Search

Powell–Sabin B-splines, which are based on triangles, are employed in the framework of the extended finite element method (XFEM) for fracture analysis. This avoids the necessity of remeshing in discrete fracture models and increases the solution accuracy around the crack tip. Powell–Sabin B-splines are C 1 -continuous throughout the whole domain. The stresses around crack tips are captured more accurately than when using elements with a standard Lagrangian interpolation. Although Powell–Sabin B-splines do not hold the Kronecker-delta property, the Heaviside function and the tip enrichment function are confined to the cracked elements only, similar to the traditional XFEM but different from the extended isogeometric method. In addition, Powell–Sabin B-splines still hold C 1 -continuous throughout cracked elements. There is no need to lower the continuity at element boundaries, to confine basis function support in cracked elements. Shifting is used to ensure compatibility with the surrounding discretization. The sub-triangle technique is employed for the numerical integration over crack elements. The versatility and accuracy of the approach to simulate crack problems are assessed in case studies, featuring mode-I and mixed-mode crack problems. • Extended Powell–Sabin finite element method is developed for fracture analysis. • The extended scheme confines the effect of the crack in cracked elements only. • Shifting is proposed and elaborated to enforce compatibility for higher-order bases. • Numerical integration scheme is proposed for the integration in the cracked elements. [ABSTRACT FROM AUTHOR]

This paper presents a highly efficient small-scale, detailed finite-element modelling method for flexible risers which can be effectively implemented in a fully-nested (FE 2 ) multiscale analysis based on computational homogenisation. By exploiting cyclic symmetry and applying periodic boundary conditions, only a small fraction of a flexible pipe is used for a detailed nonlinear finite-element analysis at the small scale. In this model, using three-dimensional elements, all layer components are individually modelled and a surface-to-surface frictional contact model is used to simulate their interaction. The approach is applied on a 5-layered pipe made of inner, outer and intermediate polymer layers and two intermediate armour layers, each made of 40 steel tendons. The capability of the method in capturing the detailed nonlinear effects and the great advantage in terms of significant CPU time saving are demonstrated by comparing the results obtained on elements of pipe of different lengths, equal to one pitch length L p as well as L p / 5 , L p / 20 and L p / 40 . [ABSTRACT FROM AUTHOR]

Abstract: An updated Lagrangian finite element formulation of a three-dimensional annular section beam element is presented for large displacement and large rotation dynamic analyses of flexible riser structures. In this formulation a new linearization method is used to avoid inaccuracies normally associated with other linearization schemes. The effects of buoyancy force as well as steady state current loading are considered in the finite element solution for riser structures response. The formulation has been implemented in a nonlinear finite element code and the results are compared with those obtained from other schemes reported in the literature. [Copyright &y& Elsevier]

Abstract: This article proposes a predictive method for identifying the range of sea-states considered safe for the installation of offshore structures. A finite element dynamic analysis of the system for various sea-states characterized by significant wave heights and mean zero-up-crossing wave periods and modeled as a combination of several wave components has been performed. Using this procedure a table of safe and unsafe sea-states is generated. The significant wave height (H s ) and mean zero-up-crossing wave period (T z ) of a future sea-state in a location in the north east Pacific were predicted from the distributions whose parameters were estimated using the artificial neural networks (ANNs) trained for this purpose. The location of US National Oceanographic Data Center (NODC) Buoy 46005 is used in this study. The H s and T z of some future sea-states were predicted from their corresponding conditional 7-parameter distribution given some information including a number of previously measured H s ’s and T z ’s. This gives a predicted sea-state for a specific time in future. The parameters of the distributions have been estimated from the outputs of two different 7-network sets of trained ANNs. A pile-driving operation is used as a case study in which the pile configuration, including the non-linear foundation and the gap between the pile and the pile sleeve shims, has been modeled by the finite elements method and the range of sea-states suitable for safe pile-driving operation was identified. [Copyright &y& Elsevier]

This paper investigates the effect of cut-outs on the dynamic behaviour of cylindrical panels, using a newly developed strain based finite element. The developed element is based on assumed strains and has only five necessary degrees of freedom at each corner node. The displacement fields of the element satisfy the exact requirement of rigid body displacements. The efficiency of the element is tested by applying it to the calculation of natural frequencies of shells. Investigations are first carried out to test the convergence of the element and to establish the mesh size to be used. The element is further applied to analyse cylindrical panels with cut-outs. Simply supported as well as clamped panels on their edges were considered and the effects of the size and location of the openings on the natural frequencies are investigated. The subspace iteration technique which is shown to have an economising effect, is used to obtain the natural frequencies and the associated modes of vibration. [Copyright &y& Elsevier]

