Search

The health risks associated with exposure to respirable dust in coal mines have been attracted much attention by an increasing number of researchers. However, the accurate identification of potentially hazardous agents in respirable dusts and the evaluation of the potential health risks arising from it still remains controversial to varying degrees. A comprehensive understanding of the physicochemical properties of respirable dust is a prerequisite and an important basis for resolving this controversy. Therefore, in this study, the particle size distribution and morphology, pore structure, mineralogical and geochemical patterns, and oxidative potential (OP) of respirable coal mine dust were comprehensively investigated. Stepwise multiple linear regression was employed to identify dust components driving OP, such as anatase, tobelite, quartz, and ankerite, in respirable coal mine dust, along with Na, Ni, Se, W, and As. On this basis, we performed a single-factor risk prediction for different coal mines by considering factors that may impact miners' health, with the analyses yielding somewhat contradictory results. Therefore, a multifactor integrated prediction model is proposed using an entropy-based technique for order preference by similarity to the ideal solution to categorize coal mines in the study area into three risk categories, high-, medium-, and low-risk dust mines, which is important for the hierarchical classification and control of coal mines and for formulating appropriate dust prevention and control measures. [Display omitted] • A comprehensive investigation of the physicochemical and oxidative potential characteristics of respirable coal mine dust (RD). • Stepwise multiple linear regression was employed to identify the potentially hazardous agents of RD. • The TOPSIS was used to comprehensively evaluate health risks in various coal mines and sites within those mines. [ABSTRACT FROM AUTHOR]

This paper investigates the mineralogical and geochemical compositions of the Late Permian coals in the Liulong Mine, Liuzhi Coalfield, Western Guizhou Province, China, by using XRD, SEM-EDX, ICP-AES and ICP-MS. Both the No.3 and No.7 Coals are classified as low volatile bituminous coal. However, the No.3 Coal is a medium-ash (29.8% on average) and high-sulfur (4.76% on average) coal while the No.7 Coal is a low-ash (12.4% on average) and medium-sulfur (2.16% on average) coal. Major minerals in both coal seams include quartz, pyrite, marcasite, kaolinite, calcite, and to a lesser extent, gypsum and anatase. Illite, chlorite, rectorite, albite, ankerite and siderotil are only present in the No.3 Coal. The No.3 Coal contains higher elemental concentrations than the No.7 Coal probably due to the higher mineral contents in the No.3 Coal, and is enriched in Nb and Ta, and to a lesser extent in K, Ti, Li, V, Co, Cu, Sr, Zr, Mo and Ba. The mineralogical and geochemical data presented in this study have shown that the No.3 Coal was formed under a higher degree of marine-influenced coal-forming environment than the No.7 Coal. However, the both Coals have the Kangdian Upland (made of mafic igneous rocks, such as basalt rocks) as sediment-source region like other coals from Guizhou Province. Three geological factors control the geochemical patterns of the No.3 and No.7 Coals, namely: (1) the high detrital input in the No.3 Coal causing high ash yields; (2) the sediment-source region (Kangdian Upland basalt) causing high Ti, Nb and Ta contents, and a minor proportion of Co, Cr, V and Cu, when combined with the high detrital input in the No.3 Coal; (3) the higher degree of marine influenced depositional environment in the No.3 Coal causing a high S, Sr and Ba contents. [ABSTRACT FROM AUTHOR]

