Search

Abstract: Porous sialon ceramics have been cost-effectively prepared by pressureless sintering from a mixture of elongated SHS β-sialon powders with an α-sialon precursor composition composed of α-Si3N4, AlN, Y2O3 and Al2O3. The obtained porous sialon ceramics exhibited low shrinkage and homogeneous pore size distribution. The results of X-ray diffraction and scanning electron microscopy showed that a uniform microstructure with elongated and intermingled β-SiAlON grains, which were strongly connected by α-SiAlON phase, has been obtained. [Copyright &y& Elsevier]

• B-site precursor method can effectively inhibit the appearance of second phase. • B-site precursor method can obtain high reactivity Mg 4 Nb 2 O 9 powders. • B-site precursor method can promote integrality of the crystal structure. Mg 4 Nb 2 O 9 ceramics have been prepared by B-site precursor method in this work. Experimental results demonstrate that the uniform particles-size distribution of Mg 4 Nb 2 O 9 powders can be obtained, which exhibit high reactivity to promote the grain growth of Mg 4 Nb 2 O 9 ceramics. Moreover, the Mg 4 Nb 2 O 9 ceramics via B-site precursor method can be sintered at a wide range of sintering temperature from 1275 to 1375 °C with single phase Mg 4 Nb 2 O 9 composition and high crystallinity. Compared to the conventional solid-state method, the Mg 4 Nb 2 O 9 ceramics prepared by B-site precursor method exhibit excellent Q × f value by above 168,756 GHz. [ABSTRACT FROM AUTHOR]

BaO-Sm 2 O 3 –5TiO 2 (BST) added by Al 2 O 3 was prepared by solid-state reaction method. The main phase is Ba 3.99 Sm 9.34 Ti 18 O 54 of orthorhombic tungsten bronze structure, and the secondary phase is Ba 1.18 Al 1.90 Ti 6.09 O 16 of tetragonal structure, which has two types of grains: one is grey and cubic, and the other is white and quasi-rectangular. Microstructure was characterized by XRD, SEM, and Raman spectra. Micromechanical properties of different phases were assessed by nanoindentation and micro-scratch tests with Berkovich indenter. Volume fractions of different phases obtained by statistical analysis of grid indentation are in good agreement with those obtained by XRD analysis. Vickers hardness method is more appropriate for the determination of the fracture toughness of dielectric ceramics. BST ceramic without addition of Al 2 O 3 has better mechanical properties than BST-A with addition of Al 2 O 3 , indicating that addition of Al 2 O 3 impairs the micromechanical properties of dielectric ceramics. [ABSTRACT FROM AUTHOR]

Dense AlN ceramics with a thermal conductivity of 180W/m·K were obtained at the sintering temperature of 1750 °C using CaF2 and YF3 as additives. At temperatures below 1650 °C, the shrinkage of AlN ceramics is promoted by liquid (Ca,Y)F2 and Ca12Al14O32F2. Liquid CaYAlO4 mainly improves the densification of the sample when the sintering temperature increases to 1750 °C. The formation of liquid (Ca,Y)F2 at a relatively low temperature results in homogeneous YF3 distribution around the AlN particles, which benefits the removal of oxygen impurity in the AlN lattice, and thus a higher thermal conductivity. [Copyright &y& Elsevier]