%) production was technically feasible. • Briquettes with added heat (150 °C) exhibited superior properties. • All biomass briquettes exhibited improved energy potential. • Hydrochar briquettes showed superior energy content and durability. [ABSTRACT FROM AUTHOR]

Most people accused of a crime are released into the community pending the resolution of their charges. To manage perceived risk, conditions of release on bail modify and control behaviour while providing a mechanism and justification for state monitoring. Drawing on 120 interviews with accused people in Canada this paper develops a typology to theorize how bail is experienced by accused, providing a framework for understanding what motivates accused to comply or violate their bail conditions and what impact conditioning has on their lives. Our analysis reveals insights into how accused present themselves to the court, navigate conditions of release and evaluate being conditioned in the community under the threat of further criminalization. Consistent with Yule et al. (2023), accused report a complex, variegated experience of social control in the community prior to conviction. Insights from participants suggest that bail is part of a broader criminal court process, that differentiates and marks accused (Kohler-Hausmann, 2018) who lack the requisite docility and discipline as risky and requiring more intensive conditioning and monitoring. • Drawing on 120 interviews with accused people in Canada this paper develops a typology to theorize how bail is experienced by accused, providing a framework for understanding what motivates accused to comply or violate their bail conditions and what impact conditioning has on their lives. • Accused report a complex, variegated experience of social control in the community prior to conviction. • How accused respond to being conditioned and demonstrate their amenability determines if and how much more (if any) conditioning and sanctioning is needed. • Reflecting on their presentation of self, experiences in the pre-trial process and impressions of the system, participants speak to themes of docility and discipline, bail as punishment and release as being better than detention. • The bail process is punishment's testing ground. Bail is part of a broader criminal court process, that differentiates, and marks accused (Kohler-Hausmann, 2018) who lack the requisite docility and discipline as risky and requiring more intensive conditioning and monitoring. • The lived experiences of accused reveals that bail conditions are ineffective tools of behaviour management, control, or change. [ABSTRACT FROM AUTHOR]

• Many mental health disorders first emerge during early childhood or adolescence. • Wait times for children's mental health services have been an international and widespread problem. • Long wait times prolong the emotional distress of children and/or adolescents and their caregivers which can exacerbate mental health difficulties. • The majority of research in this area has been conducted in the United Kingdom and Canada and focus on one waitlist strategy. • Common strategies include alternative service delivery models, increasing system capacity, and improving intake and assessment processes. Background: Although many mental health disorders first emerge during early childhood or adolescence, there is a significant gap between demand and availability of mental health resources, leading to long waitlists for services. Objective: The objective of this scoping review was to identify and characterize the research literature related to the range of waitlist management strategies that have been implemented in outpatient child and adolescent mental health care. Methods: Electronic databases reviewed included: Medline (Ovid), Embase (Ovid), PubMed, PsychINFO, SCOPUS, CINAHL, and ISI Web of Science. Grey literature databases included: OpenGrey, Conference Papers Index, and Proquest Digital Dissertations. Articles were screened by two reviewers in two steps: first by title and abstract, then full text level. Data were extracted using an a-priori developed data extraction framework, which was piloted and modified iteratively. Results: A total of 119 papers related to waitlist interventions in child and adolescent mental health were reviewed. Of these 119 papers, 11% were reviews, summary, or theoretical papers; 8% used a randomized control trial design and 2.5% were trial protocols. Most studies used less rigorous designs, such as uncontrolled before-and- after designs. The large majority focused on just one waitlist strategy each. The most commonly used approaches included: prioritization/triage and initial assessment; brief consultation and advice or brief therapy approaches; group-based models; interim services; increasing capacity; and strategies to decrease non-attendance. Most studies were conducted in the United Kingdom or Canada. Discussion: While mental health systems are complex, most studies examining waitlist initiatives explored the implementation of single initiatives. It is unlikely that a single waitlist strategy can be effective in managing wait times for children's mental health. Rather, consistent and systemic approaches to address wait times that consider the impact of the reduction approach on the patient, the program, and the community are needed. [ABSTRACT FROM AUTHOR]

