Search

• Calculation unit division induced soil spatial aggregation in SWAT model. • Effect of soil spatial aggregation on simulation was separated and quantified.Soil spatial aggregation caused a significant increase in annual runoff and sediment load. • The effect of soil spatial aggregation on sediment load was greater than on runoff. • Optimal sub-watershed division scheme was discussed. Distributed hydrological model divides watersheds into distinct calculation units to simulate hydrological processes. Within the model, different calculation unit division schemes induce input elements, such as soil and land use, to certain degrees of generalization, thus affecting the simulation result. Analyzing the effect of the calculation unit division on the simulation result is an important methodology to reduce uncertainty and improve the simulation accuracy of the model. Previous researchers have focused on the comprehensive effect of underlying surface generalization (such as soil, land use, and terrain generalization) caused by the calculation unit division on the simulation results, while it did not separate the effect of the generalization of the individual input factor on the simulation result. In this paper, the Dongjiang headwater region in southern China was selected as the study area. The single type of land use and slope were input into the Soil and Water Assessment Tool (SWAT) model to fix the effects of land use and terrain caused by calculation unit division on the simulation results. Eleven calculation unit division schemes were used to analyze the impact of soil spatial aggregation on runoff and sediment load simulations. The calculation unit division schemes included 11 sub-watershed division schemes and their hydrological response unit (HRU) thresholds were set at 8 %. The drainage area thresholds of the 11 sub-watershed division schemes were 30 ha, 60 ha, 120 ha, 240 ha, 480 ha, 1000 ha, 1600 ha, 2200 ha, 2800 ha, 3400 ha and 4000 ha. The results demonstrated that the soil spatial distribution showed an obvious aggregation with an increase in the drainage area threshold in the SWAT model. Of these, the Krasnozem soil type which covers the largest area in the watershed, increased significantly with an increase in the drainage area threshold. However, the areas of all the other soil types decreased significantly. The Lioth soil type covers the smallest area in the watershed decreased and even disappeared when the threshold in the SWAT model was greater than 1000 ha. Furthermore, soil spatial aggregation caused a significant increase in the annual runoff and sediment load (P < 0.05), with the sediment load (Re = 29.78 %) increasing at a greater rate compared to runoff (Re = 1.74 %). Increased soil aggregation significantly increased the sediment loads in the maximum 1-day, the continuous maximum 5-day, the continuous maximum 7-day, and the sediment load in flood processes (P < 0.001). Refining the calculation unit division scheme will cause a significant increase in the number of calculation units. Due to the computer processing power limitations, we cannot further refine the calculation unit division scheme. Based on our current operational calculation unit division scheme, we did not identify the optimal division scheme in the study region. These results can provide reference information for future research into hydrological model uncertainty and can improve the SWAT model simulation accuracy. [ABSTRACT FROM AUTHOR]

• The annual flood events contributed 64%∼99% of annual total sediment load. • The causes of flood-event sediment load variations were explored. • The high flow condition carried the same amount of sediment as previous period. • The peak sediment concentration in Tuo and Fu Rivers didn't reach the saturation. • Flood events exerted a notable impact on the operation of Three Gorges Reservoir. Understanding the change in sediment load at a flood-event scale helps to enhance channel regulation and optimize reservoir operation. This is particularly true in the Upper Yangtze River basin where a few flood events contribute most of the annual sediment load. This paper collected field data from representative hydrological stations and applied statistical analysis to investigate the change in runoff and sediment load during flood events in the Upper Yangtze River, including both the mainstream (Jinsha River) and its major tributaries (Min, Tuo, Jialing, and Wu Rivers). The results show that flood events contribute more sediment load than runoff volume to the annual statistics. A general decreasing trend occurs in sediment load in all river basins, which is closely related to soil conservation efforts and dam construction. The series of sediment load modulus of each stations present abrupt change. The variations in sediment load modulus in low flow are more significantly than those in high flow at different abrupt-change period, indicating high flows during flood event have been found to still carry the same amount of sediment as their predecessors in the Upper Yangtze River. An "abnormal" increase in sediment load in recent years (2013–2020) has been observed at the Fushun station in Tuo River, and three factors, i.e., earthquake, high-intensity rainstorm and local scouring, were identified to be responsible for such increase. The findings of our study are helpful for better management of basin-scale sediment resources and regulation of reservoirs in the Upper Yangtze River. [ABSTRACT FROM AUTHOR]

Summary: Annual runoff and annual suspended sediment loads of hydrological gauging stations along the mainstream of the Yangtze River basin (Pingshan station, Yichang station, Hankou station and Datong station) and main tributaries (Beipei station in Jialingjiang River, Wulong station in Wujiang River and Huangzhuang station in Hanjiang River) were analyzed with the help of Mann–Kendall trend analysis and linear regression analysis. Research results indicate that (1) changing patterns of runoff and sediment loads are different in different parts of the Yangtze River basin. No significant trend is detected for annual runoff at all stations at >95% confidence level. Changes of sediment loads, however, demonstrate different pictures in the Yangtze River basin. The sediment loads are in increasing trend in Pingshan station- the most upstream station on the Yangtze River basin (this increasing trend is significant at >95% confidence level after about 1990), but are in decreasing trend at other stations (including stations in the tributaries studied in this paper). This decreasing trend becomes more obvious from Yichang station to Datong station. (2) Water reservoirs exerted more influences on changes of sediment loads than on runoff, which is the main reason for the decreasing trend of sediment loads found in most stations. (3) Influences of water reservoirs on sediment loads are more obvious in the tributaries than in the mainstream of the Yangtze River basin, while in the mainstream the variation patterns of sediment loads are determined by multiple factors. [Copyright &y& Elsevier]