Oxidative potential (OP) is considered to be an efficient indicator of particulate matter (PM) to induce oxidative stress in the lungs and is increasingly considered to be a relevant health metric. In this study, two complementary OP assays were deployed, including dithiothreitol (DTT) and ascorbic acid (AA) assays, to investigate the potential toxicity (as generators of oxidative stress) of respirable fractions (DD4, < 4 μm) of deposited dust (DD500, < 500 μm) in underground low-S and low-pyrite coal mines in Henan Province, Central China. The OPDTT of DD4 is higher than that reported for other types of atmospheric PM, whereas the OPAA of DD4 is similar and/or slightly higher. Cross-correlation and multilinear regression analyses are applied using datasets of major mineral and geochemical patterns in the DD4 samples and the respective OP values to identify the major drivers for OP in respirable coal dust. Thereafter, the patterns of DD4 are compared with those of DD500 and the parent coals to determine the sources of OP-relevant substances. OPDTT is mainly governed by some trace elements (Sb, As, Li, B, Sr, and Pb) and minor minerals (anatase, quartz, siderite), and their synergistic effect may be one of the reasons for the high DTT consumption. For OPAA, quartz, total clay (sum of illite, kaolinite, tobelite, and clinochlore) and Ni, Cr, Co, Si, and S, play an important role in regulating the OPAA of pyrite-free DD4 samples. These OP-relevant substances have three sources: coal dust, which has a similar composition in DD4, DD500, and the parent coal (such as siderite and its associated elements); gangue dust, which does not occur in the parent coal but is widely detected in DD4 and DD500 (such as quartz, kaolinite, and relevant elements); and cement dust (from gunite galleries), which is mainly calcite- and calcite-associated elements. • A study of the mineralogy, geochemistry and OP of deposited dust, respirable dust and coal in underground coal mines. • OPDTT of size-segregated respirable dust (DD4) is mainly governed by anatase, siderite, quartz, and Sb, As, Li, B, Sr, Pb. • OPAA of DD4 is regulated by anatase, tobelite, kaolinite, and total clay, as well as Ni, Cr, Co, Si, and S. • The parent coal dust, gangue dust, and cement dust are the primarily source of these hazardous materials. [ABSTRACT FROM AUTHOR]

Abstract: The Yimin Ge-coal deposit, located in the Yimin coalfield, Inner Mongolia, is the third largest Ge-rich coal deposit in China just after the Lincang and Wulantuga Ge-coal deposits. Based on the coal and non-coal samples recently collected from the Wumuchang coal mining district in the Yimin Ge-coal deposit, this paper reports some new data on the mineralogical and geochemical characteristics of the Yimin high-Ge coals, and provides some new evidence for the possible mode of Ge enrichment in the Yimin coals. Mineralogical analyses were performed by means of Powder X-ray diffraction (XRD). Major and trace element concentrations were determined by inductively coupled plasma atomic-emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS), respectively. Element affinities were determined by Pearson's correlation analysis. The studied coals fall within the coal rank between sub-bituminous A and high volatile bituminous C, with relatively high moisture content, high volatile matter yield and low to medium ash yield. Quartz and kaolinite are the main mineral matters in the Yimin coals, with small amounts of pyrite and traces of microcline. Common pyrite and As-bearing pyrite occurring in the Yimin coals show an epigenetic origin. The epigenetic precipitation of kaolinite, quartz and As-rich pyrite (with Ge, and other trace elements) in the Yimin coal fractures may be caused by activities of both hydrothermal and low temperature fluids. Compared to common Chinese and worldwide coals, the Yimin coals are markedly enriched in Ge (43mg/kg), As (155mg/kg), and W (9.84mg/kg) and slightly enriched in Pb (22mg/kg) and Hg (0.24mg/kg). Most of the elements (e.g. Al, K, Sc, Ti, V, Cu, Ga, Sn, Th and REEs) in the studied coals present an aluminosilicate affinity as deduced from their obvious positive correlation with Al and ash yields. High correlation coefficients of As and Hg with Fe and S indicate a sulfide affinity of these elements in the Yimin coals. Germanium, B, Mo, and W in the studied coals show an organic affinity and a partial sulfur affinity as deduced from their negative correlation with Al and positive correlation with S, respectively. The preliminary and possible model for Ge enrichment in the Yimin Ge-coal deposit was that Ge was carried by hydrothermal fluids and then these fluids were incorporated in the water existing in the upper porous conglomerates and percolate in the top of the coal seam, where Ge was trapped by organic matter and finally enriched in an early diagenetic stage (humification–gelification). [Copyright &y& Elsevier]

