Search

Highlights • The optimal pitch ratio of the ribs mounted in a channel is provided based on inverse analysis. • The entransy dissipation was taken as the objective function in the inverse method. • Taking entransy dissipation as objective function leads to a fast and stable convergence process. Abstract The ribbed surface is a widely used convection heat transfer enhancement technology. The geometric parameters of the ribbed surface have great influences on its heat transfer performance. It is crucial to determine the optimum geometric parameters. In the present work, the optimal arrangement of ribs mounted in a rectangular channel is provided by solving the inverse optimization problem with the entransy dissipation as the objective function. The parameter analysis based on the direct solution is firstly carried out to get an approximate range near the optimal pitch ratio which can provide the initial value for the inverse optimization problem; afterwards, the inverse optimization problem is solved by a modified simplified conjugate gradient method, and the accurate optimal pitch ratio is obtained; finally the optimization results are discussed in detail. The results indicate that, (1) the inverse optimization analysis presented in this paper can provide an accurate optimal value of the pitch ratio; (2) taking the entransy dissipation as the objective function could lead to a faster converge process and give a more stable result than taking the temperature data as the objective function; (3) the optimal value under the fixed heat flux boundary condition is slightly larger than that under the fixed temperature boundary condition. [ABSTRACT FROM AUTHOR]

Abstract: The main objectives of this paper are to present a procedure of how to create and set up a model for the physical processes that take place within an infant radiant warmer and to validate that Computational Fluid Dynamics (CFD) can be used to resolve such problems. In this study, the results are obtained for a simplified model, both in terms of the geometry employed and the prescribed boundary conditions. The results were numerically verified in terms of the convergence history, monitor data and the physical correctness. This study shows that the physical situation is unsteady and the results tend to oscillate, almost periodically, around a mean value. The results presented in the paper are found to be in qualitative agreement with the experimental data. This gives us confidence that the techniques employed in this paper are appropriate and form the starting point for the inclusion of more realistic effects, e.g. real shape of the newborn and radiant lamp, heat generated inside the newborn, moisture transport, etc. [Copyright &y& Elsevier]

Abstract: This paper presents a simple and rapid mathematical model to calculate the non-steady-state startup process and study the isothermal characteristics of a particular heat pipe. The model takes into consideration the special structure and usage conditions, where vapor temperature in the heat pipe changes only over time. This vapor temperature change correlation is calculated numerically and is set as the temperature boundary condition for the working well. The temperature, velocity and pressure distribution in the working well are then solved using FLUENT. The results manifest that the time required for approaching steady condition are 450s, 550s and 600s with water bath temperatures of 330K, 340K and 350K, respectively. The comparison of the calculations and experimental data shows good agreement, and the maximum deviation is 3.7K. [Copyright &y& Elsevier]

Abstract: Nowadays, consumers look for minimally processed, additive-free food products that maintain their organoleptic properties. This has led to the development of new technologies for food processing. One emerging technology is high hydrostatic pressure, as it proves to be very effective in prolonging the shelf life of foods without losing its properties. Recent research has involved modelling and simulating the effect of combining thermal and high pressure processes (see Denys et al. (2000) [3], Infante et al. (2009) [5], Knoerzer et al. (2007) [6], Otero et al. (2007) [9]). The focus is mainly on the inactivation of certain enzymes and microorganisms that are harmful to food. Various mathematical models that study the behaviour of these enzymes and microorganisms during a high pressure process have been proposed (see Infante et al. (2009) [5], Knoerzer et al. (2007) [6]). Such models need the temperature and pressure profiles of the whole process as an input. In this paper we present two dimensional models, with different types of boundary conditions, to calculate the temperature profile for solid type foods. We give an exact solution and propose several simplifications, in both two and one dimensions. The temperature profile of these simplified two and one dimensional models is calculated both numerically and analytically, and the solutions are compared. Our results show a very good agreement for all the approximations proposed, and so we can conclude that the simplifications and dimensional reduction are reasonable for certain parameter values, which are specified in this work. [Copyright &y& Elsevier]

Abstract: In order to study the influence of moisture transfer on the wall internal surface temperature, a coupled heat and moisture transfer transient model was proposed in this paper. Relative humidity and temperature were chosen as the driving potentials. The accuracy of the proposed model was verified by comparing the simulated results with the experimental data. By employing the developed model, the internal surface temperature of walls made of different materials was evaluated under the constant and variable boundary conditions. The results show that the effect of moisture transfer on the wall internal surface temperature is significant. When the moisture transfer is taken into account, the internal surface temperature has cooling effect on the indoor air and is beneficial to improve the indoor thermal environment during the working hours in summer, which lays a scientific basis for low energy building design. [Copyright &y& Elsevier]

