Search

• Computational modeling to evaluate the LOE protection of synchronous generators connected to a transmission line with static var compensator (SVC). • Comparative of traditional LOE protection of with a proposed LOE protection method based on a multilayer perceptron-type artificial neural network (ANN). • Show the effectiveness of the proposed ANN LOE protection to reach faster actuation time than the traditional LOE protection. Flexible Alternating Current Transmission Systems (FACTS) connected to Transmission Lines (TLs) make systems more flexible, and optimize their operational capacity. Despite improvements in TL operational aspects, added FACTS can modify the amplitude, voltage, and current angles of the system wherein they are inserted and consequently the measured impedance, which can affect synchronous machine protections that are based on this feature. Firstly, this paper presents a set of computational simulations to evaluate possible changes in the synchronous machine protection connected to a TL with Static Var Compensator (SVC). Finally, is this context the traditional loss of excitation (LOE) protection is comparing with a proposed approach based on the use of a multilayer perceptron-type Artificial Neural Network (ANN). The simulation results show the effectiveness and robustness of the proposed ANN LOE protection to reach faster actuation time than the traditional LOE protection. [ABSTRACT FROM AUTHOR]

Presence of shunt FACTS (Flexible Alternating Current Transmission System) device significantly affect the performance of protection system and may create security and reliability issues. This paper introduces a novel approach for zone identification in transmission line employing shunt FACTS devices such as Static Var Compensator (SVC) and Static Synchronous Compensator (STATCOM). The technique depends on the modified apparent impedance seen by the impedance relay for all possible operating conditions. In this technique the Support Vector Machine (SVM) is used for discriminating faulty zone (zone 1 or zone 2). In addition an optimization technique viz. Genetic Algorithm (GA) is used to optimize SVM parameters. A typical 230 kV system was simulated in PSCAD/EMTP software and the results show that the proposed scheme is secure, accurate and reliable under the wide variation in power system parameters like load angle, fault resistance, fault location, inception angle and compensation level. [ABSTRACT FROM AUTHOR]

• The proposed protection strategy enhances the stability and reliability of power systems by. • Precise discrimination between transient and permanent SLG faults. • Fast and precise diagnosis of the successful reclosing time in a case of the transient SLG fault. • Significant reduction in the dead time in a case of the transient SLG fault. • Being efficient even in noise exposure situations and not dependent on the fault location or threshold values. Opportune detection of transient faults and restoration of the faulty phase in the least possible time plays a key role in improving the stability of high voltage transmission lines (HVTLs). This paper presents a novel four-step strategy for the protection of HVTLs so that the stability and reliability of power systems are enhanced. Firstly, the cumulative sum (CUSUM) algorithm is used to quickly detect the transient and determine the faulty phase. In the second step, the settings of the static var compensator (SVC) are changed to reduce the reclosing dead time as much as possible. Afterward, the transient or permanent type of the fault is identified based on the proposed principal component analysis-support vector machine (PCA-SVM) algorithm. In the fourth step, if a transient fault is recognized, the successful single-phase reclosing time is identified by the PCA-SVM and the reclosing command is issued to high voltage circuit breakers (HVCBs). Simulation results obtained by using EMTP-RV and MATLAB for a sample 400 kV power system illustrate that the proposed protection strategy can increase the reliability of the power system via reduction of the dead time, correct detection of transient faults from permanent ones, and accurate detection of the reclosing time. [ABSTRACT FROM AUTHOR]

Highlights: [•] The effect of Static Var Compensator (SVC) connected in transmission line on adaptive distance protection is studied. [•] The SVC is connected at three locations in transmission line. [•] Measured impedances by the relay with and without SVC is determined. [•] SVC connected at mid-point affects seriously on the characteristics of relay. [•] Discrete Fourier Transform (DFT) is used to estimate the phasors of the voltage and current at the relaying bus during fault. [ABSTRACT FROM AUTHOR]

• Static var compensator causes a delay in operation of loss of excitation protection. • Delay also depends on the power dispatch and the severity of the loss of excitation. • Static var compensator causes under-reach of commercial loss of excitation relay. • Presence of static var compensator causes a displacement of impedance trajectory. • Positive offset relay adjustment seems to be more adequate than negative adjustment. The static var compensator (SVC) is one of the devices that has been widely used for reactive compensation to improve the capacity and flexibility of power transfer in the electrical power system. However, the SVC changes the voltages and currents of the power network to which it is connected. Consequently, the measured impedance can be changed and affect protection relays operation based on this characteristic. Several papers have been published about the SVC effects on distance protection applied in transmission lines (TL). However, it is not widely known the impact of SVC on the transient behavior of generators, such as protection against loss of excitation (LOE) in synchronous machines connected to TL with SVC. In this sense, based on the modeling of a test electrical power system in the PSCAD/EMTDC simulation environment, the assessment of the effects of SVC on the behavior of the ANSI 40 protection function for the conditions of the total LOE and partial LOE since these events can cause the synchronous machine to operate in conditions above the rated ones. In addition, this paper presents a testbed that allows performing secondary tests in physical relays when simulated signals are applied to perform protection studies in the presence of SVC in power systems. [ABSTRACT FROM AUTHOR]

