Search

Highlights: [•] Advanced and economical production of biobutanol. [•] Continuous two stage fermentation with integrated liquid–liquid recovery technique. [•] Utilization of lignocellulosic sugar mixture (pentoses and hexoses). [•] Long run system operation with high solvent productivity (10.85g/Lh) and yield. [•] Can be integrated to the wood based biorefinery to make it industrially feasible. [ABSTRACT FROM AUTHOR]

Abstract: A process for the fermentative production of propionic acid from whole wheat flour using starch and gluten as nutrients is presented. Hydrolysis of wheat flour starch using amylases was optimized. A batch fermentation of hydrolysate supplemented with various nitrogen sources using Propionibacterium acidipropionici NRRL B 3569 was performed. The maximum production of 48.61, 9.40, and 11.06g of propionic acid, acetic acid and succinic acid, respectively, was found with wheat flour hydrolysate equivalent to 90g/l glucose and supplemented with 15g/l yeast extract. Further, replacement of yeast extract with wheat gluten hydrolysate showed utilization of gluten hydrolysate without compromising the yields and also improving the economics of the process. The process so developed could be useful for production of animal feed from whole wheat with in situ production of preservatives, and also suggest utilization of sprouted or germinated wheat for the production of organic acids. [Copyright &y& Elsevier]

Abstract: The objective of this study was to optimize continuous acetone–butanol–ethanol (ABE) fermentation using a two stage chemostat system integrated with liquid–liquid extraction of solvents produced in the first stage. This minimized end product inhibition by butanol and subsequently enhanced glucose utilization and solvent production in continuous cultures of Clostridium acetobutylicum B 5313. During continuous two-stage ABE fermentation, sugarcane bagasse was used as the cell holding material for the both stages and liquid–liquid extraction was performed using an oleyl alcohol and decanol mixture. An overall solvent production of 25.32g/L (acetone 5.93g/L, butanol 16.90g/L and ethanol 2.48g/L) was observed as compared to 15.98g/L in the single stage chemostat with highest solvent productivity and solvent yield of 2.5g/Lh and of 0.35g/g, respectively. Maximum glucose utilization (83.21%) at a dilution rate of 0.051/h was observed as compared to 54.38% in the single stage chemostat. [Copyright &y& Elsevier]

Abstract: SO2–ethanol–water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79g/l using 4-fold diluted SEW liquor supplemented with 35g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12g/l was obtained at a dilution rate of 0.21h−1. The maximum solvent productivity (4.86g/lh) with yield of 0.27g/g was obtained at dilution rate of 0.64h−1. Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation. [Copyright &y& Elsevier]

Abstract: In present times, the immunosuppressants have gained considerable importance in the world market. Cyclosporin A (CyA) is a cyclic undecapeptide with a variety of biological activities including immunosuppressive, anti-inflammatory, antifungal and antiparasitic properties. CyA is produced by various types of fermentation techniques using Tolypocladium inflatum. In the present review, we discuss the biosynthetic pathway, fermentative production, downstream processing and pharmacological activities of CyA. [Copyright &y& Elsevier]

Abstract: Response surface methodology (RSM) is the most preferred method for fermentation media optimization so far. In last two decades, artificial neural network-genetic algorithm (ANN-GA) has come up as one of the most efficient method for empirical modeling and optimization, especially for non-linear systems. This paper presents the comparative studies between ANN-GA and RSM in fermentation media optimization. Fermentative production of biopolymer scleroglucan has been chosen as case study. The yield of scleroglucan was modeled and optimized as a function of four independent variables (media components) using ANN-GA and RSM. The optimized media produced 16.22±0.44g/l scleroglucan as compared to 7.8±0.54g/l with unoptimized medium. Two methodologies were compared for their modeling, sensitivity analysis and optimization abilities. The predictive and generalization ability of both ANN and RSM were compared using separate dataset of 17 experiments from earlier published work. The average % error for ANN and RSM models were 6.5 and 20 and the CC was 0.89 and 0.99, respectively, indicating the superiority of ANN in capturing the non-linear behavior of the system. The sensitivity analysis performed by both methods has given comparative results. The prediction error in optimum yield by hybrid ANN-GA and RSM were 2% and 8%, respectively. [Copyright &y& Elsevier]

Abstract: In the present work, four strains were screened for schizophyllan production, of which Schizophyllum commune NRCM was selected for further work. The fermentation was carried out for 168h at 28±2°C on an orbital shaker at 180rpm. In the first step, one factor-at-a-time method was used to investigate the effect of media constituents such as carbon and nitrogen sources on schizophyllan production. Subsequently in the second step, concentration of the medium components was optimized using Response Surface Method (RSM). The yield increased from 3.25±0.72g/l in the unoptimized media to 8.03±1.12g/l in the medium optimized by RSM. [Copyright &y& Elsevier]

Abstract: Submerged fermentation was carried out for the production of scleroglucan by Sclerotium rolfsii MTCC 2156 using complex media, such as coconut water, sugarcane molasses and sugarcane juice at 28±2°C and 180rpm for 72h. Sugarcane juice gave maximum scleroglucan production of 23.87g/l as compared to 12.58 and 18.45g/l with coconut water and sugarcane molasses, respectively. Utilization of these substrates would be ecologically sound and economically advantageous. [Copyright &y& Elsevier]