Abstract: The paper deals with modeling the convective drying process. A relevant and reliable mathematical model that captures the history and distribution of temperature is presented. The attention is focused on the simultaneous heat and mass transfer occurring during drying where dry and hot air flows about the food. In the present study, external resistance to mass transfer is considered negligible. As a result, the drying curve is almost independent of the boundary conditions, which means that drying is diffusion-controlled. The main connotation of present study regards to undertake analytical procedure to establish the novel model for practical applications. The results show that the temperature evolution can be evaluated from an advanced analytical solution in a quick and efficient manner. The model is validated with the literature experimental data obtained for carrot and mango slabs. A good agreement is obtained between the model predictions and the available experimental results. [Copyright &y& Elsevier]

Abstract: This paper investigates the numerical simulation of non-Fourier transient heat transfer in a two-dimensional sub-100nm metal-oxide-semiconductor field-effect transistor (MOSFET). The dual-phase-lag (DPL) model with a specific normalization procedure is introduced for the modeling of nanoscale heat transport. The boundary conditions are selected similar to what existed in a real MOSFET device, both uniform and non-uniform heat generations within the transistor are applied, and the end parts of the top boundary which are in contact with the metallic material are left open. A temperature-jump boundary condition is used on all boundaries in order to consider the boundary phonon scattering at micro and nanoscale. A three-level finite difference scheme has been employed to generate the numerical results which are illustrated for a silicon sub-100nm MOSFET corresponding to the Knudsen number of 10. The results are presented at real times less than 50ps to avoid the three-dimensional effects. It is concluded that the combination of the DPL model with mixed-type temperature boundary condition is able to predict the heat flux and temperature distribution obtained from the Boltzmann transport equation (BTE) more accurate than the ballistic-diffusive equations (BDE). After verification of our results, the thermal field and the hotspot temperature within the bulk silicon are presented and the effect of adding a layer of silicon-dioxide to the transistor on its thermal behavior has been investigated. [Copyright &y& Elsevier]

Abstract: In the precision glass moulding process, the heat transfer and the resulting transient temperature distributions of the molten glass are of great importance because they significantly affect the productivity as well as the thermally induced residual stresses in the final product. Thermal modelling of the heating system in the glass moulding process considering detailed heating mechanisms therefore plays an important part in optimizing the heating system and the subsequent pressing stage in the lens manufacturing process. The current paper deals with three-dimensional transient thermal modelling of the multi-stage heating system in a wafer based glass moulding process. In order to investigate the importance of the radiation from the interior and surface of the glass, a simple finite volume code is developed to model one dimensional radiation–conduction heat transfer in the glass wafer for an extreme case with very high temperature difference considering temperature dependant thermal conductivity and heat capacity. Afterwards, by using three-dimensional FEM modelling along with a predefined experimental test, the equivalent glass–mould interface contact resistance is determined for two different pressures. Finally, the three-dimensional modelling of the multi-stage heating system in the wafer based glass moulding process is simulated with the FEM software ABAQUS for a particular industrial application for mobile phone camera lenses to obtain the temperature distribution in the glass wafer. In the numerical modelling, the interface boundary conditions for each heating stage are changed according to the determining heat transfer mechanism(s). Numerical results are compared with experimental data to show the validity of the numerical modelling. The obtained results show that the right thermal modelling is highly dependent on the proper choice of thermal boundary conditions in different stages according to the real physical phenomena behind the process. [Copyright &y& Elsevier]

Abstract: The paper presents a model-based investigation of a metal hydride reactor applied as a solid state hydrogen storage device. The elements of a metal hydride reactor are hydrogen supply duct, internal hydrogen distribution, hydride bed, reactor shell and the flow domain of the heat transfer fluid. Internal hydrogen distribution and hydride bed are porous media. Therefore, hydrogen flows through non-porous and porous regions during its reversible exothermic absorption and endothermic desorption, respectively. The interface between porous and non-porous regions is a discontinuity with respect to energy transport mechanisms. Hence, Danckwerts-type boundary conditions for the energy balance equation are introduced. Application of the first and second law of thermodynamics to the interface reveals that temperature jumps may occur at the hydrogen inlet but are not allowed at the hydrogen outlet. Exemplarily the loading behavior of a metal hydride storage tank based on sodium alanate is analyzed. It is demonstrated and experimentally validated that only Danckwerts-type boundary conditions predict the important cooling effect of the inlet hydrogen on the exothermic absorption process correctly. [Copyright &y& Elsevier]

