Search

Graphical abstract Highlights • Separation of concrete and brick particles was performed from recycled CDW aggregates. • An air jigging-based separation method and parameters were proposed. • Separation achieved with the recycled concrete aggregate (RCA) purity of 95 wt.%. • Advanced sorting solution can achieve more valuable recycled aggregates. Abstract The quality of recycled aggregates from construction and demolition waste (CDW) is strictly related to the content of porous and low strength phases and is specifically related to the high content of brick particles, despite representing approximately 50 wt.% of the total recycled aggregates. This paper focus on air jigging separation studies for removing brick particles from recycled construction and demolition waste aggregates. The operational parameters were achieved by studying the aggregate movement trajectories based on the small specific density differences of 2.52 g/cm3 and 1.97 g/cm3. Separation tests were conducted with a binary mixture of concrete and brick particles ranging from 5 to 10 mm for three operational parameters. The attained results confirmed that the brick fraction increases the water absorption and compromises the consistency and strength of the recycled aggregates. The proposed air jigging separation method was effective at reducing brick particle content and producing significant recycled concrete aggregates with a purity of 95 wt.%, paving the way for greater use of recycled aggregates in high grade applications, such as concrete and pavement layers. [ABSTRACT FROM AUTHOR]

The unplanned anthropogenic activities and raced industrial revolution detrimentally causes serious threat to terrestrial and aquatic life. A high discharge of wastewater from industries using dyes affects living organisms and the environment. This paper presents studies on polycationic selenides (PCS) synthesized by hydrothermal methods for photocatalytic degradation of dyes. The synthesized PCS were confirmed by various characterization techniques such as FTIR, SEM, EDX, UV/Vis, and XRD. The FTIR spectra revealed characteristic band at 843, 548 cm−1, and 417 cm−1 due to the M − Se stretching and intrinsic stretching vibrations, respectively. The optical bandgap of polycationic selenide lies in the visible light region (2.36 eV). The SEM images showed that PCS has a spherical shape with an average crystallite size of 29.23 nm calculated from XRD data using Scherer's equation. The PCS has a point of zero charge (PZC) at pH 7. The efficiency of synthesized PCS photocatalyst was confirmed in terms of its activity towards Eosin (EY) and Crystal violet (CV) dyes mineralization. The photocatalytic degradation for EY and CV dyes at optimum conditions was 99.47% and 99.31% and followed second order reactions kinetics with 1.4314 and 0.551 rate constant, respectively. The polynomial quadratic model is the best-fitted response surface methodology (RSM) model having a maximum desirability factors value and significant terms, with R2 (0.9994) and adj R2 values (1.0). [Display omitted] • Green fabrication of new ternary metallic selenides nanostructured materials. • Structural/morphological characteristics of ternary metallic selenides by advanced techniques. • Efficient photocatalytic degradation of textile contaminants under sunlight irradiation. • Operating factors influencing the degradation phenomena are investigated. [ABSTRACT FROM AUTHOR]