Search

Sb 2 Se 3 , an emerging promising binary compound semiconductor, was prepared at different substrate temperatures by pulsed laser deposition for thin film solar cells for the first time. In this work, CdS and Sb 2 Se 3 films were subsequently deposited by pulsed laser deposition to simplify the process. Film properties and device performance, closely related to the substrate temperature, were characterized by thermal gravimetric analysis, X-ray diffraction, UV–Vis–NIR spectrophotometer, scanning electron microscope, light and dark current density-voltage, external quantum efficiency and capacitance-voltage, respectively. Results indicate that Sb 2 Se 3 solar cells film deposited at 500 °C is better, with a better efficiency of 3.58%. Furthermore, SnO 2 high resistive layer was introduced into Sb 2 Se 3 solar cell to improve the junction quality, leading to a champion device efficiency of 4.41%. Image 1 • CdS/Sb 2 Se 3 bilayer was deposited by pulsed laser deposition for the first time. • Effects of substrate temperature on film properties and device performance were studied. • Sb 2 Se 3 film deposited at 500 °C is more suitable for Sb 2 Se 3 solar cells. • Champion efficiency of 4.41% was achieved due to the insertion of SnO 2 layer. [ABSTRACT FROM AUTHOR]

Sb 2 Se 3 , a very promising absorber layer for thin film solar cells, has attracted more and more attention because of its special structural and optical properties. In this work, pulsed laser deposition (PLD), a simple and effective technique, was used to deposit CdS/Sb 2 Se 3 solar cells for the first time. Results show that the grain size is 200–250 nm, the bandgap is calculated to be 1.21 eV and Sb 2 Se 3 thin film with thickness of 400 nm is more suitable for solar cells. To reduce reflection loss, lattice mismatch and shunt pathways, SnO 2 high resistive layer was introduced into Sb 2 Se 3 solar cells. Due to the introduction of SnO 2 , overall performance, especially J sc , was improved and champion device was achieved with efficiency of 4.77%. Image 1 • Sb 2 Se 3 solar cells were deposited by pulsed laser deposition for the first time. • PLD-Sb 2 Se 3 thin film has a bandgap of 1.21 eV and grain size is 200–250 nm. • PLD-Sb 2 Se 3 with thickness of 400 nm is more suitable for solar cells. • The introduction of SnO 2 improves device performance, especially J sc. [ABSTRACT FROM AUTHOR]

A low electric resistive and stable ohmic back contact are crucial to the commercial application of CdTe solar cells. In this study the Sb 2 Te 3 thin film is employed as a buffer layer in the back contact of CdTe solar cells. The Sb 2 Te 3 thin films are deposited at different substrate temperature by pulsed laser deposition and then characterized to investigate the thin film properties, firstly. Hall measurements shows the Sb 2 Te 3 thin film presents strong p-type semiconductor features with high Hall mobility and carrier concentration. CdTe solar cells with Sb 2 Te 3 buffer layer in different layer thickness and deposition temperature are fabricated to obtain the optimal experiment conditions for device performance. The dark J-V curve of CdTe solar cell with Sb 2 Te 3 buffer layer exhibits a typical diode curve without roll-over phenomenon. An insertion of Sb 2 Te 3 buffer layer eliminates the Schottky barrier resulting in remarkable enhancement of open circuit voltage, short-circuit current and fill factor. Besides, the external quantum efficiency gets improvement in almost all of the absorber wavelength compared to the cells with Au-only contact. [ABSTRACT FROM AUTHOR]

AlSb is a new type of optoelectronic material with wide potential application prospects, but the applications of AlSb thin films for solar cells were few reported before, owing to the intrinsic drawbacks of deliquescence for AlSb. In this work, four types of AlSb/Sb stacks were fabricated by using pulsed laser deposition: (1) AlSb/Sb (5 nm), (2) AlSb/Sb (10 nm), (3) AlSb/Sb (15 nm) and (4) the in situ annealed AlSb film covered with Sb film which thickness is 15 nm. The experimental results indicate that the thicker the Sb layer deposited on the surface of the AlSb film is, the lower the degree of deliquescence will be. XRD measurements showed that the AlSb/Sb stacks were not deliquesced completely after exposed to air for 48 h. The EDS spectrum suggested that the percentage of oxygen atoms in the annealed AlSb film covered with Sb (15 nm) was smaller than the unannealed. The SEM morphology analysis revealed the deliquescence of AlSb film: the local film deliquesced to form sand inclusions first, after then the gradual increased of the sand inclusions lead to all deliquescence of the crystalline AlSb. [ABSTRACT FROM AUTHOR]

