Search

Although it is thought that there is a relationship between neck pain and scapular dysfunction, there are controversial results and no clear information in the literature regarding this issue. This study aimed to investigate the alterations in the 3-Dimensional scapular orientation on patients with non-specific neck pain. Thirty-four patients with chronic non-specific neck pain [age, 29.1 (5) years; height, 165.3 (6.1) centimeters; weight, 62.1 (9.6) kilogram] and 29 healthy controls [age, 28.2 (3.3) years; height, 166.8 (8.1) centimeters; weight, 60.9 (8.5) kilogram] were included in the study. 3-Dimensional scapular kinematics were obtained during arm elevation and lowering trials in the sagittal, scapular, and frontal planes. Compared to healthy controls, the patients with neck pain demonstrated significantly reduced upward scapular rotation on both the dominant and non-dominant sides in all three planes. Patients with neck pain had increased internal rotation in the sagittal and frontal planes on the dominant side and increased external rotation in the frontal plane on the non-dominant side. No difference was observed between groups considering posterior scapular tilt. There are alterations in the 3-Dimensional scapular orientations in patients with chronic non-specific neck pain compared to healthy controls. Therefore, the scapular control may also be examined in patients with neck pain and it can be included in the rehabilitation program if needed. • Patients with neck pain demonstrate alterations on the dynamic scapular control. • Altered scapular control may cause abnormal loads on the cervical region. • Scapular region also needs to be assessed on patients with neck pain. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to investigate the scapular kinematics during dynamic humeral movements in patients with arthroscopic anterior capsulolabral repair of the shoulder along with the potential biomechanical corrective effects of scapular stabilization taping.Methods: Twenty patients with unilateral traumatic anterior shoulder instability and arthroscopic anterior capsulolabral repair participated in the study. Dynamic shoulder kinematics were assessed during the scapular plane shoulder elevation for both the operated and non operated shoulders and also under two conditions: no-taping and taping. Statistical analysis to compare sides and conditions was performed with analysis of variance models.Results: The scapula was more internally rotated position in operated shoulders than in non operated shoulders. Furthermore, the scapula was less internally rotated and more downwardly rotated at 120° of elevation in the taping condition.Conclusions: Operated shoulders demonstrated kinematics alterations when compared to non operated shoulders underwent arthroscopic anterior capsulolabral repair. Additionally, changes in the scapular orientation with the taping was very small but followed a pattern, which would be suggested to be an orientation that potentially produce more scapular stability and to increase stress on the inferior glenohumeral ligament. [ABSTRACT FROM AUTHOR]

There is very limited information about the changes in shoulder kinematics in patients with reverse shoulder arthroplasty. The aim of the study was to investigate the changes in the scapulohumeral rhythm and shoulder kinematics over time after the reverse shoulder procedure. Nineteen patients with reverse shoulder arthroplasty (age: 65.8 ± 10.3 years) were included to the study. During arm elevation in the sagittal and scapular planes, operated shoulder kinematics (humerothoracic elevation, glenohumeral elevation, scapulohumeral rhythm, and scapular rotations) were assessed using an electromagnetic tracking system at the postoperative 3rd, 6th, and 18th months. Asymptomatic shoulder kinematics were also assessed at the postoperative 18th month. Shoulder function was assessed using The Disabilities of the Arm Shoulder and Hand score at the postoperative 3rd, 6th, and 18th months. Maximum humerothoracic elevation increased from 98° to 109° over the postoperative period (p = 0.01). The scapulohumeral rhythm was similar on the operated and asymptomatic shoulders at the final follow-up (p = 0.11). Both the operated and asymptomatic shoulder demonstrated similar scapular kinematics at the postoperative 18th month (p > 0.05). The Disabilities of the Arm Shoulder and Hand score decreased over time in the postoperative period (p < 0.05). Shoulder kinematics may be improved after reverse shoulder arthroplasty in the postoperative period. Focusing on scapular stabilization and deltoid muscle control in the postoperative rehabilitation program may enhance the shoulder kinematics and upper extremity function. • Humerothoracic elevation increased over time after reverse shoulder arthroplasty • Scapulohumeral rhythm alters significantly in parallel with shoulder kinematics • Operated shoulder can demonstrate similar kinematics with asymptomatic shoulder • Scapular stabilization and deltoid control should be focused in the rehabilitation [ABSTRACT FROM AUTHOR]

