Search

This study aimed to characterize the decellularization effects of different treatment protocols on the bovine dental pulp extracellular matrix (ECM) for tissue regeneration. Seven different decellularization protocols consisting of trypsin/EDTA (for 1 hour, 24 hours, or 48 hours), sodium dodecyl sulfate (SDS, for 24 hours or 48 hours), Triton X-100 (for 1 hour), and deoxyribonuclease treatments were tested on bovine dental pulp tissue. The posttreatment samples were evaluated for remaining DNA and cellular contents, structural durability, immunofluorescence analysis, and in vivo immune responses. A complete decellularization process in all of the experimental groups was observed. The protocol that included 1 hour of Triton X-100 treatment and 12 hours of trypsin/EDTA treatment with no SDS treatment (P7 [12E-0S-1T]) showed the highest retention of glycosaminoglycan and the absence of nuclei in 4,6-diamidino-2-phenylindole. All groups showed significantly lower DNA content compared with native pulp tissue (P <.05), whereas compared with other protocols, protocols 1 (1 hour of EDTA/trypsin, 24 hours of SDS, and 1 hour of Triton X-100) and 4 (1 hour of EDTA/Trypsin, 48 hours of SDS, and no Triton X-100) resulted in the highest DNA contents (P <.05). Based on these results, P7 was further evaluated by immunofluorescence and in vivo immunogenicity. P7 specimens preserved collagen type I, whereas mononuclear cell infiltration along with neovascularization was observed in vivo. All tested treatments displayed the potential ability to decellularize pulp tissue and are viable options for a xenogeneic dental pulp ECM scaffold. The P7 (12E-0S-1T) protocol resulted in decellularized ECM with minimal organic matrix/ultrastructural detriments and an acceptable host immune response. [ABSTRACT FROM AUTHOR]

Recent studies suggest xenogeneic extracellular matrices as potential regenerative tools in dental pulp regeneration. This study aimed to fabricate and characterize a novel three-dimensional macroporous pulp-derived scaffold that enables the attachment, penetration, proliferation and differentiation of mesenchymal stem cells. Bovine pulp was decellularized and characterized with histological and DNA content methods. This scaffold was prepared using finely milled lyophilized decellularized pulp extracellular matrix (ECM) digested with pepsin. Three different concentrations of ECM (1.50, 2.25 and 3.00 mg/ml) were freeze-dried and were tested with/without chemical crosslinking. The specimens were subjected to physicochemical characterization, cell viability and quantitative real time polymerase chain reaction assessments with human bone marrow mesenchymal stem cells (hBMMSCs). All scaffolds were subcutaneously implanted in rats for two weeks and histological and immunostaining analyses were performed. Histological and DNA analysis confirmed complete decellularization. All samples demonstrated more than 97% porosity and 1.50 mg/ml scaffold demonstrated highest water absorption. The highest cell viability and proliferation of hBMMSCs was observed on the 3.00 mg/ml crosslinked scaffolds. The gene expression analysis showed a significant increase of dmp-1 and collagen-I on 3.00 mg/ml crosslinked scaffolds compared to the other scaffolds. Histological examination of subcutaneous implanted scaffolds revealed low immunological response, and enhanced angiogenesis in cross-linked samples compared to non-crosslinked samples. The three-dimensional macroporous pulp-derived injectable scaffold developed and characterized in this study displayed potential for regenerative therapy. While the scaffold biodegradability was decreased by crosslinking, the biocompatibility of post-crosslinked scaffold was significantly improved. [ABSTRACT FROM AUTHOR]