Abstract: The mineralogical and geochemical characteristics of the Late Permian Huayingshan coals, partings, roof and floor strata, as well as lutitic rocks from the Longtan Formation, in Sichuan Province, southwestern China, were investigated in this study. The Huayingshan low volatile bituminous coals are characterized by relatively high mineral contents (mainly kaolinite, quartz, pyrite, and calcite). The concentrations of most trace elements are relatively high compared with other Chinese and world coals. The coals and associated strata show similar element affinities: Al, Ti, Li, Ta, Th, Ga, U, Sn, Sc, Cr, Cu, Rb, Co, and Se probably have an aluminosilicate affinity; Zr, Nb, Hf, Y, REEs, and U probably result from the occurrence of heavy minerals such as zircon; S, Fe, W, and Rb mainly have a sulfide affinity; Ca, Sr, and Mn mainly have an carbonate affinity. The high enrichment in the Huayingshan coal of Zr, Nb, Hf, REEs, Ta, Ga, and Th is caused by a geochemical anomaly in the source of this coal''s detrital material (and probably also by input of volcanic ash), which is influenced by the alkaline volcanic magmas of the Emeishan basalt. The Zr/Hf, Zr/Nb, Zr/La and Zr/Th ratios support the volcanic origin of such a geochemical anomaly. [Copyright &y& Elsevier]

Abstract: The Zhundong coalfield is a very large coal deposit, currently under exploration, and promises to be an important coal mining resource in Western China. The coal reserves amount to 164Gt. At Xiheishan and Wucaiwan, the coal-bearing units are the Badaowan (Lower Jurassic) and, especially, the Xishanyao formations (Middle Jurassic). These contain from one to 31 coal seams (one to 10 workable coals reaching the rank of high volatile A bituminous) with an accumulated workable coal thickness of 20–87m. These recently explored coal reserves are of a high quality and are characterized by low ash, aluminum, iron, sulfur, and trace element contents. The minerals present in this coal are mainly quartz, kaolinite, siderite, and pyrite. The trace element contents in both Xiheishan and Wucaiwan coals are much lower when compared with the usual concentration ranges present in Chinese coals, with the exception of Ba and Sr. Thus, Ba contents in Xiheishan coal are higher than Swaine''s worldwide concentration range. A large number of elements have mainly aluminosilicate affinity, and occur in clay and other detrital coal minerals. Ca and Mn have mainly carbonate affinity; Fe and S have mainly sulphide affinity in Wuchaiwan coal. In Xiheishan, Fe, Mn and Mg have mainly carbonate affinity (siderite), and probably, B, Co, Ni and S have an organic affinity. Thus, the Zhundong coalfield contains coal with a very high quality and very low levels of impurities. The very low ash yields, S, Fe, and trace element contents may be attributed to the sedimentological setting, with intensive peat bog aggradation in a very shallow lake environment with a low detrital supply. The very low sulfur content, the relatively high Ba-sulfate (barite) content and the high siderite occurrence in Xiheishan coal (in contrast to the pyrite occurrence in Wucaiwan coal) may be attributed to the rapid aggradation of peat with the consequent oxidation and leaching of minerals, elements, and degradation of organic components. Under this scenario, sulfate is trapped by the continuous precipitation and accumulation of barium sulfate (very low soluble). [Copyright &y& Elsevier]

