Search

In this paper, a new switching sequence convex optimization (SSCO) algorithm is proposed for solving non-convex optimization problem with complex time-varying relaxation matrix structures that arises during output feedback design. Firstly, the introduced time-varying relaxation matrix combines the membership functions and the designed switching mechanism to adjust the positive and negative terms of the inequality constraints. As a result, relaxed controller design conditions with complex matrix structures are established. The proposed SSCO algorithm employs switching optimization variables and inner approximation strategy, which is able to compute non-convex optimization problems with complex matrix structures more flexibly and converge quickly. It is worth noting that the implementation of the SSCO algorithm requires a set of strictly feasible initial solutions. Therefore, an initialization iterative algorithm is proposed, which overcomes the difficulties of transforming the solving problem into a typical non-convex optimization problem and linearizing multiple different concave parts, by which a set of optimized feasible solutions are obtained. Finally, simulation examples are used to demonstrate the superiority of the design scheme proposed in this paper. [ABSTRACT FROM AUTHOR]

• A dynamic trade-off between conservatism and complexity is established via a online evaluator. • More efficient fuzzy stabilization conditions are developed in this paper. • The recent multiple-sums-based method is improved evidently in the study. This paper is concerned with the problem of developing more efficient stabilization conditions for discrete-time Takagi-Sugeno fuzzy systems, i.e., not only reducing the conservatism but also (at the same time) alleviating the complexity of fuzzy control synthesis. Firstly, under the framework of traditional fuzzy stabilization, the recent multiple-sums-based method reported in the literature is improved by removing all the redundant variables, and thus the same feasible stabilization range can be obtained at the cost of more economical computational burden. Secondly, in order to further enhance the control efficiency, a dynamic trade-off between conservatism and complexity is established by proposing a new online evaluator of the updated system variation information across two adjacent sampling instants, and thus the so-called resilient stabilization is developed for reducing the conservatism without increasing or even alleviating the complexity. Moreover, all the determined matrices at the farthest sampling instant can be entirely removed without introducing any conservatism due to the proposed substitution technique. Finally, the superiority and effectiveness of our proposed methods are illustrated by a set of simulation comparisons with relevant research results reported in recent literature. [ABSTRACT FROM AUTHOR]

In this paper, a new two-dimensional gaussian hierarchical priority fuzzy system (TGHPFS) is proposed to handle interval-valued data. TGHPFS first performs hierarchical clustering of the average value of interval-valued data in each dimension to generate two-dimensional gaussian membership functions of two-level rules. The two levels of rules are associated by calculating the activation strength of the second-level rules to the first-level rules and setting the connection threshold. The regularized least squares method is used to optimize the consequents of the second-level rules. The two-dimensional gaussian membership function designed in this paper is used to model the antecedents of interval-valued data, solving the correlation problem between the left and right values of interval-valued data. The effectiveness of TGHPFS is validated using real-world datasets, and the proposed method is compared with other latest methods to show the superiority of TGHPFS. [ABSTRACT FROM AUTHOR]

This paper proposes a variable-type hierarchical fuzzy system (VTHFS) with high accuracy and strong interpretability. An improved rear-part direct-connected structure is used in the VTHFS, which eliminates the intermediate variables of the hierarchical fuzzy system (HFS). A new feature sorting method is proposed to find suitable input variables for each layer of subsystems of VTHFS. Under the proposed topology structure, layer by layer training of VTHFS can be achieved by changing the expected output of each layer, thereby reducing residual errors layer by layer and improving the prediction accuracy of VTHFS. Three fuzzy set distribution constraints are used in parameter optimization of VTHFS to improve the interpretability, including integrity, distinguishability, and footprint of uncertainty. The type of fuzzy set is automatically adjusted according to the uncertainty characteristics of input data measured by fuzziness, which further enhances the semantic interpretability of the VTHFS and solves the problem of requiring prior knowledge to define the fuzzy set type in existing research. Finally, the proposed VTHFS is tested on the regression data sets in the real world. Experimental results demonstrate the effectiveness of the feature sorting method and the fuzzy set type adjustment method. Through a large number of quantitative indicators, it can be confirmed that VTHFS has stronger interpretability and higher prediction accuracy compared to other fuzzy systems. [ABSTRACT FROM AUTHOR]