The study of CdS/CdTe solar cells has become popular in the photovoltaic field, in which the highest efficiency achieved is more than 20%. However, the CdTe thin film as the absorbing layer doesn’t perform very well in the long wavelength photon absorption regime. Here, a new single offset superlattice was designed to be the composite absorbing layer, which is based on a super lattice-structure of CdTe/ZnTe using cycle growth. Different cycles are to applied to the solar cells to characterize properties with respect to the super lattice. The crystallinity and transmission spectrum as well as the cross sectional morphology of the ZnTe/CdTe composite layers with different cycles are also characterized in this work. X-ray diffraction analysis showed that there is a strong (111) preferred orientation of CdTe growth. The solar cells based on the structure of FTO/CdS/CdTe/ZnTe:Cu/(ZnTe|CdTe) n /ZnTe:Cu/Au are fabricated which exhibited a desired spectral response in the range of 550–800 nm and still possess slight spectral response in the range of 850–900 nm. The photoelectric conversion efficiency of the cell of this structure is 12.8%, with a short-circuit current density of 25.59 mA/cm 2 and fill factor of 66.8%, significantly improving these properties compared with a cell without the composite layer. This structure can improve the spectral response of the solar cell when integrated with other leading technologies. [ABSTRACT FROM AUTHOR]

Aluminum antimony (AlSb) is a potential absorber for solar cells. In present work, we fabricated AlSb thin films by using pulsed laser deposition method, and investigated the influence of substrate temperature on the structural, electrical and optical properties of AlSb thin films. The results suggested that the AlSb thin films were crystal when the substrate temperature was higher than 300 °C. The average grain size of AlSb films increased and the electrical resistivity decreased with the increase of substrate temperature. At the optimized temperature of 400 °C, the optical band gap of AlSb thin film was 1.82eV. The simulated device performance of ZnS/AlSb ultra-thin solar cells showed that the power conversion efficiency was 18.01% and the quantum efficiency values were higher than 55% in the visible range. [ABSTRACT FROM AUTHOR]

CuSbSe 2 has been a potential absorber layer for thin film solar cells by reason of its attractive photovoltaic properties and environmentally friendly constituent elements. In this work, high-quality CuSbSe 2 thin film was prepared by pulsed laser deposition (PLD) and further in-situ annealing. Structural, morphological, compositional and optical properties of the unannealed and annealed films were characterized and compared separately. The results proved the existence of CuSbSe 2 , Sb 2 Se 3 and Cu 3 SbSe 3 in the unannealed film. With the rising of deposition temperature, the content of Sb 2 Se 3 increased significantly. Moreover, in-situ annealing at 350 °C can effectively reduce the Sb 2 Se 3 and Cu 3 SbSe 3 in the film. The atomic ratio of Cu:Sb:Se in the annealed film is estimated to be 25.45:26.29:48.27, basically consistent with the stoichiometry ratio of CuSbSe 2. Both annealed and unannealed CuSbSe 2 films revealed a high absorption coefficient greater than 104 cm−1. The optical band gap of the annealed film was about 1.15eV, which meets the requirements for the absorber layer of solar cells. •High-quality CuSbSe 2 thin film was successfully prepared by pulsed laser deposition •The effect of deposition temperature on CuSbSe 2 thin film prepared by pulsed laser deposition was explored •In-situ annealing was applied to reduce impurities and promote the formation of CuSbSe 2 •It would be helpful for the applications of CuSbSe 2 in solar cells in the future. [ABSTRACT FROM AUTHOR]