Search

Abstract: Snow cover is a common and relatively stable land cover condition in winter for cold north regions in China. Snow cover has significant effects on water and heat transfers in frozen soil; it needs to be considered in the study of frozen soil water–heat coupled movements. On the basis of previous research results and physical process analysis of water and heat movements in snow cover and soil, a snow cover–soil union water–heat coupled movements model is established in this paper. The numerical simulation was conducted by using a finite difference method. The results indicate that the simulated values have a similar trend to the measured values and the numerical simulation had big relative errors. However, the average absolute errors of the total and liquid moisture content in frozen soil were all less than 4%, and that of the frozen soil temperature was 1.37 °C. The errors of the numerical simulation were still within the acceptable range. Thus, the snow cover–soil union water–heat coupled movement model constructed in this paper is rational. [Copyright &y& Elsevier]

The hybrid ground-coupled heat pump (HGCHP) systems with supplemental heat rejecter/supplier can effectively solve heat imbalance problems in the subsurface, and consequently improve the operation performance of the geothermal systems. For example, solar energy and/or industrial waste heat may be used as stable heat sources for underground heat storage in northern China with higher heating load, and cooling towers are installed to release heat into the air in southern China, where more cooling demand is needed. This paper reviews and discusses different HGCHP systems, which have been applied in China. And based on the heat transfer model of vertical borehole heat exchangers (BHE) for HGCHP systems, physical and mathematical models of multistage series circuits are developed to illustrate the heat transfer process of the underground thermal storage. A set of parameters, such as borehole spacing, heat recharging rate fractions and thermal properties of soils, which affect the thermal performance of the ground heat exchangers are analyzed, and the optimal solutions are discussed for engineering application. [ABSTRACT FROM AUTHOR]

Abstract: The use of groundwater for cooling and heating purposes is of interest from both the economical and the ecological perspective. The groundwater heat pump (GWHP) system utilizes groundwater as alternative renewable and clean energy source for space heating and/or cooling, withdraws water from a production well, passes it through a heat exchanger and discharges the water into an injection well. By utilizing the relatively stable temperature of groundwater, GWHP system can achieve a higher coefficient of performance. Due to the utilization of groundwater stored in the aquifer, the assessment of the hydraulic capacity of the aquifer based on numerical groundwater models is always needed for the optimum design and the efficient performance of GWHP. In this paper, numerical methods of underground heat-water transfer, energy balance method and thermal storage method were presented to calculate the capacity of unit area of shallow groundwater aquifer. The model results indicate that the numerical method, which is based on performance efficiency of GWHP, represents the behaviour of groundwater pumping/recharging processes, and serves better than energy balance method and thermal storage method, in addition it has been proven itself that this method has the advantages of energy saving and environmental protection. The calculated capacity is positively related to aquifer thickness. It is found that it is easy for ground water recharge in alluvial and pluvial fan located at the piedmont, while the calculated capacity is relatively smaller compared with that of south-east plain where it is not easy for groundwater recharge. [Copyright &y& Elsevier]