Search

Abstract: This paper assesses the learning potential of dedicated wood production systems to boost yields and reduce production costs. In particular, the paper analyses past trends and provides a future outlook of developments in dedicated wood production for three cases: eucalyptus production in Brazil, poplar production in Italy and willow production in Sweden. A main objective of this paper is to evaluate the extent to which experience curves can be devised for conventional woody plantation systems, and whether these can also be applied to short rotation cropping (SRC) production systems. For current average SRC production systems, Italian poplar shows the highest cost at 5.5 €GJ−1 followed by Swedish willow at 4.4 €GJ−1 and Brazilian eucalyptus is produced to the lowest costs at 2.8 €GJ−1. It was assessed to what extent production costs can be reduced per step in the production cycle and how this affects the minimum cost levels that can ultimately be achieved. Ultimate cost reduction could lead to delivered costs of 2.2 €GJ−1 for poplar, 1.9 €GJ−1 for willow and 1.9 €GJ−1 for eucalyptus on better quality lands. Based on historic cost data and production trends, experience curves were applied providing progress ratios for poplar in Italy and eucalyptus in Brazil. Brazilian eucalyptus production follows a steeper slope (63–73%) than poplar in Italy (71–78%). The extent to, and rate at, which cost reductions can occur within the next 20 years were evaluated by combining current costs, minimum cost levels and progress ratios with ranges in European and global biomass demand projections. This shows that, at the assumed growth rates for biomass production in Europe and for global production, minimum cost levels can be reached within the next two decades for all cases. [Copyright &y& Elsevier]

This paper offers a critical look at how energy security-, food and agriculture-, and climate change-oriented international organizations frame biomass energy production in developing countries, in particular, ethanol production in Brazil. Using the world-economy system as a theoretical lens, the paper raises a concern as to whether the way these global institutions frame bioenergy's role in developing regions manifests energy and ecological inequalities between the core and the periphery, as well as creates internal contradictions that perpetuate unequal exchange embedded in the system. Simultaneously, these organizations frame Brazil as a semi-peripheral state that, while successful in finding a niche concurring with the core's demand for cheap energy and cost-effective decarbonization strategies, is not necessarily a suitable role model for the periphery's socio–economic development. [Copyright &y& Elsevier]

Based on the general acceptance that greenhouse gases from biomass can provide a low carbon energy source, bioenergy pathways are being increasingly included in many countries renewable energy and emission reduction strategies. As a result demand for biomass is rising fast with several regions forecast to encounter major resource stresses over the coming decades. The bioenergy strategies of many countries rely heavily on future imported resource to balance their bioenergy resource demands. Applying a Biomass Resource Model to evaluate and forecast the types and potential availability of different categories of biomass resources from Brazil – a case study of a country with extensive biomass resources and export potential. This research evaluates Brazil's biomass potential to 2030, and analyses the levels of resource that may be available to export. The research finds that Brazil has extensive biomass resources that are potentially sufficient to both balance Brazilian total primary energy demand by 2030 and for Brazil to increasingly become a major exporter of resource for energy end uses. The paper also discusses the potential impact for global biomass trade, if countries such as Brazil were to adopt energy strategies that resulted in greater domestic use of their available biomass. The research's analysis shows that if the Brazilian Government were to adopt strategies to utilise a greater proportion of its resource for domestic energy, Brazil could export up to >25.8% less biomass by 2030 compared to forecast export levels based on Brazil's current policy framework. [ABSTRACT FROM AUTHOR]

There is consensus that the use of renewable energy must be expanded. More and more restrictions on the use of fossil derived fuels may open the way for an increased consumption of biomass event those so far not perceived as feasible, such some biomass residue. Energy derived from biomass residues may provide even more benefits because it may replace other sources of higher-grade energy while providing proper destination for residues. Biomass from pruning residue has been overlooked as an energy resource due to many limitations. This paper addresses the issue and the means for energy valuation of pruning residues while provides final destination for them. It presents a framework to overcome most of today's challenges across the world. A case study was carried out to determine the main constraints and how they can influence the decision-making process. The variety of urban pruning residues and their rate of generation, handling, storage, logistics, economic and environmental issues, institutional regulations for a small city in Southern Brazil were taken into consideration in the analysis. Pruning residues were sampled in the field, then handled, shredded, dried, specified, stored and burnt in a concurrent woodburning furnace for testing. The diagnostics of the constraints and the lab tests were summarized and organized in a framework that aimed to assess the energy valuation of pruning residues. Results show that with proper assessment tools, projects, biomass analyses and burning technology energy valuation of pruning residues can be feasible. • Energy valuation of biomass pruning residues is feasible given proper conditions. • A novel assessment framework provides routes to overcome most of today's challenges. • A case study of energy valuation of urban pruning biomass residue in Brazil showed feasible to generate 1 to 1.5 MWe. • Information and data of bulk density, moisture content, heating value, of residues of five urban tree species. • Estimate of opportunity costs of disposal of biomass pruning residues in landfills. [ABSTRACT FROM AUTHOR]

After the 2010 to 2015 crisis in Brazil's sugarcane sector, mainly caused by government mandated fuel price ceilings, the sector has entered a new growth cycle spurred by implementation of the " RenovaBio " program in 2017. The government created RenovaBio to achieve two overarching goals: increase 2028 ethanol output by roughly 53% and incrementally increase this biofuel's share in the national energy matrix to meet GHG reduction targets established at the Paris Climate Conference - COP21. The study presented in this paper addresses the expansion of mill output to meet expected future demand by 2028 through application of a mixed-integer linear optimization model to (1) determine the amount of additional sugarcane production and mill processing capacity required to meet expected 2028 Brazilian ethanol and sugar demand and (2) optimize the location of this additional capacity to minimize production and transportation costs through the multimodal transportation network. Modeling results estimate that 151,106 t of additional sugarcane processing capacity is needed to meet forecast 2028 Brazilian demand for 41,106 m³ of sugarcane ethanol and 49,106 t of sugar. Expanded mill output will require that sugarcane cultivation increase over an additional 6% of the area defined by Brazilian Sugarcane Agroecological Zoning regulations as suitable for sugarcane cultivation. Following the model's recommended optimal spatial distribution of 2028 mill processing capacity, their output can be produced and transported at a total cost of US$ 458.65/m³ of ethanol and US$ 304.27/t of sugar, slightly below 2016 minimum total costs. • Optimal location of sugarcane crushing capacity in Brazil to meet estimated 2028 demand for ethanol and sugar. • MILP model applied to investigate the best locations for greenfield sugarcane mills. • Spatial optimization of sugar and ethanol supply and interregional freight flows through the multimodal network in Brazil. [ABSTRACT FROM AUTHOR]