Search

Abstract: This study presents calculations on the global fuel energy consumption used to overcome friction in passenger cars in terms of friction in the engine, transmission, tires, and brakes. Friction in tribocontacts was estimated according to prevailing contact mechanisms such as elastohydrodynamic, hydrodynamic, mixed, and boundary lubrication. Coefficients of friction in the tribocontacts were estimated based on available information in the literature on the average passenger car in use today, a car with today’s advanced commercial tribological technology, a car with today’s best advanced technology based upon recent research and development, and a car with the best technology forecasted in the next 10 years. The following conclusions were reached: [•] In passenger cars, one-third of the fuel energy is used to overcome friction in the engine, transmission, tires, and brakes. The direct frictional losses, with braking friction excluded, are 28% of the fuel energy. In total, 21.5% of the fuel energy is used to move the car. [•] Worldwide, 208,000 million liters of fuel (gasoline and diesel) was used in 2009 to overcome friction in passenger cars. This equals 360 million tonne oil equivalent per year (Mtoe/a) or 7.3millionTJ/a. Reductions in frictional losses will lead to a threefold improvement in fuel economy as it will reduce both the exhaust and cooling losses also at the same ratio. [•] Globally, one passenger car uses on average of 340l of fuel per year to overcome friction, which would cost 510 euros according to the average European gas price in 2011 and corresponds to an average driving distance of 13,000km/a. [•] By taking advantage of new technology for friction reduction in passenger cars, friction losses could be reduced by 18% in the short term (5–10 years) and by 61% in the long term (15–25 years). This would equal worldwide economic savings of 174,000 million euros and 576,000 million euros, respectively; fuel savings of 117,000 million and 385,000 million liters, respectively; and CO2 emission reduction of 290 million and 960 million tonnes, respectively. [•] The friction-related energy losses in an electric car are estimated to be only about half those of an internal combustion passenger car. Potential actions to reduce friction in passenger cars include the use of advanced coatings and surface texturing technology on engine and transmission components, new low-viscosity and low-shear lubricants and additives, and tire designs that reduce rolling friction. [Copyright &y& Elsevier]

Abstract: Calculations on the global energy consumption used to overcome friction in paper machines in terms of friction in motors, transmissions, pumps, blowers, agitators, pipes and the roll systems are presented. The following was concluded: [–] The energy consumed to overcome friction in a paper mill is in the range 15–25%. [–] Globally there were 8525 paper and paperboard machines in operation in 2012. One paper machine uses on an average 140TJ of electrical energy per year. Of this 32% is consumed to overcome friction, 36% is used for the paper production and mass transportation and 32% is other losses. [–] The friction losses in an average paper machine are in total 44.8TJ per year, and they are distributed as 32% due to friction in water-lubricated sliding in seals, doctor blades and fabric/support contacts, 23% due to friction in elastohydrodynamic rolling contacts, 22% due to friction in elastohydrodynamic rolling–sliding contacts, 15% due to friction in oil-lubricated seals and 8% due to friction in hydrodynamically lubricated contacts. [–] Worldwide 105,000GWh electrical power was used in 2009 to overcome friction in paper machines. This equals to 381,000TJ of annual energy consumption. [–] By taking advantage of new technology for friction reduction in paper machines, friction losses could be reduced by 11% in the short term (about 10 years), and by 23.6% in the long term (20–25 years). This would equal to annual worldwide economic savings of 2000 million euros and 4200 million euros; electricity savings of 36,000 and 78,000GWh; and CO2 emission reduction of 10.6 million and 22.7 million tonnes. Potential mechanisms to reduce friction in paper machines include the use of low-friction and highly durable coatings, surface engineering including texturing, low-viscosity and low-shear lubricants and fluids, novel additives, new materials in seals, doctorblades and fabrics, as well as new designs. [Copyright &y& Elsevier]