Abstract: This paper focuses on the investigation of the 3D mathematical model to simulate the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media. The flow of the liquid moisture, the water vapor sorption/desorption by fibers and the diffusion of the water vapor are taken into account in this 3D model. Prediction-corrector method is used to solve the 3D governing equations. A series of computational results of the coupled heat and moisture transfer are obtained with the specific initial conditions and boundary conditions. The distribution of the water vapor concentration in the void spaces, the volume fraction of the liquid water in the void spaces, the distribution of the water content in fibers and the changes of the temperature in porous fibrous media are computed. It is shown that the effects of the gravity and capillary actions are significant in hygroscopic porous fibrous media. The comparison with the experimental measurements shows the reasonable agreement between the two. The results illustrate that the 3D model of the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media is satisfactory. [Copyright &y& Elsevier]

Abstract: In this paper the two main drawbacks of the heat balance integral methods are examined. Firstly we investigate the choice of approximating function. For a standard polynomial form it is shown that combining the heat balance and refined integral methods to determine the power of the highest order term will either lead to the same, or more often, greatly improved accuracy on standard methods. Secondly we examine thermal problems with a time-dependent boundary condition. In doing so we develop a logarithmic approximating function. This new function allows us to model moving peaks in the temperature profile, a feature that previous heat balance methods cannot capture. If the boundary temperature varies so that at some time t >0 it equals the far-field temperature, then standard methods predict that the temperature is everywhere at this constant value. The new method predicts the correct behaviour. It is also shown that this function provides even more accurate results, when coupled with the new CIM, than the polynomial profile. Analysis primarily focuses on a specified constant boundary temperature and is then extended to constant flux, Newton cooling and time dependent boundary conditions. [Copyright &y& Elsevier]

Abstract: For purposes of an accurate mathematical modeling, it is essential to establish trustworthy boundary conditions. The heat transfer that occurs at the casting/mold interface is one of these important conditions, which is a fundamental task during unsteady solidification in permanent mold casting processes. This paper presents an overview of the inverse analysis technique (IHCP) applied to the determination of interfacial heat transfer coefficients, hi , for a number of alloy solidification situations. A search algorithm is used to find the transient metal/mold interface coefficient during solidification which is reported either as a function of the casting surface temperature or time. Factors affecting hi such as the direction of gravity in relation to the growth interface, the initial melt temperature profile, the wettability of the liquid layer in contact with the mold inner surface, were individually analyzed and experimental laws for hi have been established. [Copyright &y& Elsevier]

Abstract: In the paper, numerical and experimental analyses of heat and mass transfer during frost formation on a fin-and-tube heat exchanger have been presented. Modelling of the frost formation on cold surfaces placed in a humid air stream, requires a complex mathematical approach. A transient two-dimensional mathematical model of frost formation has been developed. The applied mathematical model has been defined using governing equations for the boundary layer that include air and frost sub-domains as well as a boundary condition on the air–frost interface. The mathematical model with initial and boundary conditions has been discretised according to the finite volume method and solved numerically using the SIMPLER algorithm for the velocity–pressure coupling. Results have shown that the frost layer formation significantly influences the heat transfer between air and fins. As a result of numerical calculations, time-wise frost thickness variations for different air humidities, temperatures and velocities have been presented. Using the developed mathematical model, the algorithm and the computer code, which have been experimentally validated, it is possible to predict a decrease of exchanged heat flux in the heat exchanger under frost growth conditions. [Copyright &y& Elsevier]

Abstract: The paper discusses heat transfer enhancement and deterioration phenomena observed in experimental data for fluids at supercritical pressure. The results obtained by the application of various CFD turbulence models in the prediction of experimental data for water and carbon dioxide flowing in circular tubes are firstly described. On this basis, the capabilities of the addressed models in predicting the observed phenomena are shortly discussed. Then, the analysis focuses on further results obtained by a low-Reynolds number k – ε model addressing one of the considered experimental apparatuses by changing the operating conditions. In particular, the usual imposed heat flux boundary condition is changed to assigned wall temperature, in order to highlight effects otherwise impossible to point out. The obtained results, supported by considerations drawn from experimental information, allow comparing the trends observed for heat transfer deterioration at supercritical pressure with those typical of the thermal crisis in boiling systems, clarifying old concepts of similarity among them. [Copyright &y& Elsevier]