• A model was created to examine the reliability of maintenance budget allocation. • The model was applied to network-level pavement maintenance in Canada. • The impacts of algorithm selection and parameter tuning were studied. • The significance of pavement clustering in increasing reliability was highlighted. • The importance of incorporating actual pavement improvement curves was clarified. The purpose of this paper is to increase the reliability of the network-level pavement maintenance budget allocation by reducing uncertainties of algorithm selection and parameter tuning. In this paper, reliability is defined as the ability of a network-level pavement maintenance plan to improve the condition of a pavement network within a certain budget. In order to quantify reliability, the reliability index is defined as the ratio between the post-maintenance network condition and the net maintenance cost. With this purpose in mind, a two-objective optimization model was developed. To test its applicability, the model was applied to a pavement network in Canada. The model was solved using the Non-Dominated Sorting Genetic Algorithm II and the differential evolution algorithms. Finally, the reliability indices of algorithms and termination criteria were computed. The results indicated that the differential evolution algorithm recommended less frequent but more intense interventions that made the solutions expensive and less reliable. This paper contributed to the network-level pavement maintenance body of knowledge by (1) developing a multi-objective optimization model to reduce uncertainties of parameter tuning and algorithm selection; (2) increasing the reliability of budget allocation; (3) showcasing the significance of pavement clustering in increasing reliability; and (4) developing and incorporating actual pavement improvement curves. [Display omitted] [ABSTRACT FROM AUTHOR]

• The paper proposes accurate and representative multi-output regression method. • The method is based on polygon generation and deep generative modeling. • It learns the true distribution of complex industrial data. • The method expresses all interrelationships between data inputs and outputs (KPIs). • It is tested for KPIs' prediction using data collected from an industrial plant. This paper proposes an innovative multi-output regression method that processes and converts the numeric data variables into representative images (polygons) to build accurate predictive models in industrial applications with several dependent variables (responses). In this method, polygon images are generated from both the inputs and outputs of numeric data. The images representing the data inputs are then translated into those representing the outputs by training a conditional generative adversarial network (cGAN). The output images of the trained cGAN are then mapped into the outputs to get back the predicted numeric values. The advantage of the proposed method is that it makes use of the breakthrough of deep generative modeling to learn the true distribution of complex data, which is difficult to determine in many industrial applications. This is attributed to the fact that the generated polygons express all interrelationships between the data variables in the form of trustworthy representational images used to train the cGAN model. The performance of the proposed method was validated successfully using a complex industrial dataset acquired from a black liquor recovery boiler (BLRB) in a Kraft pulp & paper mill located in Canada. Three key performance indicators (KPIs), one economic and two environmental, are used as regression outputs in the BLRB dataset. The results of the proposed method demonstrate better performance than other comparable machine learning regression methods. [ABSTRACT FROM AUTHOR]

High performance of HVAC connected Building Integrated Photovoltaic/Thermal (BIPV/T) systems relies on appropriate control. However, optimal control is often overlooked, resulting in systems that operate inefficiently. This paper investigates how model predictive control (MPC) can improve the operation of open loop air-based BIPV/T systems connected to multiple thermal applications. The BIPV/T system at the first institutional net-zero energy building in Canada, the Varennes library, is used as an archetype. The BIPV/T covers 16% of the south-facing roof and operates under a simple rule-based control strategy. The developed control and design strategies consider variations of this system, to achieve higher thermal utilization efficiency. A control-oriented BIPV/T model is developed and calibrated using monitored data. The BIPV/T airflow is regulated through MPC for simultaneous heat supply to an Energy Recovery Ventilator and air-to-water heat pump. The BIPV/T air flow is efficiently controlled, considering the connected thermal applications, environmental conditions, and PV temperature. Model-based control for BIPV/T systems can increase the amount of useful heat and reduce PV overheating. The MPC controller for the examined system reduced the building energy consumption compared to the business-as-usual operation by 40% and together with increased BIPV/T area can supply excess heat to adjacent buildings. [ABSTRACT FROM AUTHOR]