This study systematically investigates the mineralogical and geochemical variations in parent coal, coal gangue (roof, parting, and floor), deposited coal mine dust (DD), and respirable fractions of DD (RD) in an underground coal mine using the blasting mining method in China to evaluate the major sources of DD. The emission of dust in this study is affected by coal gangue sources during the mining process, which causes different geochemical patterns in the DD samples. Moreover, weathering of the cement gunite walls plays an important role in the enrichment of specific elements in the DD from air uptake and air out galleries. Furthermore, the spatial variation in RD characteristics, including mineralogy, geochemistry, and oxidative potential (OP), is discussed, with emphasis on the major health-relevant species and elements. Organic species from coal dust seem to be the essential components contributing to OP rather than metals, although some metals (e.g., Cr, Co, Ge, Se, Zn, Ba, Rb, Cs, Sn, and Pb) influence OP to some degree. [Display omitted] • Deposited coal mine dust, parent coal, and gangue in an underground coal mine using blasting mining method were studied. • Gangue and cement dust mixed into coal dust result in the enrichment of abundant elements. • The primary species driving the oxidative potential are site-dependent. • Organic species, quartz, calcite, and Cr, Co, Ge, Zn, Ba, Rb are highly correlated with toxicity. [ABSTRACT FROM AUTHOR]

Abstract: This paper deals with the study of the Late Permian coal deposits from Chongqing and south-eastern Hubei mining districts and of the Late Triassic coal deposits from Chongqing mining district. The Late Permian coals are characterized by relatively high amount of sulphide, sulphate and carbonate minerals and by a high total content of trace elements (with respect to the Late Triassic coals) due to the marine influence on the depositional environment. The Late Permian Chongqing and the southeastern Hubei coals showed similar geochemistry and mineralogy. However, there were some differences due to the different source rock and magmatic influence on Hubei coals. The concentrations of most trace elements in the Late Triassic coal were relatively low when compared with the usual range of the worldwide concentrations. By contrast, the contents of Ta, Se, Nb, Sc, Hf, Tl, Bi, Cu, V and Zn in the Late Permian Chongqing and Southeastern Hubei coals were higher than the usual range. Differences in occurrence of major and trace elements were found between Late Permian Hubei and Chongqing coals. Thus, most of the trace elements investigated presented an aluminosilicate association, followed by sulphide–arsenide (Fe, S, As, Pb, Mo, Ni and Co, in most cases) and carbonate (Ca and Mg) affinities in both areas. However, there was an important phosphate and zircon association in the Chongqing coal, whereas the carbonate association was significantly influenced by magma in the coals from Hubei. In the Late Triassic coal most of the major and trace elements investigated occur in aluminosilicate associations, with the exception of S, Fe, Ca, Mn, Sr, Sn, Ba, Nb, Mo, Mg, Co and Ta, with carbonate, sulphate and sulphide affinities. [Copyright &y& Elsevier]

This paper represents the first integrated research on the mineralogical, geochemical and stable isotope characteristics of the Upper Triassic high‑sulfur coals from the Khanh Hoa open-pit mine, Thai Nguyen Coalfield, NE Vietnam. Formed in a marine-influenced carbonate succession, the Khanh Hoa coal is characterized by medium ash yield, low volatile matter yield, and high sulfur content. Minerals in the Khanh Hoa coal are predominantly composed of authigenic calcite in the upper portion; and pyrite, quartz, with minor amounts of tobelite ([(NH 4), K] (Si, Al) 4 Al 2 O 10 (OH) 2), gypsum in the middle and lower portions. The high‑sulfur Khanh Hoa coal is enriched in an As-Mo-Sb-U-Cs-P assemblage, which presents both an organic and inorganic mode of occurrence, and is largely ascribed to hydrothermal fluids. The δ 13C values of the Khanh Hoa coal range from −24.77‰ to −22.80‰ (avg. −23.33‰), reflecting a change in sedimentation pattern (from transgressive to high stand system upwards). The δ 15N values of the Khanh Hoa coal range from 2.41‰ to 3.73‰ (avg. 3.30‰), possibly resulted from influenced by seawater influence and a redox environment. The mineralogical, geochemical and isotopic characteristics reflected that the high‑sulfur Khanh Hoa coal was formed/preserved in marine-influenced anoxic environment, with low detrital input, and strong activities of multi-stage hydrothermal solutions. [ABSTRACT FROM AUTHOR]