Dissolved Gas Analysis (DGA) is one of the most common techniques to detect the incipient faults in the oil-filled power transformers. In this paper, a new approach of DGA technique is proposed to overcome the conflict that takes place in the traditional interpretation techniques for transformer fault diagnosis. The new approach is based on the analysis of 386 dissolved gas samples data set that collected from the Egyptian electric utility chemical laboratory as well as from credited literatures. These data sets are used to build the technique model and also as a tested data set to get the technique’s accuracy. The new approach DGA diagnoses the transformer fault types based on the gas concentration percentage limit of the sum of main five gases (Hydrogen (H 2 ), Methane (CH 4 ), Ethan (C 2 H 6 ), Ethylene (C 2 H 4 ), and Acetylene (C 2 H 2 )) and some suggested gases ratios depending on the sample data set analysis. The validation of the proposed approach of DGA technique is satisfied by comparing its results with the results of the IEC Standard Code, Duval triangle and Rogers methods for the collected data set. The results refer to the ability and reliability of the new approach in transformer faults diagnostic. [ABSTRACT FROM AUTHOR]

• PD activity was measured and analyzed for various defects in gas insulated switchgear. • PD diagnosis based on PD pulse sequence was proposed. • PD diagnosis was implemented using different machine learning classification techniques. • Naïve Bayes classification exhibited the highest diagnostic accuracy. Partial discharge (PD) diagnostics in Gas Insulated Switchgear (GIS) is important for reliable and secure operation of electrical utilities. Different techniques were used for PD diagnosis in GIS. In this work, PD diagnosis in GIS is proposed based on PD pulse sequence. PD pulse sequence only requires the measurement of PD phase appearance and its corresponding instantaneous voltage. The PD diagnosis of various defect types is implemented using five optimized machine learning classification techniques: decision tree classification, ensemble methods, k-nearest neighbouring, Discriminant analysis, and Naïve Bayes classification. The features used for PD pulse sequence are the voltage change and phase angle change between successive PD pulses. Three scenarios are proposed for predicting the defect types in GIS. The first scenario is built based on the extracted features for two successive PD pulses, the second scenario is built based on the extracted features for three successive PD pulses, while the last scenario is built based on the extracted features for four successive PD pulses. The results illustrate the superior detecting accuracy of the second scenario with the proposed five ML classification techniques. The optimized ML classification techniques are implemented and carried out based on MATLAB software package. The ensemble classification method exhibited the highest accuracy for PD-based diagnosis in GIS with an overall accuracy of 97.1%. [ABSTRACT FROM AUTHOR]

• A generalized algorithm to estimate the voltage drop across the TCSC is proposed. • The distance relay terminal voltage is compensated by the estimated TCSC voltage. • This algorithm is effective for TCSC capacitive or inductive modes. • The conduction angle of the TCR is estimated for the different synchronization modes. • The proposed adaptive distance relay is tested under different stress conditions. The variable performance of the thyristor-controlled series compensator (TCSC) system represents a vital challenge for conventional distance relays. Most existing algorithms are based on the measured data at two ends of the TCSC-compensated lines. However, some of single-end algorithms need to modify the distance relay for the series capacitor (SC) only. This paper introduces a generalized algorithm to estimate the voltage drop across the TCSC. The distance relay uses the estimated TCSC voltage drop for terminal voltage compensation. The second objective of the proposed algorithm is to estimate the conduction angle of the thyristor-controlled reactor (TCR) branch under different modes of operation. This algorithm is effective for different TCSC modes such as the capacitive or the inductive modes, in addition to the method of firing angle of synchronization current or voltage synchronization modes. The main benefit of the proposed algorithm is presenting a parameter-less distance scheme for TCSC-compensated transmission line. A 400-kV overhead transmission line test system is simulated in MATLAB/SIMULINK package® and the numerical modeling is implemented in the MATLAB® script in order to evaluate the proposed algorithm effectiveness. The proposed technique is tested under several stress conditions that may face the conventional distance relay. The results illustrate the effective performance of the proposed algorithm. [ABSTRACT FROM AUTHOR]