In Canada, public insurance for physician and hospital services, without cost-sharing, is provided to all residents. Outpatient prescription drug coverage, however, is provided through a patchwork system of public and private plans, often with substantial cost-sharing, which leaves many underinsured or uninsured. We conducted a systematic review to examine the association of drug insurance and cost-sharing with drug use, health services use, and health in Canada. We searched 4 electronic databases, 2 grey literature databases, 5 specialty journals, and 2 working paper repositories. At least 2 reviewers independently screened articles for inclusion, extracted characteristics, and assessed risk of bias. The expansion of drug insurance was associated with increases in drug use, individuals who reported drug insurance generally reported higher drug use, and increases in and higher levels of drug cost-sharing were associated with lower drug use. Although a number of studies found statistically significant associations between drug insurance or cost-sharing and health services use, the magnitudes of these associations were generally fairly small. Among 5 studies that examined the association of drug insurance and cost-sharing with health outcomes, 1 found a statistically significant and clinically meaningful association. We did not find that socioeconomic status or sex were effect modifiers; there was some evidence that health modified the association between drug insurance and cost-sharing and drug use. Increased cost-sharing is likely to reduce drug use. Universal pharmacare without cost-sharing may reduce inequities because it would likely increase drug use among lower-income populations relative to higher-income populations. • There is a gap in the literature pertaining to the effects of drug insurance and cost-sharing in a Canadian context. • We conducted a systematic review of Canadian studies and found that there was consistent evidence that the expansion of drug insurance was associated with meaningful increases in drug use, that individuals who reported drug insurance coverage generally reported higher drug use relative to those who reported no coverage, and that increases in and higher levels of drug cost-sharing were associated with lower use. • Universal pharmacare without cost-sharing may reduce inequities in access to essential drugs. [ABSTRACT FROM AUTHOR]

The paper presents in-depth three-dimensional finite element analyses investigating geosynthetic-reinforced soil walls with turning corners. Validation of the 3D numerical procedure was first performed via comparisons between the simulated and reported results of a benchmark physical modeling built at the Royal Military College of Canada. GRS walls with corners of 90°, 105°, 120°, 135°, 150°, and 180° were simulated adopting the National Concrete Masonry Association guidelines. The behaviors of the GRS walls with corners, including the lateral facing displacement, maximum reinforcement load, factor of safety, potential failure surface, vertical separation of facing blocks, and types of corners were carefully evaluated. Our comprehensive results show (i) minimum lateral displacement occurs at the corner; (ii) lower strength of reinforcements are required at the corner; (iii) higher corner angles lead to lower stability; (iv) potential failure surface forms earlier at the end walls; (v) deeper potential failure surfaces are found at the corners; (vi) larger numbers of vertical separations are found at walls with smaller corner angles. The paper highlighted the salient influence of the corners on the behaviors of GRS walls and indicated that a 3D analysis could reflect the required reinforcement length and the irregular formation of the potential failure surfaces. • The minimum lateral displacement always occurred at the turning corner. The larger the corner angle, the smaller the deformation difference throughout the sections of the GRS walls. • Less strength of reinforcement was required in the corner than to the end walls, and the required strength of the reinforcement increased with increasing turning corner angle. • The smaller the corner angle, the higher the FOS, suggesting that a conventional 2D (plane-strain) analysis may underrepresent the existence of the corners. • Reflected by the 3D analyses, the potential failure surface grew deeper near the turning corner, indicating that a longer required length of reinforcement should be adopted at the corner. • The effects of the turning corner, in terms of lateral facing displacement, maximum reinforcement load, FOS, potential failure surface, and vertical separation of facing blocks, were less significant at larger angles. [ABSTRACT FROM AUTHOR]

Motivated by large oil price swings, high economic and geopolitical uncertainties, and the financialization of oil, this paper examines the frequency spillovers and co-movements between oil shocks (risk and demand) and the stock markets of top oil-producer and consumer countries, namely, Canada, China, Russia, Saudi Arabia, and the US. The analysis uses the time-domain spillover index of [1], the frequency-domain spillover of [2]; and the wavelet coherence approach. The findings reveal that spillovers run from the U.S., Canada, and, to a lesser extent, Russia to oil shocks. On the other hand, oil shocks, Saudi Arabia, and China constitute net receivers of shocks. The intensity of spillovers is heavier in the short-term frequency than in the intermediate- and long-term. Furthermore, the direction of spillovers is more defined in the long-term. The U.S. stock market exerts a strong impact on oil risk in general, but the impact is stronger in the short-term. Conversely, an oil demand shock is susceptible to innovations from Canada and Russia that are stronger in the long-term. This means that oil risk shock stemming from innovations in financial markets is short-lived and dissipates quickly due to quick reactions from market participants. On the contrary, long-term links characterize the relationship between oil demand shock and financial markets, mirroring the macroeconomic nature of the linkages. Finally, while the 2008 crisis, EDC, oil price crash, and the COVID-19 pandemic coincided with strong spillovers in the short-term, the COVID-19 era was marked by higher spillovers in the long term. The findings provide important information for investors and policymakers in terms of diversification, risk management, and efforts to mitigate contagion. • This paper examines the frequency spillovers and co-movements between oil shocks and the stock markets. • We use the time-frequency spillover index method and the wavelet coherence approach. • Spillovers run from the U.S., Canada, and, to a lesser extent, Russia to oil shocks. • Oil shocks, Saudi Arabia, and China constitute net receivers of shocks. • The intensity of spillovers is heavier in the short-term frequency than in the intermediate- and long-term. [ABSTRACT FROM AUTHOR]