Coal mining in China is continually increasing, and the associated emitted coal mine dust is of growing environmental and occupational concern. In this study, deposited coal mine dust (DD) was analysed in three different regions of an active, highly-volatile bituminous open-pit coal mine in the Xingjian Province, Northwest of China: coal working fronts, tailings handling sites, and road traffic sites. Samples were analysed for particle size, and geochemical and mineralogical patterns, and then compared with the respirable DD fractions (RDDs, <4 μm) separated from DD samples. Online measurements of ambient air concentrations of particulate matter (PM 10 and PM 2.5), black carbon (BC) and ultrafine particles (UFP) were performed in the same mine zones where DD was sampled. Furthermore, the RDD samples were subjected to analysis of specific biological response or toxicological indicators (oxidative potential, OP). The results demonstrated: i) large differences in particle size and composition among DD from tailings handling, road traffic and coal working front sites, ii) a strong influence of the DD moisture contents and ash yields on particle size, and, accordingly, on the potential dust emissions, iii) an enrichment of multiple elements (such as Nb, Th, Cr, Sr, Li, As, Pb, Cu, Zr and Ni) in the RDD from coal working fronts compared with their contents in the worked parent coal seams, mostly attributed to mining machinery, tyre and brake wear emissions and to deposition of dust emitted from gangue working zones, iv) low OP values of the RDD emitted from the studied mine, which works a high-quality coal, with OP being influenced by Mn, sulphate and anatase (TiO 2) contents, and v) the impact of specific mining operations and mine areas on the levels of air pollutants, such as high PM from tailings handling in the upper parts of the mine or the high UFP levels in the bottom of the mine (due to vehicle and machinery emissions and lower dispersive conditions). The data presented here demonstrate the necessity of extracting the more deeply respirable size fraction of coal mine dusts in future studies on the health effects of these materials because this finer fraction is mineralogically and geochemically different from the parent rocks. • High impact of specific mining operations in ambient air pollutants. • Particle size distribution of deposited dust (DD) was different over mine sites. • Moisture and ash have strong influence on respirable DD (RDD) emissions. • Enrichment of multiple elements in RDD attributed to mining activities. • Oxidative potential of RDD is influenced by Mn, sulphate and anatase contents. [ABSTRACT FROM AUTHOR]

• Respirable fraction of dust deposited inside coal mines was extracted and analysed • Respirable coal dust is enriched in minerals related to parent coal geochemistry • Deposited coal mine dust can be used as a proxy for the geochemistry of PM10 • Fe, Si, Mn, Ba and particle size of coal dust are highly correlated with toxicity We focus on a comparison of the geochemistry and mineralogy patterns found in coal, deposited dust (DD), respirable deposited dust (RDD) and inhalable suspended dust (PM10) from a number of underground mines located in China, with an emphasis on potential occupational health relevance. After obtaining the RDD from DD, a toxicological analysis (oxidative potential, OP) was carried out and compared with their geochemical patterns. The results demonstrate: i) a dependence of RDD/DD on the moisture content for high rank coals that does not exist for low rank coals; ii) RDD enrichment in a number of minerals and/or elements related to the parent coal, the wear on mining machinery, lime gunited walls and acid mine drainage; and iii) the geochemical patterns of RDD obtained from DD can be compared with PM10 with relatively good agreement, demonstrating that the characterization of DD and RDD can be used as a proxy to help evaluate the geochemical patterns of suspended PM10. With regards to the toxicological properties of RDD, the Fe content and other by-products of pyrite oxidation, as well as that of anatase, along with Si, Mn and Ba, and particle size (among others), were highly correlated with Ascorbic Acid and/or Glutathione OP. [ABSTRACT FROM AUTHOR]