Search

Mechanical stratigraphy encompasses the mechanical properties, thicknesses, and interface properties of rock units. Although mechanical stratigraphy often relates directly to lithostratigraphy, lithologic description alone does not adequately describe mechanical behavior. Analyses of normal faults with displacements of millimeters to 10's of kilometers in mechanically layered rocks reveal that mechanical stratigraphy influences nucleation, failure mode, fault geometry, displacement gradient, displacement distribution, fault core and damage zone characteristics, and fault zone deformation processes. The relationship between normal faulting and mechanical stratigraphy can be used either to predict structural style using knowledge of mechanical stratigraphy, or conversely to interpret mechanical stratigraphy based on characterization of the structural style. This review paper explores a range of mechanical stratigraphic controls on normal faulting illustrated by natural and modeled examples. [ABSTRACT FROM AUTHOR]

Abstract: The in situ stress state is an important controlling factor for the slip behavior of faults and fractures in the earth''s crust and hence for the productivity of faulted and fractured hydrocarbon reservoirs. Current methods for stress tensor estimation rely on slip vector field data; however, this information is not generally available from data sets that are commonly used in the oil and gas industry. This work presents a new stress inversion approach where slip tendency is used as a proxy for fault displacement, which can easily be extracted from data sets routinely used by the oil and gas industry. The inversion approach is demonstrated using a data set obtained from the Canyon Lake Gorge in Comal County, Texas. [Copyright &y& Elsevier]

Abstract: In normal faulting regimes, the magnitudes and orientations of the maximum and minimum principal compressive stresses may be known with some confidence. However, the magnitude of the intermediate principal compressive stress is generally much more difficult to constrain and is often not considered to be an important factor. In this paper, we show that the slip characteristics of faults and fractures with complex or nonoptimal geometry are highly sensitive to variation or uncertainty in the ambient effective intermediate principal stress (σ′2). Optimally oriented faults and fractures may be less sensitive to such variations or uncertainties. Slip tendency (T s) analysis provides a basis for quantifying the effects of uncertainty in the magnitudes and orientations of all principal stresses and in any stress regime, thereby focusing efforts on the most important components of the system. We also show, for a normal faulting stress regime, that the proportion of potential surfaces experiencing high slip tendency (e.g., T s ≥0.6) decreases from a maximum of about 38% where σ′2 = σ′3, to a minimum of approximately 14% where σ′2 is halfway between σ′3 and σ′1, and increases to another high of approximately 29% where σ′2 = σ′1. This analysis illustrates the influence of the magnitude of σ′2 on rock mass strength, an observation previously documented by experimental rock deformation studies. Because of the link between fault and fracture slip characteristics and transmissivity in critically stressed rock, this analysis can provide new insights into stress-controlled fault transmissivity. [Copyright &y& Elsevier]

Yucca Mountain, Nevada, is the sole candidate site for underground disposal of high-level radioactive waste in the United States. The mountain is composed of Tertiary (12.8–11.6 Ma) volcanic tuff, cut by west-dipping normal faults that divide the mountain into north-trending, east-dipping cuestas. Geologic characterization of Yucca Mountain by the U.S. Department of Energy (DOE) has focused on mapping lithostratigraphic units, faults (including single plane, small-displacement surfaces of discontinuity, and large-displacement fault zones), and fractures (quasi-planar zones that have experienced loss of cohesion, including joints, partially mineralized joints, veins, and small-displacement faults). Faults and fractures are important to repository design because they affect seismic hazard, rockfall, and fluid transmissivity in the surrounding rock mass. Geologic maps and detailed studies of rock pavements and tunnel walls reveal that faults and fractures within Yucca Mountain are not uniform in orientation or intensity. We investigate two aspects of distributed deformation arising from fault displacement patterns at Yucca Mountain. First, fault-parallel strains (elongation parallel to cutoff lines where stratigraphic horizons intersect fault planes) develop as a result of lateral fault displacement gradients. Using existing data, we analyze the likely state of strain in fault blocks at Yucca Mountain. Second, fault-strike-perpendicular strains can develop where two normal faults propagate past each other. A component of the total strain is distributed into the surrounding rock to produce synthetic layer dip or a network of smaller faults and fractures. We find that small-scale faulting and fracturing at Yucca Mountain is variable and is strongly controlled by larger scale fault system architecture. [Copyright &y& Elsevier]