Search

In this paper, a multidisciplinary framework to design and produce a topological structure with inhomogeneous distributions of fiber orientation and content for 3D printed continuous fiber reinforced polymer composites (CFRPCs) was proposed to maximize load and fiber utilization efficiency. The combination of optimization design and 3D printing for composites with curvilinear fiber was achieved that the fiber orientation and content were progressively designed in the two-stage procedure. The fiber orientation and topological structure were concurrently optimized firstly. Then, the fiber content was designed through finite element analysis (FEA) and realized by changing continuous fiber path with a hierarchical structure design method. Based on this, the topological beam has been additively manufactured and experimentally investigated, showing 38.55% and 25.40% in stiffness and peak load enhancement compared with the original CFRPCs design, while 264.39% and 165.84% increments compared with pure polymer design. The proposed approach has widened design freedom of CFRPCs 3D printing, possessing potential application to solve engineering problem in aerospace, automotive and other fields. [ABSTRACT FROM AUTHOR]

3D printing of continuous fiber reinforced thermoplastic composites (CFRTPCs) enables the fabrication of multiscale structures, whose features can simultaneously span the microscale fiber trajectory and macroscale topological structure. In this study, a multiscale design and manufacturing strategy integrating concurrent optimization of micro fiber orientation and macro structural topology was developed for CFRTPCs and realized by ingenious path planning for 3D printing process. Typical structures, such as Messerschmitt-Bölkow-Blohm (MBB) beam and cantilever beam, were verified experimentally in comparison with the monoscale structures. Structural stiffness and peak load could be improved by 36.27% and 64.43% respectively for MBB beam, 123.07% and 52.16% respectively for cantilever beam, showing the significant influence on concurrent material and structure design for CFRTPCs. Multiscale concurrent design and 3D printing could promote the potential of CFRTPCs, and even challenge traditional design and manufacturing mechanism relating material and structure scale. [ABSTRACT FROM AUTHOR]

Overall performance of curvilinear fiber reinforced composite structures (CFRCSs) can be designed by adjusting the local fiber orientation and content. In this paper, an optimized design method based on stress gradient distribution for CFRCSs was proposed to improve the efficiency in strength of continuous fiber reinforced composites. The mechanism of fiber content regulation in continuous fiber reinforced composites 3D printing was studied. The adaptive feed calculation method of resin was proposed, and the 3D printing of CFRCSs was realized. A 3D printed composite perforated plate with a hole under tensile loading was optimized and fabricated to verify the effectiveness of the proposed methods. After the optimized design, the maximum stress concentration factor was reduced by 36%, and the ultimate tensile strength was increased by 42%. Through the proposed optimization design method, the fiber content distribution corresponds to the stress distribution, and the fiber direction distribution corresponds to the maximum principal stress direction distribution. At the same time, the stress was redistributed to reduce the stress concentration. Therefore, the ultimate strength was improved. The optimized design method and 3D printing method of CFRCSs have potential application prospects in aerospace, automotive and other fields. Image 1 [ABSTRACT FROM AUTHOR]

3D printing provides a new technical means for the preparation of functionally controlled continuous fiber reinforced composites (CFRCs) with variable fiber content. The constitutive model of 3D printed CFRCs with different fiber contents are the basis for establishing mechanical analysis models and design methods of functionally regulated CFRCs based on 3D printing. In this paper, stiffness and strength properties of 3D printed CFRCs with different fiber contents were systematically studied, and the mapping relationship between material properties and fiber content was obtained. The failure processes of 3D printed CFRCs under different loads were studied by microstructural morphology and interfacial performance analysis, revealing the formation mechanisms of the material properties. The constitutive model and finite element analysis method of 3D printed CFRCs were established by using the material properties of 3D printed CFRCs with different fiber contents. The mechanical analysis mode was used to predict and analyze the performance of functionally graded CFRCs with variable fiber content. The results show that the mechanical analysis mode can be used for the optimization design and mechanical analysis of functionally controlled CFRCs. [ABSTRACT FROM AUTHOR]