Search

Wake measurements are critical for quantifying the hydrodynamic effects of tidal energy extraction and for designing arrays of tidal turbines. In this investigation field measurements from the wake of PLAT-I, a commercial-scale floating array of four tidal turbines, are presented. Instrumented surface-following drifters are used to measure velocity and turbulence in the wake of PLAT-I while deployed in Grand Passage, an energetic tidal channel in the Bay of Fundy, NS, Canada. Field measurements were obtained when the turbines where fully operational under optimal conditions during spring tides. The collected data are used to construct tridimensional maps of acoustic backscatter, mean velocity, vertical velocity variance and turbulent kinetic energy dissipation rate downstream of the platform at different stages of the tide. The operational turbine array wake was captured for ebb and flood tides. For both ebb and flood, reduced velocities are observed in the upper water column at the depths spanned by the turbine rotors. Vertical profiles of velocity mix quickly during flood tide but velocities remain slower than the undisturbed flow outside of the wake up to 20 effective diameters downstream of the platform. In contrast, during ebb, the velocity deficit persists farther downstream, and the reduced velocity increases slightly. Elevated turbulence levels peak at 2 effective diameters downstream of the turbines and recover to undisturbed flow levels at approximately 10 effective diameters downstream of the platform for both ebb and flood tides. Total energy dissipated through turbulence within the wake is estimated to be less than 10% of the energy extracted for electricity production. • Field measurements of the wake from an operational commercial scale floating tidal turbine array. • The wake is confined to the upper water column during both ebb and flood tides. • Wake velocity deficit recovers faster during flood tide than during ebb tide • Wake recovery occurs beyond 20 effective diameters downstream of the turbines. • Wake elevated turbulence intensities recover quickly for both ebb and flood tides [ABSTRACT FROM AUTHOR]

In this investigation, instrumented mobile platforms are used to spatially map the turbulent flows in Grand Passage, one of the Bay of Fundy's more energetic tidal channels in Nova Scotia, Canada. The aim is to characterize the flow around the PLAT-I floating tidal energy platform developed by Sustainable Marine Energy Canada (SMEC). GPS-tracked surface drifters equipped with fast-sampling acoustic Doppler current profilers (ADCPs) provide turbulence-resolving vertical profiles of velocity and turbulent kinetic energy dissipation rate along drifter trajectories, while vessel-mounted ADCP transects complement the mean flow velocity measurements. These data are used to construct tridimensional quasi-synoptic maps of mean velocities and turbulence parameters for several stages of the tide around PLAT-I's location including peak ebb and flood currents. The data set includes measurements under natural flow conditions, and while the turbines installed on PLAT-I were both not operational and operational. The measurement techniques and resulting maps successfully capture the spatial and temporal structure of the flow for unsteady conditions for various tidal conditions. The combined wake of the four 6.3 m operational PLAT-I turbines was measured for a single tidal stage. Closer to the turbines, the vertical extent of the wake is about 6 m (approximately one turbine diameter), increasing with distance downstream, while the maximum observed velocity deficit is 26% relative to not operating conditions, decreasing with distance downstream. [ABSTRACT FROM AUTHOR]

This study characterizes the turbulence in a 3.6 m s −1 tidal channel in the Bay of Fundy, Nova Scotia that has been identified for development as a tidal power resource. A horizontally aimed fast-sampling single beam acoustic Doppler profiler was deployed on a subsurface buoy, and the flow-aligned profile is used to test the cross-spectral (Garbini 1982a,b) and the spatial structure function methods for estimating dissipation rates of turbulent kinetic energy. Second and third order structure functions computed over separation distances in the mean flow direction vary with spatial scale as predicted by the Kolmogorov hypotheses. Cross-spectra from adjacent spatial bins have a noise floor an order of magnitude lower than the corresponding auto-spectra and phase lags over increasing spatial ranges demonstrate the advection of coherent structures by the mean flow. The spectral and structure function estimates of dissipation rate vary linearly with U 3 and agree to within a factor of 2.5 on ebb and 6 on flood, the spectral estimates being larger. Dissipation rates are an order of magnitude higher on ebb than flood tide, likely due to asymmetry in the local topography. [ABSTRACT FROM AUTHOR]

Natural tracer pebbles and cobbles were deployed on a steep (slope: 0.1) mixed sand and gravel mega-tidal beach located at the head of the Bay of Fundy. Two experiments were carried out to investigate the response of natural pebble- and cobble-sized material, both to energetic wave conditions during individual storm events, and to tidal-only forcing conditions between storms. Net displacement of different tracer sizes was the focus of the first experiment, while the effect of different shapes was tested in the second. The pebbles and cobbles were painted in fluorescent colors, labeled, and their positions measured at low tide over periods of 10–12 days. The tracers were emplaced at mid-tide level on the beach face at low water, and later recovered and re-deployed on successive low tides. Net travel distance and direction were measured upon recovery. Hydrodynamic forcing conditions and local morphology at mid-tide level on the beach face were monitored continuously during the experiments. In the first experiment, recovery rates were 100% during calm and moderate wave conditions ( H s ≤ 0.5 m), but decreased significantly in more energetic wave forcing ( H s up to 1 m). Recovery rates were lower for smaller tracers. During a three day wind-wave event, net displacements of up to 48 m were measured. Comparable net displacements were observed for all tracers. Maximum displacements were 39 m onshore, 42 m offshore, and 46 m alongshore. In calm conditions, maximum displacements were less than 1 m, indicating that the bottom stresses due to tidal currents alone are too low to cause significant tracer displacement on time scales of weeks, despite the high tidal range. In the second experiment, recovery rates were lower, due to more energetic wave forcing: significant wave heights reached H s >0.5 m on 80% of the particle tracking days and H s >1 m on 30% of the days. Flat pebbles and cobbles reached the longest transport distances, with a maximum net displacement of 98 m. The flat tracers were observed to be flipped by the shore break and to “ride” the swash bore, and were in this manner transported long distances, shoreward up to 66 m. In both experiments, the directions of alongshore displacements were consistent with deviations of the angle of wave incidence from the shorenormal. Tracer burial and re-exposure was observed – via rotary imaging sonar – with the evolution and migration of m-wavelength ripples. The study allowed a direct correlation of pebble and cobble tracer displacements to hydrodynamic forcing during individual storm events, with consideration of tracer particle size, and shape. [ABSTRACT FROM AUTHOR]