This article is concerned with the problems of high-order moment interval stability/stabilization and observability of stochastic impulsive T–S fuzzy systems (SITSFSs). Firstly, the definition of high-order moment interval stability is proposed of SITSFSs in this paper. In consideration of the connection between pole placement and performance of systems, sufficient conditions for the distribution of the eigenvalues of systems within a defined interval are provided, serving as the criterion for the interval stability in high-order moment of SITSFSs. Different from the general concept of stability, besides determining the stability in high-order moment of the system, high-order moment interval stability can also describe the dynamic performance in high-order moment of systems. Then, the proposed approach in combination with fuzzy control theory provides a reliable and effective method for designing an interval state feedback controller that can ensure the stability of systems and regulate convergence rate of systems. Furthermore, moment observability of SITSFSs has also been addressed in this article. Finally, the numerical simulation verifies the validity and suitability of the proposed method. • A novel 2 p th moment interval stability/stabilization criterion is put forward. • Using the H -representation method, an extended system model is constructed. • A new fuzzy controller design method is proposed to reflect the dynamic and static performances of the system in high-order moment. [ABSTRACT FROM AUTHOR]

This paper proposes a novel gradient-boosting-based ensemble system with a fuzzy regression tree (FRT) as its base component for regression tasks. FRT first initializes the rule space as a whole. In each division round, the rule space is supervised to be divided into smaller subspaces using a novel guaranteed membership division method. The consequent parameters are optimized using fuzzy weighted regularized L2 least squares. The FRT corresponding to the minimum MSE is kept as the initial model for the next division round. The above operation is repeated until the FRT reaches the maximum division rounds. Using gradient boosting to train subsequent FRTs to build hierarchical fuzzy regression tree (HFRT). The HFRT can guarantee the high accuracy while ensuring the low complexity of computation, particularly suitable for solving high-dimensional problems. HFRT performed ablation analysis experiments and compared with state-of-the-art algorithms on 28 data sets. The results confirm the effectiveness of the HFRT. [ABSTRACT FROM AUTHOR]

In this paper, the ability of disturbance rejection is considered for nonlinear systems presented by Takagi-Sugeno (T-S) fuzzy model with time-varying delay. First, a membership function dependent Lyapunov-Krasovskii functional is designed to handle the time-varying delay and an observer-based switching controller is designed to cope with the time derivative of membership function. For each switching signal, an invariant set is estimated corresponding to the switching controller, and the subset of the intersection is also an invariant set if the number of switching is finite with energy bounded disturbance. Then, for the trajectory starting from the origin, the ability of disturbance rejection is measured by H ∞ performance and for other cases, two sets are designed such that any trajectories beginning with the smaller one will remain in the larger one. Finally, the merits of the proposed method are demonstrated by two examples. [ABSTRACT FROM AUTHOR]

This paper investigates the problem of multi-sensors-based security control for Takagi-Sugeno (T-S) fuzzy system over resource-constrained networks. To decrease the effects of resource-constrained networks, a distributed event-triggered scheme and a quantization mechanism are applied to lighten the burden of network transmission. By taking the influences of actuator saturation and denial-of-service (DoS) attacks into consideration, a novel mathematical model for T-S fuzzy system is constructed. Then, sufficient conditions ensuring the exponential stability of T-S fuzzy system are derived by using the Lyapunov stability theory. Moreover, the security controller gains for T-S fuzzy system are obtained by solving a set of linear matrix inequalities (LMIs). Finally, the feasibility of the proposed approach is demonstrated through simulation examples. [ABSTRACT FROM AUTHOR]

Abstract This paper investigates the problem of event-triggered fault detection filter design for nonlinear networked control systems with both sensor faults and process faults. First, Takagi–Sugeno (T–S) fuzzy model is utilized to represent the nonlinear systems with faults and disturbances. Second, a discrete event-triggered communication scheme is proposed to reduce the utilization of limited network bandwidth between filter and original system. At the same time, considering network-induced delays and event-triggered scheme, a novel T–S fuzzy fault detection filter is constructed to generate a residual signal, which has nonsynchronous premise variables with the original T–S fuzzy system. Then, the fuzzy Lyapunov functional based approach and the reciprocally convex approach are developed such that the obtained sufficient conditions ensure that the fuzzy fault detection system is asymptotically stable with H ∞ performance and is less conservative. All the conditions are given in terms of linear matrix inequalities (LMIs), which can be solved by LMI tools in MATLAB environment. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed results. [ABSTRACT FROM AUTHOR]