Abstract: Scleroglucan, a neutral homopolysaccaride consisting of a linear chain of β-d-(1-3)-glucopyranosyl and β-d-(1-6)-glucopyranosyl groups, was produced by pure culture fermentation from Sclerotium rolfsii MTCC 2156 by submerged culture. Fermentation process was optimized in two steps. In the first step, one-factor-at-a-time method was used to investigate the effects of medium constituents such as carbon and nitrogen sources. In the second step, concentration of medium components was optimized using an L16-orthogonal array method. In all, 10 different carbon sources and eight different nitrogen sources were evaluated. Maximum yield of 16.58g/l was obtained in a medium containing sucrose as a carbon source and sodium nitrate and yeast extract as nitrogen source. [Copyright &y& Elsevier]

Acetone being a non-fuel solvent produced during the traditional acetone-butanol-ethanol (ABE) fermentation by Clostridium acetobutylicum ; reduces the overall fuel alcohol yield. However, the conversion of acetone into isopropanol has been recommended to improve the process economy. The present study aims to develop an engineered C. acetobutylicum DSM 792 strain to convert acetone into isopropanol by introducing the secondary alcohol dehydrogenase gene from Clostridium beijerinckii NRRL B593 using the allele-coupled exchange approach. Batch and continuous fermentation experiments were carried out with a modified strain C. acetobutylicum DSM 792-ADH to improve the isopropanol yield and titer. The growth and production behavior of the modified strain in stationary flask culture and controlled batch culture was studied. Almost 50% of acetone was converted into isopropanol with highest total solvent yield to be 0.39 g g −1 glucose. The modified strain also utilized sugar mixture and SO 2 –ethanol–water spent liquor as a substrate to produce the solvents. [ABSTRACT FROM AUTHOR]

The co-production of acetone during traditional butanol fermentation (acetone–butanol–ethanol) lowers the yield of alcohol biofuels. The present study was aimed to develop an improved Clostridium acetobutylicum strain with enhanced alcohol fuel production capability. The previously developed IBE (isopropanol-butanol-ethanol) producing C. acetobutylicum DSM792-ADH strain was further optimized to enhance the solvent productivity and yield. Immobilized cell column reactor was used to investigate the effect of dilution rate on IBE fermentation. Pure glucose, artificial sugar mixture and SEW spent liquor from spruce chips were used as substrates to study the behavior of the modified microorganism. The highest total solvent concentrations of approximately 10.60 g l −1 , 10 g l −1 and 6 g l −1 were obtained when glucose, sugar mixture and SEW spent liquor were used as substrates respectively. The modified microorganism could effectively utilize the lignocellulosic biomass hydrolyzate (SEW spent liquor) to yield a solvent productivity of 1.67 g l −1 h −1 . [ABSTRACT FROM AUTHOR]

Highlights: [•] Oil palm empty fruit bunches (OPEFB) are fractionated by SO2–ethanol–water mixture. [•] Fractionation of OPEFB feedstock produces cellulosic fibers and spent liquor. [•] Spent liquor contains dissolved hemicellulose sugars (mostly monomers) and lignin. [•] Fractionation and sugar hydrolysis is hindered by the high cation content of OPEFB. [•] Acidic leaching of OPEFB only partly removes cations; more intense deashing needed. [Copyright &y& Elsevier]

Highlights: [•] A novel modeling approach for Clostridium acetobutylicum solvenotogenic phase is proposed. [•] Continuous fermentation with immobilized cells is studied. [•] The solvent fluxes are predicted quantitatively. [•] A novel optimization procedure is introduced for constraint-based modeling. [ABSTRACT FROM AUTHOR]

The biomass obtained after the extraction of forskolin from the roots of Coleus forskohlii was evaluated as a substrate for the production of acetone-butanol-ethanol (ABE). The spent biomass constituting more than 90% of the raw material showed 50–70% carbohydrates with starch and cellulose being the major constituents. This study was undertaken to optimize enzymatic hydrolysis of C. forskohlii roots for maximum release of fermentable sugars and subsequent fermentation to ABE. The root biomass was hydrolyzed using the Stargen ® 002 and Accellerase ® 1500. Cocktail of both enzymes (16U Stargen ® 002 and 60 FPU Accellerase ® 1500) could produce 41.2 g/l of total reducing sugars (glucose equivalent to 32.33 g/l). The production of ABE was optimized in a batch fermentation using Clostridium acetobutylicum NCIM 2877. The maximum ABE production using the root hydrolysates was 0.55 g/l. Pretreatment with lime and Amberlite XAD-4 increased the production of total solvent to 5.33 g/l. [ABSTRACT FROM AUTHOR]

Highlights: [•] Study suggests the preference of biomass feedstocks appropriate for ABE-fermentation. [•] Effect of varying lignocellulosic sugar concentrations in continuous column reactor. [•] Multi linear regression (MLR) modeling successfully used for continuous production of solvents. [•] Scale up of column reactor is successfully demonstrated. [Copyright &y& Elsevier]