Search

The portability of electronic-based biosensors is limited because of the use of batteries and/or solutions containing reactants such as enzymes for assay, which limits the utility of such biosensors in point-of-care (POC) testing. In this study, we report on the development of a self-powered biosensor composed of only portable components: a reactant-containing poly (ethylene glycol) (PEG) film for the colorimetric assay, and a self-powered n-InGaZnO/p-Si photodetector. The PEG film containing enzymes and color-developing agents was formed on a glass slide by spin coating. The self-powered biosensor was fabricated by placing the hybrid film on the p-n junction photodetector, and applied in non-invasive glucose detection (salivary glucose). Injection of the target-containing solution dissolved the PEG that led to the release of enzymes and color-developing agents, resulting in a colorimetric assay. The colorimetric assay could attenuate the light reaching the photodetector, thus facilitating target concentration verification by measuring the photocurrent. Our self-powered biosensor has two main advantages: (i) all components of the biosensor are portable and (ii) dilution of target concentration is avoided as the reagents are in the PEG film. Therefore, the self-powered biosensor, without solution-phase components, could be highly beneficial for creating portable, sensitive biosensors for POC testing. Image 1 • Development of a self-powered biosensor composed of solid components only. • Integration of a reactant-containing polymer film and a p-n junction photodetector. • Dilution of target solution was avoided when mixed with the components for assay. [ABSTRACT FROM AUTHOR]

Solid-phase, single-step biosensors are crucial for the development of portable, reusable, and convenient biosensors, otherwise known as point-of-care (POC) testing. Although high-performance single-step biosensors based on the principle of Förster resonance energy transfer (FRET) and using upconversion nanoparticles (UCNPs) functionalized with aptamers have been suggested as easy-to-use platforms, they lack portability and reusability when used for solution-phase biosensing. In this study, we describe a solid-phase, single-step aptasensor that showed higher performance than those of solution-phase aptasensors, as well as promising reusability. The solid-phase, single-step aptasensor was developed based on Au nanocap-supported UCNPs (Au/UCNPs), which were partially embedded in a solid substrate (e.g. polydimethylsiloxane, PDMS). The Au nanocaps allowed the UCNPs to emit upconverted light only from the restricted areas of the UCNPs, i.e., where they were not covered by the nanocaps and PDMS. Functionalization of an aptamer labeled with a quencher on the restricted area enabled the effective quenching of upconverted light from Au/UCNP via FRET after target (ochratoxin A, OTA) detection. The solid-phase, single-step aptasensor showed a linear range of 0.1–1000 ng mL−1 and limit of detection of 0.022 ng mL−1 within 30 min toward OTA. Furthermore, reusability of the solid-phase aptasensor was evaluated for three cycles of detection and regeneration, establishing its apparent reusability via heat treatment. Hence, such solid-phase, single-step aptasensors pave the path to the development of a portable and reusable biosensor platform for POC testing. Image 1 • Concept & design of solid-phase, single-step biosensors were demonstrated. • Fabrication based on Au nanocap-supported upconversion nanoparticles on PDMS. • Quencher-labeled aptamers functionalized onto exposed Au/nanoparticle area. • Sensitivity toward ochratoxin A was comparable to that of solution-phase sensor. • Reusability of solid-phase single-step aptasensor was successful via heat treatment. [ABSTRACT FROM AUTHOR]