Search

To evaluate the usefulness of 3-dimensional (3D) printed models as an aid for the treatment of complex CVJ anomalies. 3D printed models were fabricated for 21 patients with complex CVJ anomalies, including vertebral artery anomaly, thin C2 pedicle, vertical atlantoaxial facet joint, or rotational dislocation combined with atlantoaxial dislocation and basilar invagination. Preoperative planning, surgical simulation, and intraoperative reference were achieved using the 3D model during the surgical treatment. The usefulness of 3D printed models, and postoperative clinical and radiological outcomes were assessed. Direct posterior reduction and atlantoaxial fixation were achieved in 19 patients. Transoral odontoidectomy followed by posterior fixation was implemented for 2 patients with vertical facet joint and rotational dislocation. All screws were safely inserted with no complication, and 90% patients achieved a >60% reduction of both horizontal and vertical dislocation. Clinical symptoms improved in all patients, with the averaged Japanese Orthopedic Association scores increasing from 11.14 to 14.43 (P < 0.01). The patient-specific 3D printed model would be an effective tool for evaluation of the reducibility of the atlantoaxial dislocation and basilar invagination, decision making in choosing the optimal surgical approach and way of fixation, and precise placement of the screw while protecting the vertebral artery and spinal cord. The risk of neurovascular injury was minimized, and encouraging outcomes were achieved with the aid of this technique. [ABSTRACT FROM AUTHOR]

Objective To identify clinical factors predicting the development of myelopathy in cervical ossification of the posterior longitudinal ligament (OPLL) patients with radiculopathy. Methods We retrospectively reviewed 83 cervical OPLL patients who presented with radiculopathy. On the basis of the symptoms and physical findings, we divided patients into 2 groups: myelopathy group and nonmyelopathy group. Demographic, clinical, and radiologic characteristics were reviewed and analyzed among the 2 groups. Predictors for the development of myelopathy were assessed via univariate and multivariate analysis. Results Univariate analysis demonstrated that a high occupying ratio and the presence of an intramedullary high signal were risk factors for development of myelopathy from radiculopathy in OPLL patients. Multivariate analysis further identified that a high occupying ratio was the only independent predictor (odds ratio 1.05, 95% confidence interval 1.003–1.091, P = 0.035). The cervical range of motion and minor trauma were not related to the development of myelopathy in our study. Conclusions Nonmyelopathic OPLL patients with radiculopathy and a high occupying ratio were at higher risk of developing myelopathy, and surgical intervention should be recommended in these cases. However, for elderly patients with significant comorbid conditions, the risks and benefits of surgery should be carefully considered. [ABSTRACT FROM AUTHOR]

Background: Vascular complications following anterior cervical spine surgery are rare but potentially devastating. Complications associated with the carotid artery are even more disastrous but largely anecdotal, with no more than 4 reported cases.Materials and Methods: We report 3 new cases of carotid artery-related perioperative stroke following anterior cervical spine surgery. All 3 patients had carotid artery atherosclerosis and the time of intraoperative carotid artery retraction was longer than 1 hour. One patient underwent hypotension during surgery. Risk factors as well as prevention and management protocols of carotid artery-related perioperative stroke based on the literature review and our clinical experience are discussed.Conclusions: Carotid artery-related perioperative stroke following anterior cervical spine surgery is extremely rare. Prolonged traction, carotid artery atherosclerosis, and intraoperative hypotension can produce cerebral hypoperfusion and cause ischemic stroke. Preoperative risk assessment, adequate perioperative manipulation, and postoperative management can minimize overall morbidity and mortality. [ABSTRACT FROM AUTHOR]

Objective To investigate risk factors and outcomes and to develop a cogent perioperative management algorithm for dural defects (DDs) in anterior surgery for cervical ossification of the posterior longitudinal ligament (OPLL). Methods Ninety OPLL patients who had undergone anterior cervical decompression between January 2014 and December 2016 were reviewed. DDs occurred in 12 patients. Demographic, clinical, and radiologic data; intraoperative and postoperative management; and complications were analyzed. Risk factors for DDs were assessed with multivariate analysis. A treatment algorithm was identified based on these findings and our experience. Results The prevalence of DDs was 13.3% (12/90). Univariate and multivariate analyses showed that the ratio of OPLL base to spinal canal (odds ratio [OR] 1.09, P = 0.012), kyphotic cervical alignment with thick OPLL masses (OR 9.44, P = 0.026), and lateral, curved, and irregular OPLL masses (OR 8.28, P = 0.037) could be risk factors for DDs. DDs were repaired intraoperatively with onlay grafts, and lumbar drains were placed in all DD patients. The treatment was successful in all DD patients, and outcome measures did not differ between the DD and no DD groups. No patient had experienced complications associated with DDs and CSF leaks at the final follow-up visit. Conclusions Patients with broad-based OPLL, kyphotic cervical alignment with thick OPLL masses, and lateral, curved, and irregular OPLL masses have a higher risk of DD in anterior surgery for OPLL. Intraoperative primary repair with onlay grafts combined with early lumbar drains is a simple, safe, and effective strategy for DDs. The outlook for the long-term sequelae of DDs is optimistic if they are managed adequately. [ABSTRACT FROM AUTHOR]

To investigate the biomechanical effect of C1 lateral mass-C2 pedicle screw-rod (C1LM-C2PS) fixation with and without transverse connectors (TC) in an atlantoaxial instability (AAI) model. Ten freshly frozen cadaveric specimens were tested using an industrial robot under the following conditions: intact model, AAI model, C1-C2 model, C1-C2 with one TC model, and C1-C2 with two TCs model. Three types of motion, flexion-extension (FE), lateral bending (LB), and axial rotation (AR), were applied (1.5 Nm) to the specimens. The range of motion (ROM) and neutral zone (NZ) between C1 and C2 in all directions were measured. Compared with those of the intact and AAI models, the C1-C2 ROM and NZ of all instrumented groups were decreased significantly in each direction of loading motion (P < 0.05). The mean FE ROM in the no TC, 1 TC, and 2 TC groups was 2.12° ± 0.41°, 2.29° ± 0.42°, and 2.04° ± 0.69°, respectively (P = 0.840, 0.981, 0.628, respectively); the mean LB ROM in the 3 intervention groups was 1.26° ± 0.67°, 1.02° ± 0.51° and 1.03° ± 0.57°, respectively (P = 0.489, 0.501, 1.000, respectively). During AR, the ROM and NZ of the no TC group (3.19° ± 0.89° and 1.51° ± 0.42°) were significantly reduced by more than 60% compared with those in the 1 (0.98° ± 0.28° and 0.40° ± 0.11°) and 2 TC groups (1.17° ± 1.69° and 0.42° ± 0.61°) (P < 0.001). Two TCs were equivalent for all loading motions to 1 TC (P > 0.05). Adding TCs to C1LM-C2PS can effectively decrease the axial rotation ROM and enhance the stability of C1-C2 segment. Therefore, it is necessary to use TC-strengthened C1 lateral mass -C2 pedicle screw-rod fixation in patients with instability of C1-C2. [ABSTRACT FROM AUTHOR]