Search

Abstract: This paper investigates the numerical simulation of non-Fourier transient heat transfer in a two-dimensional sub-100nm metal-oxide-semiconductor field-effect transistor (MOSFET). The dual-phase-lag (DPL) model with a specific normalization procedure is introduced for the modeling of nanoscale heat transport. The boundary conditions are selected similar to what existed in a real MOSFET device, both uniform and non-uniform heat generations within the transistor are applied, and the end parts of the top boundary which are in contact with the metallic material are left open. A temperature-jump boundary condition is used on all boundaries in order to consider the boundary phonon scattering at micro and nanoscale. A three-level finite difference scheme has been employed to generate the numerical results which are illustrated for a silicon sub-100nm MOSFET corresponding to the Knudsen number of 10. The results are presented at real times less than 50ps to avoid the three-dimensional effects. It is concluded that the combination of the DPL model with mixed-type temperature boundary condition is able to predict the heat flux and temperature distribution obtained from the Boltzmann transport equation (BTE) more accurate than the ballistic-diffusive equations (BDE). After verification of our results, the thermal field and the hotspot temperature within the bulk silicon are presented and the effect of adding a layer of silicon-dioxide to the transistor on its thermal behavior has been investigated. [Copyright &y& Elsevier]

Abstract: This paper focuses on the investigation of the 3D mathematical model to simulate the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media. The flow of the liquid moisture, the water vapor sorption/desorption by fibers and the diffusion of the water vapor are taken into account in this 3D model. Prediction-corrector method is used to solve the 3D governing equations. A series of computational results of the coupled heat and moisture transfer are obtained with the specific initial conditions and boundary conditions. The distribution of the water vapor concentration in the void spaces, the volume fraction of the liquid water in the void spaces, the distribution of the water content in fibers and the changes of the temperature in porous fibrous media are computed. It is shown that the effects of the gravity and capillary actions are significant in hygroscopic porous fibrous media. The comparison with the experimental measurements shows the reasonable agreement between the two. The results illustrate that the 3D model of the coupled heat and liquid moisture transfer in hygroscopic porous fibrous media is satisfactory. [Copyright &y& Elsevier]