Search

Functionalization of catalytic nanoparticles (NPs) on semiconductor metal oxide (SMO) sensing layer is an indispensable process to obtain improved sensitivity and selectivity for high performance chemical sensors. It is a critical challenge to achieve homogeneous distribution of nanoscale catalysts on SMO in consideration that gas sensing characteristics of SMO-based sensing layer are significantly influenced by the size and distribution of catalysts. Here, we propose a highly effective functionalization method to achieve well-distributed catalytic NPs onto one dimensional (1D) SMO nanofibers (NFs) using protein cage templates: apoferrtin. By simply replacing precursor in the apoferritin assisted method, not only precious catalyst such as Pt but also non-precious catalysts such as La and Cu were successfully synthesized in nanoscale ( i.e. , 3–5 nm). Furthermore, the apoferritin-encapsulated catalysts exhibited high dispersion property due to repulsive force between protein shells. For this reason, catalytic NPs were homogeneously decorated on ZnO NFs after electrospinning followed by calcination. Catalytic Pt NPs and Cu NPs functionalized ZnO NFs exhibited approximately 6.38-fold (R air /R gas = 13.07) and 2.95-fold (R air /R gas = 6.04) improved acetone response compared with the response (R air /R gas = 2.05) of pristine ZnO NFs. In the case of La NPs functionalized ZnO NFs, 9.31-fold improved nitrogen monoxide response (R air /R gas = 10.06) was achieved compared with the response of pristine ZnO NFs. The four catalyst-ZnO composite NFs successfully distinguished simulated breath components such as acetone, toluene, nitrogen monoxide, carbon monoxide, and ammonia with well-classified patterns by principal component analysis (PCA). This work demonstrated a robustness of synthetic and functionalization method using bio-inspired protein templates combined with electrospinning technique and a promising potential of using non-precious catalysts to establish diverse sensing material libraries that can be applicable to breath pattern recognition for diagnosis of diseases. [ABSTRACT FROM AUTHOR]

In this work, a novel catalytic synthesis and functionalization method using apoferritin is used to fabricate RuO 2 nanoparticles (NPs) loaded WO 3 nanofibers (NFs) for potential diagnosis of diabetes. Catalytic ruthenium (Ru) NPs with very small average diameters of 1.8 ± 0.9 nm were synthesized using apoferritin which is a hollow protein cage, and were easily functionalized on WO 3 NFs by introducing electrospinning solution with W precursor and polyvinylpyrrolidone (PVP). As-spun Ru NPs-loaded W precursor/PVP composite NFs were calcined at 600 °C for 1 h in air atmosphere to achieve RuO 2 -functionalized WO 3 NFs. The small size and uniform distribution of catalytic RuO 2 NPs were well maintained due to hollow nature of apoferritin cages after calcination. The chemo-resistive sensors using RuO 2 -functionalized WO 3 NFs showed significantly enhanced acetone (CH 3 COCH 3 ) sensing response (R air /R gas = 78.61–5 ppm), which was 7.4 times higher than the response (R air /R gas = 10.61–5 ppm) of pristine WO 3 NFs at highly humid atmosphere (95% RH). In addition, the RuO 2 -functionalized WO 3 NFs showed outstanding selectivity toward acetone gas in comparison with other gases such as hydrogen sulfide (H 2 S), toluene (C 6 H 5 CH 3 ), ethanol (C 2 H 5 OH), pentane (C 5 H 12 ), ammonia (NH 3 ), hydrogen (H 2 ), and water vapor (H 2 O) at 5 ppm. These results represent potential feasibility for the detection of acetone in exhaled breath for diagnosis of diabetes. [ABSTRACT FROM AUTHOR]

In this work, catalytic Rh 2 O 3 -functionalized WO 3 nanofibers (NFs) were synthesized via an electrospinning route and used as a highly selective acetone-sensing layer for potential diagnosis of diabetes. Catalytic rhodium nanoparticles (Rh NPs) with average diameters of 5.0 ± 0.52 nm, which were synthesized by the polyol process, were dispersed in water with W precursor and poly(vinylpyrrolidone) (PVP) for electrospinning. As-spun Rh NP-loaded W precursor/PVP composite NFs were calcined at 600 °C for 1 h in air atmosphere to achieve Rh 2 O 3 -decorated WO 3 NFs. Microstructure evolution and chemical composition of Rh 2 O 3 -decorated WO 3 NFs as a function of Rh-loading amounts, i.e., 0.01 wt%, 0.05 wt%, 0.10 wt%, and 0.15 wt%, were examined using energy-dispersive X-ray spectroscopy (EDS), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM). The mean size (30 nm) of the WO 3 crystallites in Rh 2 O 3 -decorated WO 3 NFs was much smaller than that (60 nm) of the WO 3 crystallites in pristine WO 3 NFs. The Rh 2 O 3 -decorated WO 3 NFs showed outstanding acetone (CH 3 COCH 3 ) sensing response ( R air / R gas = 41.2 to 5 ppm), which was 4.6 times higher than the response ( R air / R gas = 9.0 to 5 ppm) of pristine WO 3 NFs at highly humid atmosphere (95% RH). In addition, superior acetone cross-sensitivity of the Rh 2 O 3 -decorated WO 3 NFs was observed in other interfering gases such as pentane ( n -C 5 H 12 ), ammonia (NH 3 ), toluene (C 6 H 5 CH 3 ), carbon monoxide (CO), and ethanol (C 2 H 5 OH) at 5 ppm. These results are highly promising for the accurate and selective detection of acetone in exhaled breath for potential diagnosis of diabetes. [ABSTRACT FROM AUTHOR]