Search

Optical, electrical, and mass spectrometry experiments were carried out on solution grown GaN crystals to detect and identify the impurities incorporated in faces of different polarity at different growth condition. Selective etching, photoluminescence and cathodoluminescence imaging indicate that Mg acceptors incorporate preferentially in GaN nitrogen polar face. Larger incorporation of Mg was observed on crystals grown at lower temperatures. Capacitance–voltage measurements verified p-type conductivity due to an excess of Mg acceptors on N-polar face of the GaN crystals. These results suggest that epitaxial layers deposited from liquid phase may be the best approach to produce p-type conducting layers with high hole concentration and low defect density. [ABSTRACT FROM AUTHOR]

Studies of diamond material for thermal management are reported for a nominally 1-µm thick layer grown on silicon. Thickness of the diamond is measured using spectroscopic ellipsometry. Spectra are consistently modeled using a diamond layer taking into account surface roughness and requiring an interlayer of nominally silicon carbide. The presence of the interlayer is confirmed by transmission electron microscopy. Thermal conductivity is determined based on a heater which is microfabricated followed by back etching to produce a supported diamond membrane. Micro-Raman mapping of the diamond phonon is used to estimate temperature rise under known drive conditions of the resistive heater. Consistent values are obtained for thermal conductivity based on straightforward analytical calculation using phonon shift to estimate temperature and finite element simulations which take both temperature rise and thermal stress into account. [ABSTRACT FROM AUTHOR]

The in-plane thermal conductivity of polycrystalline diamond near its nucleation site, which is a key parameter to an efficient integration of diamond in modern high power AlGaN/GaN high electron mobility devices, has been studied. By controlling the lateral grain size evolution through the diamond growth conditions it has been possible to increase the in-plane thermal conductivity of the polycrystalline diamond film for a given thickness. Besides, the in-plane thermal conductivity has been found strongly inhomogeneous across the diamond films, being also possible to control this inhomogeneity by the growth conditions. The experimental results has been explained through a combined effect of the phonon mean free path confinement due the grain size and the quality of the grain/grain interfaces, showing that both effects evolve with the grain expansion and are dependant on the diamond growth conditions. This analysis shows how the thermal transport in the near nucleation region of polycrystalline diamond can be controlled, which ultimately opens the door to create ultra-thin layers with a engineered thermal conductivity, ranging from a few W/m K to a few hundreds of W/m K. [ABSTRACT FROM AUTHOR]