Search

Light pipes transmit daylight into building interiors. Their installation into thermally insulated roofs of low energy buildings can be a problem because of thermal bridges and condensation problems. This article is focused on a CFD simulation thermal analysis that includes four variations of light pipes with a segment of a flat roof. Common light pipes with a hollow light guiding tube were compared to special light pipes containing an additional glass unit located inside the tube. The additional glass units increase thermal resistance and reduce condensation risks of the light guiding systems. The light pipes were compared in two different simulation models run in ANSYS Fluent software and the CalA program. Temperature profiles and air flow patterns of the cross sectional profiles of the light pipes served to determine the total heat transmittance and heat losses of the studied light pipes installed in a segment of a thermally insulated flat roof. The paper compares simplified 2D rotational–symmetrical numerical model based on the thermal diffusion equation with the complex 3D CFD numerical simulation. The results confirm that the simplified 2D numerical model is suitable for the thermal evaluation of the light pipes containing an additional glass unit, too. The additional glass unit with the triple glass improves thermal resistance up to 88% in case of light pipe with diameter 600 mm and reduces optical transmittance to 28%. [ABSTRACT FROM AUTHOR]

Abstract: Tubular light guides represent a convenient concept for illumination of windowless parts of buildings by natural light. The transmittance of this optical device generally varies with geometrical characteristics as diameter and length and also with its properties. A high light transmittance of the roof dome and diffuser as well as high quality of the inner reflective surface facing of the light guiding central duct are required. External daylight conditions such as sky cloudiness or sky luminance distribution have undoubtedly a vital influence on the tubular light guide efficiency. A daylight computer simulation study focused on an evaluation of the tube light efficiency is presented in the article. The efficiencies of straight tubular light guides are computed for the standard overcast and clear sky luminance distributions. The results obtained can be useful for predetermination of a luminous flux emanating a light guide, for evaluation of indoor daylighting, and for elaboration of various daylight strategies. [Copyright &y& Elsevier]

A comprehensive study of straight light pipe efficiency and illuminance distribution below ceiling level is performed using HOLIGILM tool. The recommendations for light guide systems can be made for different latitudes and sky luminance patterns using the data computed here. The computational results show that the light pipe transmittance is a monotonic function of solar altitude, except for low-sun angles. Redistribution of photons at the light pipe base can be characterized by a scalar value called “asymmetry parameter”, g . A use of g is an efficient attempt to the classification of a large number of luminous intensity distributions. The minimum value of g is at low solar elevations (between 10° and 30°) because of balanced contribution of diffuse light of a sky and the direct sunbeams. The low values of g indicate the redistribution of light is more uniform. Luminous intensity solid determined by means of HOLIGILM tool is used to compute illuminance distribution at a working plane. The peak intensity and intensity gradient of a bright ring projected onto a working plane can be used to characterize the optical properties of different light pipes in different climatic zones. [ABSTRACT FROM AUTHOR]

The SMART City concept is primarily associated with the European Union’s goals and strategies in the upcoming period and it is introduced in detail in the strategic EU document Europe 2020. The article describes the SMART Region concept being implemented in the Czech Republic environment. It introduces a pilot project in the city of Brno district – Nový Lískovec in the Czech Republic and its transformation from a prefabricated housing estate from the 1980s through energy efficient renovation of the entire city district towards a SMART City concept vision. The energy refurbishment concepts and strategies applied to the city district together with real post occupancy operation data of a reference prefabricated block of flats are summarized. The current research activities related to the indoor climate in the prefabricated block of flats and energy efficiency of the whole city district region are further specified. The future research tasks, municipality visions, and targets to become a SMART Region city district are discussed. [ABSTRACT FROM AUTHOR]