Search

Abstract: A theoretical simulation was carried out for predicting the critical heat flux (CHF) of convective boiling for a round saturated water jet impingement on the stagnation zone of a hot surface. The study was focused on the effect of the solid–liquid contact angle on the CHF. A theoretical model based on the Long wave instability was applied to calculate the maximum liquid sub-film thickness under boiling bubbles and finally a semi-empirical and semi-theoretical correlation was proposed by combining the simulated calculation and the experimental data from the common metal heating surface. The correlation revealed the comprehensive effects of solid–liquid contact angles, jet velocity and jet diameter on the CHF and agreed well with the experimental data proposed by authors in the previous study. [Copyright &y& Elsevier]

Abstract: In this study, the coating process on the copper surface with titanium dioxide (TiO2) has been introduced. The coated surface exhibits extremely high affinity for water and the solid–liquid contact angle decreases nearly to zero by exposing the surface to ultra-violet light. This superhydrophilic characteristic was applied to nucleate boiling heat transfer of water jet impingement on a flat heated plate. By making use of this special heat transfer surface, the nucleate boiling heat transfer and the critical heat flux (CHF) of a bar water jet impingement on a large flat superhydrophilic surface was experimentally investigated. The experimental data were measured in a steady state. The purified water was employed as the working liquid. Three main influencing factors, i.e., subcooling, impact velocity and the surface coating condition, were changed and their effects on the nucleate boiling heat transfer and the CHF were investigated. The empirical correlations were obtained for predicting the CHF of steady boiling for a small round water jet impingement on a large flat superhydrophilic surface. The experimental results show that the CHF on the superhydrophilic surface is about 30% higher than that on conventional copper surface by decreasing the solid–liquid contact angle. [Copyright &y& Elsevier]

Abstract: An experimental investigation was carried out for predicting the critical heat flux (CHF) of convective boiling of saturated liquids for a round jet impinging on the horizontal jet stagnation zone. The model of maximum liquid subfilm thickness based on the Helmholtz instability was used to derive a semi-theoretical equation. The experimental data of four liquids: water, ethanol, R-113 and R-11 were employed to determine the correlation factor. The impact velocity ranged from 0.5m/s to 10m/s and the diameters of the jet nozzle ranged from 3mm to 10mm. A semi-theoretical correlation was proposed for predicting CHF of convective boiling for saturated liquids jet impinging on the stagnation zone in a wide range. [Copyright &y& Elsevier]