This paper presents a formulation in the form of an inverse eigen value problem for modification of vibration behavior of structures. The proposed method which is based on the second order approximation in Taylor expansion is expressed in terms of variables relating to stiffness or mass matrix parameters in a finite element formulation. An initial sensitivity analysis identifies the regions within the structure where the modifications would yield the required changes in the structures dynamic characteristics. An algorithm is developed which allows efficient modification of structural dynamics characteristics without iterations. These modifications are conducted locally so that only elemental stiffness and matrices are affected. The algorithm is applied to four case studies and it is found that large modification of natural frequencies of up to 10% can be realized with an induced error of less than 5% for truss structures, and less than 3% for plane problems. [Copyright &y& Elsevier]

This paper presents a cylindrical strain based shallow shell finite element which is developed for linear and geometrically non-linear analysis of cylindrical shells. The developed element is rectangular inplan and has the only five essential degrees of freedom at each corner node. The displacement fields of the element satisfy the exact requirement of rigid body modes. The efficiency of the element is demonstrated by applying it to the linear and geometrically nonlinear analysis of shell structures. The suitability of the element is also tested for natural frequencies’ calculations of cylindrical shells. Results obtained by the present element are compared with those available in the literature. These comparisons show that efficient convergence characteristics and accurate results can be obtained by using the present element. [Copyright &y& Elsevier]

This paper presents formulations for inverse optimisation of vibration behaviour of finite element models of both truss and continuous structures. The proposed algorithms determine the required modifications on truss and continuous structures to achieve specified natural frequencies. The modification can be carried out globally or locally on the structures stiffness and matrices and the formulation can also be used to add new structural members to achieve the desired response. Numerical examples and finite element implementation of the developed method are provided to demonstrate the feasibility of the formulations. [Copyright &y& Elsevier]

This paper presents an inverse formulation of eigenvalue problem for optimising the dynamics behaviour of structures. The formulation is applied to one- and two-dimensional finite elements which are commonly used in simulation of real structures. Based on this formulation an algorithm is developed for accurate and efficient modification of structures stiffness and mass characteristics to achieve the desired natural frequencies and interpretation of results in terms of physical design parameters. The proposed algorithm is tested by conducting four case studies and the results are validated against exact solutions. [Copyright &y& Elsevier]

Experimental tests and detailed finite element analyses were carried out on a model of flexible riser to evaluate the capability of the finite element method to predict its nonlinear structural response. The riser consists of four layers, which include two cylindrical polycarbonate tubes and two steel helical layers. One helical layer represents the carcass layer in a flexible riser whilst the other represents the riser tendon armour layer. First, bending load experiments on the model are described which provide some insight regarding the fundamental behavior of flexible pipe structures. This is followed by the description of the FE models in which all layer components are individually modelled and a surface-to-surface frictional contact model is used to simulate their interaction. Finally, the FE numerical results were compared with the test data to outline the capacity of the numerical method to predict the response of flexible riser structures. [ABSTRACT FROM AUTHOR]

Abstract: The purpose of this paper is to model the detailed effects of interactions that take place between components of un-bonded flexible risers, and to study the three-dimensional motion responses of risers when subjected to axial loads, bending moments, and internal and external pressures. A constitutive law for un-bonded flexible risers is proposed and a procedure for the identification of the related input parameters is developed using a multi-scale approach. A generalized finite element structural model based on the Euler–Bernoulli beam theory is developed in which the constitutive law is embedded. The beam theory is enhanced by the addition of suitable pressure terms to the generalized stresses to account for the internal and external pressures, and it can therefore be efficiently used for large-scale analyses. The developed nonlinear relationship between generalized stresses and strains in the beam is based on the analogy between frictional slipping between different layers of a flexible riser and frictional slipping between micro-planes of a continuum medium in non-associative elasto-plasticity. The merit of the present constitutive law lies in its ability to capture many important aspects of the structural response of risers, including the energy dissipation due to frictional slip between layers and the hysteresis response. [Copyright &y& Elsevier]

Abstract: This paper proposes a new method for performing predefined simultaneous modification of natural frequencies and buckling loads of composite cylindrical panels. The method is based on the fact that both natural frequencies and buckling loads are eigenvalues of an algebraic system of simultaneous equations. First- and second-order derivatives of these eigenvalues are calculated and the first two terms in Taylor expansion are used for developing a modification procedure that is defined as an inverse eigenvalue problem. A four-layered composite cylindrical panel with an arbitrary angle-ply stacking sequence is considered as a case study and several simultaneous modifications for natural frequencies and buckling loads are carried out. It is shown that the proposed method can perform the predefined modification with an acceptable accuracy even for large perturbations in objective functions. [Copyright &y& Elsevier]