The purpose of this study was to examine the association of breast cancer-related lymphedema on shoulder girdle kinematics and upper extremity function. The study included 67 breast cancer survivors with and without unilateral lymphedema. Individuals were divided into non-lymphedema, moderate and severe lymphedema groups according to the volumetric measurement difference between the affected and unaffected upper extremities. A three-dimensional motion monitor-electromagnetic system was used to analyze scapular movements during the elevation and depression phases of the upper extremity elevation in the scapular plane. Shoulder range of motion was assessed with a digital inclinometer. Upper extremity function was assessed with the 'Disabilities of the Arm, Shoulder, and Hand Questionnaire–Short Form (Quick-DASH)'. The scapular upward rotation was lower for the severe lymphedema group than for the non-lymphedema group in the 90–60–30° depression phases of arm elevation (p <.05). The scapular anterior tilt was higher for the severe lymphedema group than for the non-lymphedema group in the 30° depression phase of arm elevation (p <.05). Shoulder abduction range of motion was the lowest in the severe lymphedema group (p <.05). The non-lymphedema group had the lowest quick-DASH score and the severe lymphedema group had the highest score (p <.05). There were statistically significant moderate associations between the quick-DASH scores and scapular movements in all groups (p <.05). The development, presence and/or severity of lymphedema were associated with impaired shoulder-girdle kinematics and decreased upper extremity function. However, a need exists for longitudinal studies comparing individuals with and without lymphedema and healthy controls. [ABSTRACT FROM AUTHOR]

• Present thermodynamic model to identify the severity of the fault. • Construct NPR model to detect the transformer fault type with its severity. • High diagnosing accuracy is observed using NPR. Dissolved gas analysis (DGA) is used to diagnose power transformer fault based on the concentration of dissolved gases and the ratios between them. These gases are generated in oils as a result of electrical and thermal stresses, but these DGA techniques cannot identify the severity of the fault types. In IEEE Standard C57.104, the maintenance action is taken based on the total dissolved combustible gases, which is not sufficient because it ignores the importance of the gas type and its change rate. Thermodynamic theory using different starting decomposing materials, namely, n-octane (C 8 H 18) and eicosane (C 20 H 42), is used to estimate the severity of transformer fault types. Two scenarios are suggested with different data transformation techniques to enhance neural pattern-recognition (NPR) method accuracy for predicting transformer fault types and their severity classes. The proposed scenarios are built based on 446 samples collected from the laboratory and literature. Results refer to the role of the starting decomposing material on the severity of the transformer fault and illustrate that the proposed model has a higher accuracy (92.8%) compared with other DGA methods for diagnosing transformer fault types and superior accuracy (99.1%) to predict fault severity class. [ABSTRACT FROM AUTHOR]