This study aims to develop and characterize the regenerative potential of an atelopeptidized treated dentin matrix xenograft using in vitro and in vivo models. Freshly extracted bovine dentin was pulverized into 250- to 500-μm particles and demineralized with 17% EDTA for 1, 7, and 13 days. The samples were atelopeptidized with pepsin. The degree of demineralization and the effect of atelopeptidization were assessed using field emission scanning electron microscopy combined with energy-dispersive X-ray spectroscopy and Fourier transform infrared spectroscopy, respectively. The expression of dentin matrix acidic phosphoprotein 1, dentin sialophosphoprotein, and osteopontin was evaluated in dental pulp stem cells using quantitative real-time polymerase chain reaction. The samples were then implanted intramuscularly in rats for 30 days, and the inflammatory cells were quantified histologically. Field emission scanning electron microscopy combined with energy-dispersive X-ray spectroscopy revealed an exposed tubular structure of dentin after 1 and 7 days of demineralization. Fourier transform infrared spectroscopy confirmed the absence of amide peaks at 1260 to 1640/cm after atelopeptidization. The dental pulp stem cell expression of dentin matrix acidic phosphoprotein 1 and dentin sialophosphoprotein increased in all compared with the untreated control group (P <.05). The maximum expression rates were observed for the 1-day demineralized and atelopeptidized group. The 1-day demineralized group elicited the highest inflammatory response compared with the 7- or 13-day demineralized groups (P <.001). Atelopeptidization significantly decreased the inflammatory response only in the 1-day demineralized dentin group (P <.05). Atelopeptidization of 1-day demineralized dentin xenograft preserved the collagen structure, minimized the immune reaction, and provided sufficient regenerative potential. [ABSTRACT FROM AUTHOR]

Mass fabrication of sodium alginate nanofibers using single-nuzzle electrospinning process is an open challenge mainly due to its inter- and intramolecular hydrogen bonding, rigid chain conformation and low solubility. In this regards, we synthesized sodium sulfated alginate (SSA) through sulfation of hydroxyl functional groups of alginate. Not only decreases the hydrogen bonding density through the sulfation reaction, but the sulfated alginate also demonstrates more solubility in aqueous media compared to the pristine alginate. Beside the sulfation of alginate, its electrospinnability in combination with polyvinyl alcohol (PVA) significantly improves. In contrast to the neat alginate, concentrated aqueous solutions of sulfated alginate, 10 wt%, can be easily prepared and electrospun to obtain nanofibers of sulfated alginate. In this regards, facile fabrication of electrospun nanofibers of alginate derivatives with 50 wt% content in dry electrospun mat of SSA/PVA using single-nuzzle electrospinning and flow rate of 5 mL h −1 was developed for the first time. [ABSTRACT FROM AUTHOR]

Injectable biomaterials that can completely fill the root canals and provide an appropriate environment will have potential application for pulp regeneration in endodontics. This study aimed to fabricate and characterize a novel injectable human amniotic membrane (HAM) hydrogel scaffold crosslinked with genipin, enabling the proliferation of Dental Pulp Stem Cells (DPSCs) and optimizing pulp regeneration. HAM extracellular matrix (ECM) hydrogels (15, 22.5, and 30 mg/ml) crosslinked with different genipin concentrations (0, 0.1, 0.5, 1, 5, and 10 mM) were evaluated for mechanical properties, tooth discoloration, cell viability, and proliferation of DPSCs. The hydrogels were subcutaneously injected in rats to assess their immunogenicity. The hydrogels were applied in a root canal model and subcutaneously implanted in rats to determine their regenerative potential for eight weeks, and histological and immunostaining analyses were performed. Hydrogels crosslinked with low genipin concentration demonstrated low tooth discoloration, but 0.1 mM genipin crosslinked hydrogels were excluded due to their unfavourable mechanical properties. The degradation ratio was lower in hydrogels crosslinked with 0.5 mM genipin. The 30 mg/ml-0.5 mM crosslinked hydrogel exhibited a microporous structure, and the modulus of elasticity was 1200 PA. In vitro, cell culture showed maximum viability and proliferation in 30 mg/ml-0.5 mM crosslinked hydrogel. All groups elicited minimum immunological responses, and highly vascularized pulp-like tissue was formed in human tooth roots in both groups with/without DPSCs. Genipin crosslinking improved the biodegradability of injectable HAM hydrogels and conferred higher biocompatibility. Hydrogels encapsulated with DPSCs can support stem cell viability and proliferation. In addition, highly vascularized pulp-like tissue formation by this biomaterial displayed potential for pulp regeneration. [ABSTRACT FROM AUTHOR]