Extensive research exists on the potential impacts of foresight; however, a comprehensive understanding of the factors that lead to foresight impact, particularly in influencing senior management decisions, is relatively sparse. This study addresses this by reporting on a Delphi and expert panel involving eight senior Canadian government foresight program leaders. These leaders were asked to help identify and then rate a list of factors that they felt resulted in their foresight projects impacting senior management decisions. Results suggested that factors such as foresight methodology, while leading to good foresight, do not necessarily result in senior decision-maker impact. Instead, criteria defined in this paper as the "consultants' toolkit," such as understanding the senior decision maker's pain points and foresight managers having a strong understanding of the organization's inner workings, play a crucial role. The expert panel discussion suggested that the importance of senior management decision-making factors depends on three mediating variables: The temporal orientation of the Department, the foresight orientation of the department's senior management, and the nature of the relationship between the foresight manager and the senior decision maker. • Paper identifies factors that lead to senior management accepting and implementing the results and recommendations of foresight projects. • A two round Delphi and expert panel was held as part of this study with eight senior Canadian government foresight program leaders • Managers identified factors that relate more to a consultant tool kit than foresight methodology that results in decision impact foresight. • A contingency model is presented with three elements which the impact factors importance • The paper highlights the importance of research partnerships that include both academics and practitioners [ABSTRACT FROM AUTHOR]

• The global uniform exponential stability is established for zero-order delayed systems. • The stability results for impulsive dynamical networks are obtained. • The event-triggered impulsive control (ETIC) is designed to stabilize dynamical networks. • ETIC has lower impulse frequency and control cost than the classic impulsive control. • A non-instantaneous ETIC is proposed to improve the instantanity and discontinuity of ETIC. This paper studies the stability for impulsive dynamical networks (IDN) where different nodes may have different impulse time sequences. By deriving the conditions of global uniform exponential stability for zero-order delayed systems, the criteria of stability for IDN are established. The stability results for IDN are then used to design event-triggered impulsive control (ETIC) for stabilization of continuous-time dynamical networks (CDN). In every node of CDN, three levels of event-triggering conditions are set for ETIC. The exponential stabilization of CDN is shown to be achieved by the designed ETIC and it also shows that the ETIC is robust w.r.t. time-delays. Moreover, a non-instantaneous ETIC (NI-ETIC) is proposed for the stabilization of CDN. Three examples with numerical simulations are given to show that the designed ETIC has lower impulse frequency and cost of control than the classic time-triggered impulsive control. It is also shown that the discontinuity and the instantanity of ETIC are improved by the NI-ETIC. [ABSTRACT FROM AUTHOR]

The Kraft process is an intensive user of capital, energy, water, and chemicals, and is particularly vulnerable in the present precarious economic situation. Therefore, Canadian Kraft pulp mills offer good potential for improvement, especially if the equipment and unit operations are diagnosed in details by means of specific key performance indicators (KPI). The characterization and performance analysis of equipment is a prerequisite to optimization. A thorough evaluation of the equipment performance must be done to assess the actual vs. the expected performance before proceeding to any kind of energy improvement project. A systematic methodology for equipment performance evaluation through key performance indicators (KPIs) is presented in Part I. New key performance indicators (KPIs) based on dimensional analysis as well as other conventional key performance indicators are used to efficiently analyze and diagnose the causes of inefficiencies of the equipment, and propose adequate remedial actions. The methodology has been applied to an Eastern Canadian Kraft mill and several improvement projects leading to 30% of energy savings are proposed, entailing a low investment cost and a payback of 1.1 a. [ABSTRACT FROM AUTHOR]