Abstract: In this paper a new constitutive model for flexible risers is proposed and a procedure for the identification of the related input parameters is developed using a multi-scale approach. The constitutive model is formulated in the framework of an Euler–Bernoulli beam model, with the addition of suitable pressure terms to the generalized stresses to account for the internal and external pressures, and therefore can be efficiently used for large-scale analyses. The developed non-linear relationship between generalized stresses and strains in the beam is based on the analogy between frictional slipping between different layers of a flexible riser and frictional slipping between micro-planes of a continuum medium in non-associative elasto-plasticity. Hence, a linear elastic relationship is used for the initial response in which no-slip occurs; an onset-slip function is introduced to define the ‘no-slip’ domain, i.e. the set of generalized stresses for which no slip occurs; a non-associative rule with linear kinematic hardening is used to model the full-slip phase. The results of several numerical simulations for a riser of small-length, obtained with a very detailed (small-scale) non-linear finite-element model, are used to identify the parameters of the constitutive law, bridging in this way the small scale of the detailed finite-element simulations with the large scale of the beam model. The effectiveness of the proposed method is validated by the satisfactory agreement between the results of various detailed finite-element simulations for a short riser, subject to internal and external uniform pressure and uniform cyclic bending loading, with those given by the proposed constitutive law. [Copyright &y& Elsevier]

Abstract: In this paper, the first and second order derivatives of natural frequencies and buckling loads with respect to an arbitrary geometrical or physical property of a plate structure are calculated. Based on these eigenderivatives, and by using first and second order Taylor expansions, an approximate method is presented for simultaneous modification of natural frequencies and buckling loads. In the proposed method, the structural modification is considered as an inverse eigenvalue problem and calculated eigenderivatives are used for transforming this inverse problem to solving a system of algebraic equations. By solving this set of equations, the necessary changes in design parameters are calculated, in order to achieve predefined simultaneous shifts in natural frequencies and buckling loads. A plate with two boundary conditions is considered as a case study. The plate is divided into eight regions and the plate thickness in each region is considered as a design parameter. By considering several case studies, the required modification in design variables is calculated for achieving a predefined change in natural frequencies, buckling loads or simultaneous change of both. In each case, the calculated changes in design variables are implemented on the initial structure, and the changes in eigenvalues are computed using FE method. It is shown that the results from presented method compare very well with those obtained from a direct optimization procedure. [Copyright &y& Elsevier]

• Fretting fatigue behavior of 316L SS was examined under combined loading. • Combined load condition was induced using a designed fixture. • Increasing the bending contribution improves fretting fatigue life. • Increasing the grain size decreases the fretting fatigue life. • Increasing the bending contribution reduces singularity at the contact edges. • Fretting fatigue life is more sensitive to bending contribution than grain size. Fretting fatigue occurs in engineering applications where two interacting surfaces are subjected to fluctuating forces. The fluctuating forces occasionally act as a combined loading condition. The present paper investigates fretting fatigue behaviour of 316L stainless steel under such combined (i.e. tensile and bending) loading conditions. A new fixture was developed in order to apply bending and tensile loads simultaneously. Using this fixture, the effect of different bending-to-tension ratios was investigated. The results showed that increasing the contribution of bending load improves fretting fatigue life. On the other hand, increasing grain size decreases fretting fatigue life. Furthermore, sensitivity analysis based on Taguchi method revealed that fretting fatigue life is more sensitive to the increment of bending force contribution. The cyclic behavior of the specimens was assessed and finite element simulation was utilized to study the main contact parameters, including contact pressure, shear stress, and relative slip. Whilst confirming the experimental results, the simulation further showed that increasing the contribution of bending force reduces the concentration behavior at the contact edges. [ABSTRACT FROM AUTHOR]

Abstract: Twin screw melt conditioners are used for mixing purposes and are mainly used for polymer processing. These conditioners (extruders) can be used for liquid metal processing in which liquid metal/slurry is subjected to high shear stress. This process results in grain refinement of structure. In this article, in a co-rotating twin screw melt conditioner, the solidification process of a liquid along with temperature variations of the melt with regard to the complexity of the flow has been examined. With the aid of dynamic mesh scheme, a Computational Fluid Dynamic (CFD) simulation was performed. The achieved results were in good agreement with values based on the experimental measurements. It was concluded that shearing and pouring temperatures play important roles in solidification progression and the main reason of surviving nuclei is heat dissipation from the barrel. Also, the main factor affecting the grain size is the temperature differences between the pouring and the setting temperature. It was observed that, the twin screw melt conditioner can decrease the temperature gradient and with the help of turbulence, providing appropriate conditions for formation of fine and equiaxed grains. [Copyright &y& Elsevier]