Search

Electrochemically reduced graphene oxide (ERGO) based voltammetric sensors have drawn considerable attentions due to their simple preparation process and outstanding electrochemical properties. While quite a lot of work suffers from problems in terms of sensitivity and cycling stability. Here, we demonstrate that the reduction extent of ERGO displays a crucial role in enhancing sensitivity and preventing electrode fouling. To illustrate this, partially reduced and relatively complete reduced ERGO films were prepared via the electrochemical method. The reduction extent was controlled by performing cyclic voltammetry with varieties of reduction cycle numbers. Results indicated that partially reduced ERGO film with 5 reduction cycle numbers (ERGO 5 ) showed the highest sensitivity towards electrochemical oxidation of isoniazid (INZ) among all the ERGO films with different reduction extents, and acquired better electrode stability as compared with ERGO 15 . Under the optimal conditions, the peak currents on ERGO 5 modified electrode increased linearly with the concentrations of INZ in the range of 0.09–100 μM. The detection limit of INZ reached 15 nM (S/N = 3). The present work has a guidance meaning in developing ERGO based sensors for detecting other electroactive analytes. [ABSTRACT FROM AUTHOR]

Herein, a sensitive voltammetric method for the determination of diethylstilbestrol (DES), illegally used as a growth promoter in animal husbandry, was developed using electrochemically reduced graphene oxide–multiwalled carbon nanotubes (ERGO–MWCNTs) modified electrode. The incorporated multiwalled carbon nanotubes (MWCNTs) served as electrical conducting wires, which could facilitate the electrochemical reduction of graphene oxide (GO). Compared to either electrochemically reduced graphene oxide (ERGO) or MWCNTs, integrating these nanostructures resulted in a strong synergistic effect between the two materials consequently leading to a superior hybrid material with higher activity for the electro-oxidation of DES. The electron transfer coefficient ( α ), the standard rate constant ( k s ), electrochemically effective surface area ( A ) and the saturating absorption capacity ( Г s ) were calculated. Under the optimized conditions, ERGO–MWCNTs modified electrode exhibited better linearity than either ERGO or MWCNTs over ranges from 0.01 to 40 μM with the detection limit of 3 nM ( S / N = 3). Moreover, the proposed method was successfully applied to determine DES in real sample and satisfactory results were obtained. The results showed that the modified electrode exhibits an excellent catalytic activity, good sensitivity and reproducibility. [ABSTRACT FROM AUTHOR]