Search

• The proposed protection strategy enhances the stability and reliability of power systems by. • Precise discrimination between transient and permanent SLG faults. • Fast and precise diagnosis of the successful reclosing time in a case of the transient SLG fault. • Significant reduction in the dead time in a case of the transient SLG fault. • Being efficient even in noise exposure situations and not dependent on the fault location or threshold values. Opportune detection of transient faults and restoration of the faulty phase in the least possible time plays a key role in improving the stability of high voltage transmission lines (HVTLs). This paper presents a novel four-step strategy for the protection of HVTLs so that the stability and reliability of power systems are enhanced. Firstly, the cumulative sum (CUSUM) algorithm is used to quickly detect the transient and determine the faulty phase. In the second step, the settings of the static var compensator (SVC) are changed to reduce the reclosing dead time as much as possible. Afterward, the transient or permanent type of the fault is identified based on the proposed principal component analysis-support vector machine (PCA-SVM) algorithm. In the fourth step, if a transient fault is recognized, the successful single-phase reclosing time is identified by the PCA-SVM and the reclosing command is issued to high voltage circuit breakers (HVCBs). Simulation results obtained by using EMTP-RV and MATLAB for a sample 400 kV power system illustrate that the proposed protection strategy can increase the reliability of the power system via reduction of the dead time, correct detection of transient faults from permanent ones, and accurate detection of the reclosing time. [ABSTRACT FROM AUTHOR]

• This method is only based on the current data in relay location. • The proposed method is completely analytical. • A negative-sequence based approach used to fault location estimation. This paper introduces an accurate fault location algorithm for double-circuit transmission lines compensated by Static Var Compensator (SVC). The proposed algorithm is based on the negative-sequence circuit of the transmission system and it depends only on the current data available from one end of the line. Since only magnitudes of current signals are required, there is no need for data synchronization. The proposed technique uses the COMTRADE fault files available from digital distance relays and it can effectively locate the all types of unbalanced faults, regardless the high fault resistance, effect of mutual coupling and SVC current injection information. As one formula can be used for all types of fault, classification of fault types and phase selection are not required. The shunt capacitances of the line are considered by utilizing the distributed parameters model of the transmission lines. The proposed algorithm is rigorously investigated for various fault scenarios in SVC compensated transmission system. The simulation cases in the MATLAB environment verifies that the proposed scheme has excellent performance. Test results are compared with a conventional fault location technique to illustrate the accuracy of the proposed algorithm. [ABSTRACT FROM AUTHOR]