Search

The enzymatic hydrolysis of hardwood and softwood harvest residues treated by SO2-ethanol-water (SEW) fractionation was studied. The target was to convert these fibers with high yield into glucose monomers which could be further converted into biofuel by a subsequent fermentation stage. Hardwood biomass residues were efficiently digested at low enzyme dosage (5 FPU/g cellulose) whereas the softwood residues required notably higher enzyme dosage (20 FPU) for sufficient conversion. However, cellulase dosage of softwood could be reduced mannanase supplementation. Especially the high lignin content of softwood biomass pulps impairs the digestibility and thereby, improved delignification could notably enhance the hydrolysis yields. It was shown that inferior delignification of SW biomass is due to persistent polyphenolic acids present in coniferous bark, whereas no evidence of the negative effect of inorganics and acetone extractives was observed. Additionally, SW hydrolyzate was successfully converted into a mixture of butanol, acetone and ethanol through ABE fermentation. [ABSTRACT FROM AUTHOR]

Highlights: [•] Oil palm empty fruit bunches (OPEFB) are fractionated by SO2–ethanol–water mixture. [•] Fractionation of OPEFB feedstock produces cellulosic fibers and spent liquor. [•] Spent liquor contains dissolved hemicellulose sugars (mostly monomers) and lignin. [•] Fractionation and sugar hydrolysis is hindered by the high cation content of OPEFB. [•] Acidic leaching of OPEFB only partly removes cations; more intense deashing needed. [Copyright &y& Elsevier]

Abstract: SO2–ethanol–water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79g/l using 4-fold diluted SEW liquor supplemented with 35g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12g/l was obtained at a dilution rate of 0.21h−1. The maximum solvent productivity (4.86g/lh) with yield of 0.27g/g was obtained at dilution rate of 0.64h−1. Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation. [Copyright &y& Elsevier]