Search

Cyclic interactions between rocks and water have general significance and are particularly relevant to engineering failures and geohazards. A comprehensive investigation of the multi-scale deterioration effects and mechanisms of cyclic wetting-drying on rocks can contribute to better engineering applications, but the probabilistic characterization of rock mass properties under cyclic wetting-drying remains a problem due to the difficult-to-test parameters and limited data. Numerous experiments on rock samples of argillaceous siltstone subjected to cyclic wetting-drying of Yangtze River water demonstrate progressive alteration of rock properties on multiple scales, including changes in mineralogy, grain structure, computed tomography, microporosity, and complexity of micropores, with calcite and albite being the most active minerals. The uniaxial compression strength and indirect tensile strength decrease exponentially with the cyclic number, while the Young's modulus increases. Considering the probabilistic characteristics of the geological strength index, the probabilistic mechanical properties of rock mass of studied argillaceous siltstone are then estimated through the generalized Hoek-Brown criterion. The results indicate that the uniaxial compression strength and indirect tensile strength of rock mass both follow lognormal distributions, while the Young's modulus follows a skewed distribution. Long-term strength parameters of rock and rock mass can also be determined as they exhibit exponential trends with the cyclic number. During the cyclic wetting-drying process, the water-rock interactions produce progressive changes in mineral compositions, microstructures, and micropores; with the accumulation of variations of physical properties, defects grow and develop into weak zones, thus the mechanical properties of argillaceous siltstone are significantly weakened. Investigations of the wetting-drying effects on the geological strength index and probabilistic characteristics of rock sample properties are recommended to accurately evaluate rock mass properties affected by cyclic wetting-drying. • Argillaceous siltstone is treated by cyclic wetting-drying of Yangtze River water. • Dissolution of calcite and albite results in the synergistic evolution of rock properties. • Micropores with a diameter greater than 100 μm become predominant. • Probabilistic properties of rock mass strength under cyclic wetting-drying are evaluated. • Long-term strength of the rock mass is evaluated through the exponential fitting. [ABSTRACT FROM AUTHOR]

As a consequence of seasonal variations in groundwater level and reservoir water level, natural rocks generally experience the cyclic wetting-drying process, in which the change in microstructure becomes a critical factor leading to the deterioration of the macro-physical and mechanical properties of rocks. However, it remains a great challenge to quantitatively characterize the microstructures of rock, especially during the wetting-drying process. In this study, a systematic experimental investigation involving multiple techniques (mercury injection capillary pressure (MICP), computer tomography (CT), scanning electron microscope (SEM), and pores (particles) and cracks analysis system (PCAS) software package-based image analysis) were conducted to study the microstructure of sandstone subjected to cyclic wetting-drying. The results show that sandstone experiences increasing microporosity during the cyclic wetting-drying process, with progressive changes in micro grains, defects, and micropore structure and morphology. The pore compositions gradually change into a bimodal distribution with dominating small-medium pores (10 nm-10 μm) and large pores (>10 μm). Eventually, connected crack networks and large-scale fractures develop. There is a strong correlation between the microporosity values evaluated by CT and MICP, indicating the capacity of describing the micropore compositions ranging from 0.03 to 0.78 mm. Besides, comparisons of the three techniques (i.e., MICP, CT, and SEM) and evolution mechanisms of sandstone microstructures are further discussed. • Sandstone microstructures under cyclic wetting-drying are studied via multiple techniques. • Pore area, complexity, and microporosity gradually increase, and defects grow. • Micropores have a bimodal distribution with small-medium pores and large pores being dominant. • Micropores show morphological anisotropy in three dimensions. • CT agrees with MICP in describing micropore compositions ranging from 0.02 to 1 mm. [ABSTRACT FROM AUTHOR]

Most soft interlayers tend to be key factors affecting rock slope stability due to their low strengths. A series of ring shear tests is conducted on reconstituted overconsolidated soft interlayers to investigate the influences of remolded water content and normal stress on shear behavior under drained conditions. The soft interlayer raw samples taken from a potential landslide site in China are first remolded into overconsolidated samples with different water contents but the same dry density and further drained under different normal stresses. The peak strength, residual strength, corresponding shear displacement of the soft interlayers and the loss rate of water content are positively correlated with water content and normal stress. Transformation of strain softening to strain hardening occurs for samples under higher normal stresses. Variations in water contents have notable effects on the shear strengths. Meanwhile, displacements, fragmentations and orientations of samples differ, showing strain softening and hardening behaviors of soft interlayers. • Stress-strain characteristics of soft interlayers are systematically investigated. • Ring shear test is utilized successfully for shear behavior studying. • Variation in compaction moisture content has an obvious effect on shear strength. • Shear behaviors are closely related to the microstructure of soft interlayers. [ABSTRACT FROM AUTHOR]