Search

Deep-seated mudstone landslides are widely distributed in northwest China. The Zhengjiamo landslide occurred in 734 CE near Taijing, Tianshui region. It was triggered by the main shock of the historical Ms = 7.0734 CE earthquake. The earthquake also induced a wide range of landslides in this area, with hundreds of fatalities and many houses destroyed by landslide debris. Based on a detailed field survey, borehole data, and mapping, a detailed geological reconstruction of the slope was achieved and the geo-mechanical features of the claystone involved in the landslide were obtained. Using the Particle Flow Code to simulate the mechanism of the Zhengjiamo landslide, the features of the landslide dynamics were obtained using a 5-stage model. During the landslide process, the slip mass at the front and upper edges exhibited higher mobility than at the rear and bottom edges. Furthermore, the contact bond strength of the sliding body gradually weakened. The model indicates that the particle bond strength has a larger influence on the maximum runout distance and landslide debris morphology than the type of weak intercalated layers. The slip mass presented a rotational slide pattern and remained on the slip plane throughout the sliding process. Finally, the earthquake uplifted the slope toe, which prevented the slip mass from gliding. The modelled scenario provided a reasonably good fit to the actual topography, verifying the modelling results. After the historical earthquake, with the clay minerals swelling and shrinking under rainfall and efflorescence conditions, the structure of the soft rock changed, contributing to the weakening of the sliding rock mass. The landslide gradually crept and evolved to its current topography. [ABSTRACT FROM AUTHOR]

Dynamic behavior and failure mechanism of slope during earthquake are hot topics in geotechnical engineering community. In Tianshui area, Northwest of China, the deformation features of loess-mudstone slopes induced by earthquakes are still not well understood. The current study aims to discuss the dynamic behavior of the slope under earthquake, by performing a series of centrifuge shaking table tests and numerical simulations. The results are processed for PGA amplificatory effect study and to evaluate the earthquake induced deformation mechanism. Better agreement is obtained between the results of numerical simulations and centrifuge tests. The results indicated that the acceleration response of the loess-mudstone slope showed several amplifying characteristic: the height effect, lithologic effect and surface effect. It also proves that the displacements in the loess layer are much larger than mudstone. As the input amplitude increased, the shear plastic zone developed along a further slide surface. Tension plastic zone mainly occurred at the crest. Roughly, the regions of earthquake induced deformation state increased with the increase in amplitude of earthquake wave. Deformations occurred at the upper part of the slope. Tensile cracks evolved on the crest and the upper part of slope in loess layer, moreover, failures occurred at slope surface, and only slight deformation at slope toe. Deformations with continuous shear cracks and slope surface upheavals developed at the middle part of slope. [ABSTRACT FROM AUTHOR]