Abstract: The vertical structure of flow and stress within turbulent oscillatory boundary layers above evolving sand ripples is investigated in experiments carried out using a prototype wide-band coherent Doppler profiler in an oscillating boundary facility with beds of 0.216mm median diameter sand, 10s oscillation period, and 0.9m excursion (Shields parameter=0.11). The bed evolved from an initial nominally flat state through 5cm wavelength, nearly two-dimensional ripples to 12cm wavelength, three-dimensional ripples. Average ripple height increased from 0.2cm to 1.4cm, corresponding to roughness Reynolds numbers between 68 and 7700. Average ripple steepness increased from 0.03 to 0.15. Bed elevation spectra exhibit the shift towards lower spatial frequencies observed by and, at higher spatial frequencies, a saturation range analogous to that in surface gravity wave spectra. Horizontal velocity profiles exhibit the phase lead and overshoot expected for oscillatory boundary layer flow. Bottom stress estimates are obtained from the acceleration defect, the Reynolds stress and the law-of-the-wall. The defect stress estimates are bounded above and below by the Reynolds stress and the law-of-the-wall estimates, respectively. The values of the bottom friction coefficient and hydraulic roughness from the defect stress estimates are consistent with results from previous work on equilibrium orbital-scale ripples, as summarized by , indicating that ripple evolution was quasi-steady. [Copyright &y& Elsevier]

Field observations are presented of the morphological evolution of beach cusps on a 1:10 slope, megatidal (8–12 m range), mixed sand-gravel beach at the head of the Bay of Fundy, Nova Scotia. Cusps had mean wavelengths of 3–6 m and displayed pronounced horn/bay sediment size segregation, with sand-sized material in the bays and gravel-sized material in the horns. Cusp occurrence was limited to the upper third of the beach face. Shoreline position during the tidal cycle was estimated at three minute intervals from time-averaged video imagery. Three cusp events are examined in detail, two exhibiting pronounced topographic relief, and the third demonstrating sensitivity of the rate of cusp evolution to the beach surface grain size distribution. Forcing conditions were weak, with significant offshore wave heights of 10–20 cm and peak periods of 4–7 s. Relict cusp morphology was inundated with the rising tide and destroyed or reworked during high tide. New cusps formed during the falling tide through a combination of accretion at the horns and erosion in the embayments. Timescales of growth and decay were short, ranging from 10 to 30 min. The location and dynamics of cusp horns appeared to depend on the high water line and its location relative to any pre-existing cusp morphology. The apparent sensitivity of cusp formation timescales to the local grain size distribution suggests that size segregation is intrinsic to the process of mixed sand-gravel cusp evolution. • Timescales of initial beach cusp emergence were of the order of 10 min. • The very broad grain-size distribution affects cusp evolution timescale. • Positions of emergent cusps were influenced by pre-existing morphology. • Cusp evolution was modulated by the 10-m range tide. [ABSTRACT FROM AUTHOR]

Highlights • BBL environment in the axis of Barkley Canyon (−985 m) is stable on time scales >1d and <3y. • Epibenthic megafaunal community is composed of species adapted to low oxygen levels. • Two major species of the community, C. tanneri and A. fimbria , are of fishery interest. • Seasonal variations are observed in the epibenthic megafauna of the axis of the canyon. • Inter-annual trends in abundance of major species is linked with "the blob" event. Abstract Understanding the impact of the environment on temporal trends in the composition and abundance of deep-sea species is essential for forecasting evolution of the community in the context of climate change. The recent development of deep-sea observatories enables multidisciplinary studies of long duration and high temporal resolution. We used a platform at the Ocean Networks Canada NEPTUNE Observatory located in the axis of Barkley Canyon between June 2012 and January 2015 to: (1) characterize the megabenthic community and the environmental conditions in the canyon; (2) investigate temporal patterns in the faunal community; and (3) determine the influence of environmental conditions on the observed patterns. The megafaunal epibenthic community, which included commercially important species, was composed of species known to be able to adapt to low oxygen conditions. A strong seasonal pattern characterized wind speed and direction, wave height, temperature, and chlorophyll concentration at the sea surface. The megafaunal epibenthic community exhibited seasonal patterns which were influenced by in-situ benthic boundary layer currents and temperature, weather conditions and chlorophyll concentration at the sea surface. At inter-annual scales, the surface temperature anomaly event observed in 2013 in the region could potentially impact the community structure with significant changes in species' densities, highlighting the need for long-term monitoring in the region. [ABSTRACT FROM AUTHOR]