• A new reintegration-driven ICI framework, called R-ICI, is proposed. • The proposed R-ICI model improves frequency stability of islands using ESSs. • Transient voltage stability of islands is improved using ESSs and SVCs. • The interaction between frequency and voltage is considered by a linear IFR model. • An active/reactive charging and discharging scheme is introduced for ESSs. In this paper, a reintegration-based multi-objective intentional controlled islanding (ICI) model is proposed to enhance resiliency of electrical power systems under catastrophic events. This remedial measure plan relies on a mixed-integer linear programming model with two objective functions including reintegration risk and total load shedding value. While ensuring that each island includes only coherent generators, the proposed multi-objective model solves the controlled islanding problem using lexicographic optimization approach. To ease the islands' reintegration, charging reactive power, reliability, capacity, and power flow disruption of transmission lines are considered in the model. After implementation of controlled islanding, each resulted island may face temporary active/reactive load-generation imbalance, which may put the islands at the risk of frequency instability, transient voltage instability or a combination of both. The proposed model reduces these risks by modeling energy storage systems (ESSs) and static VAR compensators (SVCs) as fast corrective control actions. In addition to modeling voltage dependent loads in the controlled islanding problem, a linear island frequency response (IFR) model is proposed for frequency stability assessment. The test results of the proposed ICI model on the IEEE 39-bus and IEEE 118-bus test systems demonstrate its performance. [ABSTRACT FROM AUTHOR]

• A novel single-end protection scheme for the compensated transmission line based on traveling waves. • Impact of SVC on traveling waves passing through a connection point of SVC. • Evaluates the effects of generated transients during faults resulted from SVC switching. • This article employed the game theory to discriminate the detected traveling waves. This paper proposes a novel single-end protection scheme for the compensated transmission line based on traveling waves and Game Theory. Initially, this study investigates the effects of Static VAR Compensator (SVC) on Traveling Waves (TW) passing through SVC location. Subsequently, it evaluates the impacts of SVC switching on conventional protections based on traveling wave theory. Following that, a single-end method to locate faults on compensated transmission lines with SVC is presented in this study. Moreover, Game theory was utilized to discriminate extracted TWs in this paper. In order to investigate the sensitivity of the proposed scheme regarding the extraction techniques of TW, two techniques, namely Mathematical Morphology Filter (MMF) and Discrete Wavelet Transform (DWT) have been used to process the signals in this study. The simulation studies using PSCAD software indicate that the proposed protection scheme is reliable and accurate for all possible types of faults on transmission lines with and without SVC. In addition, the proposed technique presents noise immunity. [ABSTRACT FROM AUTHOR]

This paper presents a secure tri-level planner-disaster-risk-averse-replanner model for resilience-oriented investment planning in integrated electric power and natural gas networks, where generation units, static VAr compensators, wind farms, transmission lines, and gas pipelines are considered as investment candidates. Additionally, emergency demand response is utilized to enhance the resilience of the integrated energy system. The proposed model is capable of controlling the resilience of the integrated energy system through a specific parameter designated as the resilience indicator and solved by a sequential three-level algorithm. The first-level problem finds the optimal investment plan before any disruptive event. Given the optimal investment plan obtained by solving the first-level problem, the second-level problem finds worst-case disruptive events affecting different components in the integrated energy system, where the vulnerability of these components is evaluated, aiming at considering a multi-disaster and multi-zone resilience model. Given a specific resilience budget, which limits replanning costs, the third-level problem maximizes the resilience of the integrated network by replanning investment decisions of the first-level problem, aiming at compensating for the unserved demand caused by the second-level problem. Case studies justify the suitability of the proposed model to enhance the resilience of the integrated system under different disastrous events. • A secure tri-level risk-averse expansion co-planning model is introduced. • The investment/disaster decisions are made for all energy system components. • A new resilience indicator, called resilience budget, is presented. • Several here-and-now and wait-to-see investment/operation decisions are considered. • Various techno-economic constraints are modeled to ensure the security of the integrated energy system. [ABSTRACT FROM AUTHOR]

• This method is only based on the current data in relay location. • The proposed method is completely analytical. • A negative-sequence based approach used to fault location estimation. This paper introduces an accurate fault location algorithm for double-circuit transmission lines compensated by Static Var Compensator (SVC). The proposed algorithm is based on the negative-sequence circuit of the transmission system and it depends only on the current data available from one end of the line. Since only magnitudes of current signals are required, there is no need for data synchronization. The proposed technique uses the COMTRADE fault files available from digital distance relays and it can effectively locate the all types of unbalanced faults, regardless the high fault resistance, effect of mutual coupling and SVC current injection information. As one formula can be used for all types of fault, classification of fault types and phase selection are not required. The shunt capacitances of the line are considered by utilizing the distributed parameters model of the transmission lines. The proposed algorithm is rigorously investigated for various fault scenarios in SVC compensated transmission system. The simulation cases in the MATLAB environment verifies that the proposed scheme has excellent performance. Test results are compared with a conventional fault location technique to illustrate the accuracy of the proposed algorithm. [ABSTRACT FROM AUTHOR]