Search

Highlights • Graphene composite was used to prepared multilayer structure for microwave absorbing. • The multilayer absorber possesses a gradient index of characteristic impedance. • Characteristic impedance was tailored by graphene content and rod width of unit cell. • The seven-layer absorber achieved an absorption above 90% in 4.5–40 GHz. • 3D printing process was used to fabricate the complex structure. Abstract An ultra-broadband electromagnetic (EM) absorber composed of composite metamaterials was designed, fabricated and characterized. Polylactic-acid/reduced graphene oxide (PLA/RGO) composites with different amounts of RGO were prepared as a primary material collection. To provide good impedance matching and efficient wave attenuation, the multilayer absorbers were designed with a gradient index (GRIN) of characteristic impedance by manipulating the RGO content and the geometric parameters of the unit cell. The absorbers with different numbers of layers were fabricated by a material extrusion process, and then the reflection loss (RL) of the prepared samples was measured. Results showed that the methodology for designing a metamaterial absorber with gradient impedance and fabricating through a 3D printing process was effective in producing ultra-broadband absorbers. The seven-layer absorber achieved an absorption above 90% in a broad bandwidth of 4.5–40 GHz. This work could provide inspiration for upgrading the performance of some conventional absorbing composites through a rational design of the composite proportion and structure. [ABSTRACT FROM AUTHOR]

A gradient-refractive-index radar absorbing structure(GRINRAS) for stealth aircraft is proposed in this paper. It is a layered shell composed of a gradient-refractive-index (GRIN) refractor, an absorber and a reflector. The GRIN refractor consists of the isotropic non-resonant woodpile metamaterials, which was designed according to the permittivity distribution equation of the electromagnetic(EM) black hole to bend and match the waves from the air to the radar absorbing structure. The absorber dissipates the EM waves and transforms them into the heat energy. The reflector reflects the EM waves to the absorber and prevents them from entering the inner space of the structure. A ring and a board GRINRAS were designed, and then fabricated by the three-dimensional (3D) printing process of stereolithography (SL). Simulation and experimental results show that the GRINRASes can control the wave propagation and their absorption capacity is better than −10 dB in the broadband of 12–18 GHz. The GRIN refractor and the absorber have almost equal contributions to the absorption capability. This is the first radar absorbing composite structure composed of the gradient 3D metamaterials. It demonstrates the feasibility of using the metamaterials and 3D printing technology in the innovative radar absorbing structure (RAS) of the stealth aircraft. [ABSTRACT FROM AUTHOR]