• Developing a new optimization model for designing a tire closed-loop supply chain. • Presenting a Spherical fuzzy logic method to calculate the importance of suppliers. • Discussing the application of the model in Greater Toronto Area, Canada. • Solving the multi-objective model using the augmented ε -constraint method. • Performing extensive sensitivity analyses and analyzing the results. For tire manufacturers to remain profitable while fulfilling environmental and social obligations such as producer responsibility, the opportunity lies in designing a tire Closed-Loop Supply Chain (CLSC) which combines forward and reverse supply chains. In this paper, a new multi-objective mixed-integer linear programming model is proposed to configure and optimize a multi-echelon, multi-product, multi-period tire CLSC network based on multiple recovery options and markets. For one of the objectives of the model, the weighting factors (importance) of suppliers are determined according to a unique framework of qualitative criteria. In this respect, a novel decision-making method based on Spherical fuzzy logic is developed. Finally, the solution approach is devised based on the formulation of the augmented ε -constraint method for finding efficient solutions. The application of the model is illustrated focusing on the region of Greater Toronto Area in Ontario, Canada. The optimal quantities for the flows of products, and number and locations of open facilities of the network are computed. The results show that the selected suppliers and allocated orders from them are impacted by considering multiple objectives. [ABSTRACT FROM AUTHOR]

Abstract: The Environmental Effects Monitoring (EEM) Statistical Assessment Tool (SAT) Decision Support System (DSS) has been developed to provide a user-friendly data analysis, display and decision support tool for Canada''s federal environmental effects monitoring program for the pulp and paper and mining industries. The target users include industries, consultants, regional EEM coordinators, National EEM Office and scientists involved in EEM-related research. The tool allows the assessment of the effects of effluent from industrial or other sources on fish and benthic populations. Effect endpoints, which are used as indicators of potentially important effluent effects, are measured at effluent-exposed sites and are compared statistically to measures at reference sites, in order to determine if changes have occurred and the magnitude of the changes. The main driver of the EEM-SAT DSS is its rule-based expert system. The results are used in assessing the adequacy of existing regulations for protecting aquatic environments. [Copyright &y& Elsevier]

Recently, there have been growing concerns about the negative impacts of rising automobile use and road congestion on personal mobility, safety, air quality and climate change. To address these issues, special attention has been given to improving and expanding transit services in order to attract new riders and retain existing ones. Despite these efforts, transit ridership across Canada has been levelling-off and, in many cases, declining over the past few years. The goal of this study is to provide an empirical investigation of variables that affect variations in transit ridership among transit systems and over time. To achieve this goal, the study used a comprehensive longitudinal dataset of different factors collected from 103 transit agencies in Canada between 2002 and 2016. Two-stage least square (2SLS) models were developed for the purpose of the study. The results suggest that transit ridership (in terms of number of linked trips) in Canada is associated with several factors that differ according to transit agency size. These factors include built environment and socioeconomic aspects in addition to transit supply attributes. Additionally, ride-sharing systems (i.e., Uber service) have a mixed impact on ridership that varies according to the size of transit system. The presence of Uber within large transit agencies service areas is shown to have a small positive impact on ridership, while it is negatively associated with ridership for small transit agencies. This paper provides policy makers and planners with useful policy-relevant information related to the association between different factors and transit ridership. • The paper investigates the variables affecting ridership in Canada. • It uses a longitudinal dataset of various factors collected from 103 transit agencies. • Two-stage least square (2SLS) models were developed for the study. • Ridership is related to several factors that differ according to transit agency size. • Ride-sharing systems (i.e., Uber service) have a mixed impact on ridership. [ABSTRACT FROM AUTHOR]

In order to improve individual research achievements (IRA), this study investigates which affiliated countries and authors earn the most cited IRAs and whether those types of articles are associated with the number of cited papers on schizophrenia from a leading journal in the field. The Kano model was used for displaying the IRAs. Clusters of medical subject headings (MeSH) were applied to explore the core concepts of a given journal. This study aimed to apply social network analysis (SNA) and an authorship-weighted scheme (AWS) to inspect the association between MeSH terms and IRA. About 2,008 abstracts published between 2012 and 2016 in the journal Schizophrenia Research were downloaded from Pubmed Central using the keyword (Schizophr Res)[Journal] on September 20, 2018. The MeSH terms were clustered by using SNA to separate the core concepts and compare the differences in bibliometric indices (i.e., h, Ag, x and author impact factor or AIF). Visual dashboards were shown on Google Maps. Results indicate that (1) the US, the UK, and Canada earn the highest x-index; (2) the top one author from the US has the highest x-index (= 5.73 with x-core at cited = 16.44 and citable = 2); (3) the article type of schizophrenic psychology shows distinctly higher frequencies than others; and (4) article types are associated with the number of cited papers. Four approaches of the Kano model, SNA, MeSH terms, and AWS can be accommodated to display IRAs, classify article types, and quantify coauthor contributions in the article byline, respectively, and applied to other scientific disciplines in the future, not just in this specific journal. [ABSTRACT FROM AUTHOR]