Stenotrophomonas maltophilia is an emerging pathogen that can cause several disease manifestations such as bacteremia, meningitis, respiratory tract infections and others. More seriously, this pathogen has a highly evolving antibiotic resistance profile. Antibiotic misuse is further aggravating the situation by inducing the development of multi- and even pan-resistance. Thus, employing diverse strategies to overcome this increasing antibiotic resistance is of paramount importance. In general, vaccination is one of these strategies that prevents the onset of infection, provides long term protection against infection, and most importantly diminishes the antibiotic consumption, thus, resulting in controlling resistance. Unfortunately, vaccine research concerning S. maltophilia is very scarce in the literature. Ax21 protein is an outer membrane protein implicated in several virulence mechanisms of S. maltophilia such as quorum sensing, biofilm formation, and antibiotic resistance. Our computational analysis of Ax21 revealed its potential immunogenicity. In the current study, Ax21 protein of S. maltophilia was cloned and heterologously expressed in Escherichia coli. Mice were immunized with the purified recombinant antigen using Bacillus Calmette-Guérin (BCG) and incomplete Freund's adjuvant (IFA) as immune-adjuvants. Enzyme-linked immunosorbent assay (ELISA) revealed significant antigen-specific IgG1, IgG2a and total IgG levels in immunized mice which reflected successful immune stimulation. Immunized mice that were challenged with S. maltophilia showed a substantial reduction in bacterial bioburden in lungs, liver, kidneys, and heart. In addition, liver histological examination demonstrated a remarkable decrease in pathological signs such as necrosis, vacuolation, bile duct fibrosis and necrosis, infiltration of inflammatory cells, and hemorrhage. Whole cell ELISA and opsonophagocytic assay confirmed the ability of serum antibodies from immunized mice to bind and facilitate phagocytosis of S. maltophilia, respectively. To our knowledge, this is the first report to demonstrate the vaccine protective efficacy of Ax21 outer membrane protein against S. maltophilia infection. [ABSTRACT FROM AUTHOR]

Enterococcus faecium is evolving as a multi-resistant pathogen causing infections with high morbidity and mortality. A protective vaccine against E. faecium is lacking up till now. ATP-binding cassette (ABC) transporter proteins have important functions in bacteria to maintain survival and homeostasis. In the present study, we evaluated the basic membrane protein (BMP) family ABC transporter substrate-binding protein, designated herein as BMP, as a potential vaccine candidate against E. faecium. Recombinant BMP of E. faecium was expressed in Escherichia coli, and purified by metal affinity chromatography. Swiss albino mice were immunized with the recombinant BMP combined with Bacillus Calmette–Guérin (BCG) and/or alum as adjuvants. Mice immunized with BMP combined with alternating BCG and alum developed BMP-specific IgG and were protected against E. faecium challenge as evidenced from organ bioburden and histopathological examination. Furthermore, serum from immunized mice showed enhanced opsonophagocytic activity and protected mice against E. faecium challenge by passive immunization. Bioinformatic analysis revealed appreciable degrees of homology between E. faecium BMP and proteins from other pathogens which suggests BMP could be a useful vaccine against multiple pathogens. To our knowledge, this is the first report of in-vivo evaluation of BMP as a potential vaccine candidate against E. faecium. [ABSTRACT FROM AUTHOR]

Background: Shoulder pain is a common symptom for non-traumatic shoulder pathologies and affects 4.7-66.7% of entire population. Even with the latest technological advantages, palpation still is a cost and time efficient tool to evaluate the shoulder pathologies. Our aim was to investigate and compare palpation findings in different shoulder pathologies.Method: We used first assessments of impingement syndrome (IS) (n = 205), rotator cuff tear (RCT) (n = 185) and frozen shoulder (FS) (n = 210) patients who received treatment between 2010 and 2019 years. Two experienced physiotherapists palpated predefined points: long head of biceps brachii, pectoralis minor, lateral intermuscular septum, proximal tendons of extensor group. These points categorized into "proximal", "mid-proximal", "mid-distal", "distal", "irregular". We also grouped patients by their BMIs.Results: We found RCT patients had higher BMI than IS and FS patients (p < 0.001, p = 0.001); more tender intermuscular septum points and night pain than IS patients (p = 0.001, p = 0.003) and more extensor group proximal tendon points than IS and FS patients (p < 0.001, p = 0.001). "No tenderness" group had lesser resting pain than distal group (p < 0.001) and lesser activity and night pain than middle-proximal, middle-distal, and distal groups (all ps < 0.002). Distal group had higher night pain than middle-proximal group (p = 0.003). Morbidly obese patients had higher night pain than normal and overweight patients (p = 0.003 and p = 0.009).Conclusions: Tender point distribution varies depending on the pathology with biceps brachii being the most common. RCT patients had higher night pain related to more distal tender points. Patients with higher night pain had increased tenderness in septum intermuscular and extensor muscles' proximal tendons. [ABSTRACT FROM AUTHOR]

