• Adsorption kinetic and regeneration of polyacrylic and polystyrene resins are compared. • Low salt dosage cannot regenerate PFAS; high dosage causes salting out effect. • H 2 O 2 is effective in mitigating ClO 3 − and ClO 4 −, enhancing PFOA destruction/defluorination. • Methanol improved regeneration recovery but hindered PFAS electrochemical oxidation. • 1 % Na 2 SO 4 is a favorable brine/electrolyte for the integrated IX/EC process. This study proposes an integrated approach that combines ion-exchange (IX) and electrochemical technologies to tackle problems associated with PFAS contamination. Our investigation centers on evaluating the recovery and efficiency of IX/electrochemical systems in the presence of five different salts, spanning dosages from 0.1 % to 8 %. The outcomes reveal a slight superiority for NaCl within the regeneration system, with sulfate and bicarbonate also showing comparable efficacy. Notably, the introduction of chloride ion (Cl−) into the electrochemical system results in substantial generation of undesirable chlorate (ClO 3 −) and perchlorate (ClO 4 −) by-products, accounting for ∼18 % and ∼81 % of the consumed Cl−, respectively. Several agents, including H 2 O 2 , KI, and Na 2 S 2 O 3 , exhibited effective mitigation of ClO 3 − and ClO 4 − formation. However, only H 2 O 2 demonstrated a favorable influence on the degradation and defluorination of PFOA. The addition of 0.8 M H 2 O 2 resulted in the near-complete removal of ClO 3 − and ClO 4 −, accompanied by 1.3 and 2.2-fold enhancements in the degradation and defluorination of PFOA, respectively. Furthermore, a comparative analysis of different salts in the electrochemical system reveals that Cl− and OH− ions exhibit slower performance, possibly due to competitive interactions with PFOA on the anode's reactive sites. In contrast, sulfate and bicarbonate salts consistently demonstrate robust decomposition efficiencies. Despite the notable enhancement in IX regeneration efficacy facilitated by the presence of methanol, particularly for PFAS-specific resins, this enhancement comes at the cost of reduced electrochemical decomposition of all PFAS. The average decay rate ratio of all PFAS in the presence of 50 % methanol, compared to its absence, falls within the range of 0.11–0.39. In conclusion, the use of 1 % Na 2 SO 4 salt stands out as a favorable option for the integrated IX/electrochemical process. This choice not only eliminates the need to introduce an additional chemical (e.g., H 2 O 2) into the wastewater stream, but also ensures both satisfactory regeneration recovery and efficiency in the decomposition process through electrochemical treatment. [Display omitted] [ABSTRACT FROM AUTHOR]