Search

Abstract: Although the thermal bridge effects on the building energy performance have been presented in the literature, the multidimensional hygrothermal analysis of the building envelope is still a challenge due to many difficulties such as modeling complexity, computer run time, numerical convergence and highly moisture-dependent properties. However, their effects are of paramount importance due to the local increase of heat and mass flux densities so that moisture can be easily accumulated around internal corners, increasing mold growth risk and causing structural damage. Therefore, for analyzing the effects of building lower and upper corners, a multidimensional model has been developed to calculate the coupled heat, air and moisture transfer through building envelopes. The algebraic equations are simultaneously solved for the three driving potentials — temperature, vapor pressure and gas pressure gradients — to improve the numerical stability of the discretized model. In the Results section, the coupling of the upper corner, wall, lower corner (with different types of foundations), ground and floor are analyzed in terms of temperature and relative humidity profiles, vapor flow and heat flux, showing the importance of a detailed hygrothermal analysis for accurately predicting building energy consumption, mold growth and structural damage risks. [Copyright &y& Elsevier]

Abstract: Combined multidimensional analysis of heat, air and moisture transport through porous building elements is barely explored in the literature due to many difficulties such as modeling complexity, computer run time, numerical convergence and highly moisture-dependent properties. In this way, a mathematical model considering a combined two-dimensional heat, air and moisture transport through unsaturated building upper corners is presented. In order to improve the discretized model numerical stability, the algebraic equations are simultaneously solved for the three driving potentials: temperature, vapor pressure and moist air pressure gradients. In the results section, the convective effects caused by air stagnation are analyzed in terms of heat flux and mould growth risk for different boundary conditions, showing the importance of a detailed hygrothermal analysis – which is normally disregarded by simulation tools – for accurately predicting building energy consumption, indoor air quality, thermal comfort or mould growth risk. [Copyright &y& Elsevier]

Abstract: Due to the lack of building simulation programs that can simulate in details the combined heat, vapor and liquid transfer in porous elements and the HVAC systems, a generic and flexible computational algorithm has been elaborated in order to integrate models for both HVAC systems and multizone building hygrothermal model. In the algorithm, models for the primary components (chiller, cooling tower, primary pumps and condensation pumps) and for the secondary components (cooling and dehumidifying coil, humidifier, fan and mixing box) have been presented. Those mathematical models have been integrated into a whole-building simulation model, allowing to perform whole-building hygrothermal simulation combined to HVAC systems and plant simulation. The building hygrothermal model is based on the simultaneous calculation of temperature and moisture content distributions within the porous envelope taking into account both vapor diffusion and capillary migration. First, results are presented for a multizone building to show the usability of the proposed algorithm. Then, the analysis of the influence of the adsorption and desorption phenomena on the calculation of thermal loads and energy consumption is presented, showing that the disregard of moisture may oversize the HVAC system in 13% and underestimate the cooling energy consumption in 4% for the case study defined in this paper. [Copyright &y& Elsevier]

Abstract: In order to precisely predict ground heat transfer, room air temperature and humidity, a combined model has been developed and conceived to calculate both the coupled heat and moisture transfer in soil and floor and the psychrometrics condition of indoor air. The present methodology for the soil is based on the theory of Philip and De Vries, using variable thermophysical properties for different materials. The governing equations were discretized using the finite-volume method and a three-dimensional model for describing the physical phenomena of heat and mass transfer in unsaturated moist porous soils and floor. Additionally, a lumped transient approach for a building room and a finite-volume multi-layer model for the building envelope have been developed to integrate with the soil model. Results are presented in terms of temperature, humidity and heat flux at the interface between room air and the floor, showing the importance of the approach presented and the model robustness for long-term simulations with a high time step. [Copyright &y& Elsevier]

A precise hygrothermal model is essential to predict the energy performance of building envelopes providing coupled transport of mass (moisture and air) and heat through porous elements, considering phase change and all heat transfer modes, including the radiative transfer through fibrous materials. Therefore, a new mathematical model, called CAR-HAM (Conductive, Advective, and Radiative Heat, Air and Moisture), is proposed to include the radiative transfer equation to calculate the thermal radiation effects within the porous materials to be taken into account in the energy balance. The moisture and the energy conservation equations are simultaneously solved using a fully implicit scheme and the MTDMA algorithm. The comparison of the proposed model considering some case studies such as attic insulation, bar drying, convection and high humidity (rain load) - showed a good agreement with experimental data available in the literature. [ABSTRACT FROM AUTHOR]

This paper presents a practical application of the concept of Optimal Experiment Design (OED) for the determination of properties of porous materials with in situ measurements and an identification method. First, an experimental set-up was presented and used for the measurement of relative humidity within a wood fibre material submitted to single and multiple steps of relative humidity variation. Then, the application of OED enabled to plan the experimental conditions in terms of sensor positioning and boundary conditions out of 20 possible designs. The OED search was performed using the Fisher information matrix and a priori knowledge of the parameters. It ensures to provide the best accuracy of the identification method and thus the estimated parameter. Optimal design results have been found for single steps from the relative humidity ϕ = 10–75%, with one sensor located at the position X between 4 and 6 cm, for the estimation of moisture permeability coefficients, while from ϕ = 75 % to ϕ = 33 % , with one sensor located at X ∘ = 3 cm , for the estimation of the advection coefficient. The OED has also been applied for the identification of couples of parameters. A sample submitted to multiple relative humidity steps ( ϕ = 10–75–33–75%) with a sensor placed at X ∘ = 5 cm was found as the best option for determining both properties with the same experiment. These OED parameters have then been used for the determination of moisture permeability and advection coefficients. The estimated moisture permeability coefficients are twice higher than the a priori values obtained using standard methods. The advection parameter corresponds to the mass average velocity of the order of v = 0.01 mm / s within the material and may play an important role on the simulation of moisture front. [ABSTRACT FROM AUTHOR]