• A new technique is proposed to detect and classify the PV system fault states. • The technique based on mapping the rate of changes of voltage and current. • The design of the PV system is implemented by installing one diode in every string. • The proposed technique is verified by modelling and experimentally. • This technique is sensitive to internal and stable for external PV array faults. This paper proposes a new simple technique to detect and discriminate the abnormal states of the grid-connected photovoltaic (PV) solar system based on the rate of change of voltage and current trajectory. The design of the PV system is developed by implementation of only one diode in every PV string. The diode prevents the reverse direction of the fault current in case of faulty strings. On the other hand, the installation of a diode reduces the ability of faults detection and diagnosis depending on currents in each string. The proposed technique depends on the rate of change of voltages and current trajectory during the fault transient period. The proposed algorithm can detect various fault cases such as cell-to-cell and string to string faults in addition to partial and full shadow faults. Also, the algorithm differentiates between high and low fault cases for each fault types. Moreover, the proposed technique is characterized by high sensitivity for internal abnormal states within certain array with high security level for the external abnormal conditions and normal load changing. The proposed technique is applied for a four-array PV system, which has a power rating of 400 kW connected to an AC grid. The simulation results and validation of the proposed technique are implemented by MATLAB/Simulink toolbox. The proposed technique is experimentally applied for a small PV system of a rating of 1.25 kW to prove its validity. [ABSTRACT FROM AUTHOR]

Worldwide, the emerging trend of hybrid renewable energy sources integration in modern power systems is increasing due to privileged prices and clean electricity supply. However, the optimal planning of rural hybrid systems is a challenging and complex task, especially when different alternatives and sustainability aspects are considered. This paper develops an integrated decision-making approach for the optimal planning of a 100% renewable energy supply system comprising solar, wind, hydro, and biomass sources in a rural area located in Pakistan. An hourly-based design optimization analysis of twelve on/off-grid electrification alternatives is performed. The optimization model simultaneously addresses five sustainability criteria related to economy, reliability, ecology, society, and topography aspects. Furthermore, a novel hybrid decision-making model has developed to identify the unique best configuration with on-grid and off-grid options. The proposed model combines fuzzy analytic hierarchy process, multi-objective optimization based on ratio analysis technique for order of preference by similarity to an ideal solution, and evaluation based on distance from average solution methods. The results reveal that the solar-hydro-biomass battery with a life cycle cost of 10.9 M$ is the top-ranking off-grid system. When the hybrid system is connected to the grid, the solar-hydro-battery has found the most appropriate design with a life cycle cost of 12.96 M$. Both scenarios have a negligible capacity shortage of 0.09%. Ecologically, the optimal off-grid system produces only 408.37 kg/yr of CO 2 due to the significant energy share of solar and hydro sources (99.3%). The optimal on-grid system produced the minimum CO 2 with 29,177.89 kg/yr compared to other alternatives. Also, employing the optimal on/off-grid designs require land area and jobs of 96.6 m2, 14 jobs, and 118 m2, 15 jobs, respectively. Overall, the developed approach with the presented case study offers a valuable benchmark and guidelines for investors and stakeholders to create realistic investment plans for the energy industry looking to push efficient inducements to encourage the high dissemination of renewables. [Display omitted] • 100% renewable energy system is established for on/off grid rural electrification. • Twelve distinctive solar/wind/hydro/biomass-based hybrid energy alternatives are optimized. • An integrated fuzzy-AHP/TOPSIS/EDAS/MOORA decision-making model is proposed. • Cost, reliability, emission, social, and topographical criteria are simultaneously considered. • Results prove the long-term sustainability of 100% renewable in rural Pakistan. [ABSTRACT FROM AUTHOR]

