Search

Herein, a sensitive voltammetric method for the determination of diethylstilbestrol (DES), illegally used as a growth promoter in animal husbandry, was developed using electrochemically reduced graphene oxide–multiwalled carbon nanotubes (ERGO–MWCNTs) modified electrode. The incorporated multiwalled carbon nanotubes (MWCNTs) served as electrical conducting wires, which could facilitate the electrochemical reduction of graphene oxide (GO). Compared to either electrochemically reduced graphene oxide (ERGO) or MWCNTs, integrating these nanostructures resulted in a strong synergistic effect between the two materials consequently leading to a superior hybrid material with higher activity for the electro-oxidation of DES. The electron transfer coefficient ( α ), the standard rate constant ( k s ), electrochemically effective surface area ( A ) and the saturating absorption capacity ( Г s ) were calculated. Under the optimized conditions, ERGO–MWCNTs modified electrode exhibited better linearity than either ERGO or MWCNTs over ranges from 0.01 to 40 μM with the detection limit of 3 nM ( S / N = 3). Moreover, the proposed method was successfully applied to determine DES in real sample and satisfactory results were obtained. The results showed that the modified electrode exhibits an excellent catalytic activity, good sensitivity and reproducibility. [ABSTRACT FROM AUTHOR]

Hierarchical nanocomposites of poly(3,4-ethylenedioxythiophene) nanorods array on graphene oxide nanosheets (PEDOT/GO) were synthesized via a liquid–liquid interfacial polymerization method. The synthesized composites were characterized by using Fourier transform infrared (FTIR) and Raman spectroscopic studies, and their morphology was analyzed by transmission electron microscopy (TEM). Characterization and surface morphology results indicated that PEDOT with a nanorods-like structure successfully anchored on the surface of GO sheets, which could enhance the electro-active sites of the nanocomposites. Then the obtained PEDOT/GO nanocomposites were utilized to modify glassy carbon electrode and designed for the trace level sensing of rutin. Electrochemical results revealed that the PEDOT/GO nanocomposites modified electrode exhibited larger oxidation peak currents of rutin than pure PEDOT and GO owing to the synergistic effect of GO and PEDOT nanorods. Under optimized conditions, the anodic peak current was linear to the concentration of rutin in the range from 0.004 to 60 μM with the detection limit of 0.00125 μM. To further validate its possible application, the proposed method was successfully used for the determination of rutin in pharmaceutical formulations with satisfactory results. [ABSTRACT FROM AUTHOR]