This study provides a decision support approach for selecting the best size of the main components of a small scale solar assisted, silica gel-water, adsorption cooling system in arid areas located in Assiut, Egypt. To achieve the objective of this work, an optimization based on a computer simulation has been performed on the design variables, which are: solar collector area, the volume of the hot storage tank, the volume of the cold storage tank, and thermostat set point of the auxiliary heating element. Economic and environmental evaluations of the proposed systems have been performed as well. A validation of the model results is performed with the experimental results of solar driven silica gel-water adsorption cooling system at Assiut University Campus which has worked since 2012. The results show that the tilt angle of 5 ° for the surface of the solar collectors achieved the best absorbed solar radiation by the collector filed. For all proposed systems, the solar fraction did not affect the volume of the cold water storage tank while it has a significant effect on the area of the solar collector field and as well as the volume of the hot water storage tank. The initial cost of the proposed systems ranges from 2897 €/kWc to 4808 €/kWc and this can be considered as a hindrance to spreading at the commercial level. Meanwhile, the running cost over a year achieves low values, and it ranges from 13.9 €/kWc to 99.11 €/kWc.The proposed systems of lower solar fraction give lower carbon dioxide emissions. The carbon dioxide emissions range from193 kg of CO 2eq. /kWc per year for the fully solar driven cooling system to 1062 kg of CO 2eq. /kWc per year for the cooling system fully driven by natural gas. Based on the solar saving approach the proposed system of 24 m 2 solar collector area, 0.6 m 3 hot storage tank, and 1 m 3 cold storage tank with 94 °C auxiliary heater set-point temperature can be considered as the most economically feasible solution. [ABSTRACT FROM AUTHOR]

• Model for the design and control of an off-grid 100% renewable system is proposed. • Nine alternatives of solar/wind/different storages are modelled and optimized. • Evaluation criteria are cost, emission, and load voltage/frequency constancy. • Solar/wind/lead-acid battery shows the most economic and reliable alternative. • Lead-acid battery/supercapacitor is more efficient than battery only. The continuous rise of global electricity demand and significant dependency on fossil fuel-based centralised power plants are the main indicators of increasing greenhouse gas emissions, thus negatively affecting climate change and human health and increasing the earth temperatures. This alarming situation has demanded the transition to 100 % renewable energy to decarbonise energy use. However, the fluctuating weather resources, and high investment cost are the major challenges with renewable energy implementation. In this context, the combined integration of multiple sources with energy storage in a so-called hybrid renewable energy system was developed as a durable remedy for the previous issues. This paper proposes a joint and conceptual approach for techno-economic design and dynamic rule-based power control of an off-grid solar/wind hybrid renewable energy system integrated with a hybrid energy storage system that comprises a lithium-ion battery, lead-acid battery, and a supercapacitor. Such concurrent integration of 100 % renewable energy systems and hybrid energy storage systems is lacking in the existing literature. First, with the aid of HOMER software, the feasibility and optimisation analysis of nine different configurations was performed in 1 min resolution to find the optimal component sizes. Second, MATLAB/Simulink models were assembled for the winning design based on a dynamic rule-based strategy to investigate and analyse the system's dynamic response, power equilibrium, DC-bus voltage supervision and load voltage/frequency control against instantaneous and dynamic changes in the load or renewable energy resources. The proposed approach was promoted and validated on an actual case study for isolated residential community electrification in Saudi Arabia, in which a multi-tier framework was adopted to accurately simulate the stochastic energy consumption of the community's households. From the design results, the hybrid renewable energy system, which integrates solar, wind, lead-acid batteries, and converter with optimal capacities of 55 kW, 18 kW, 325 kWh and 42 kW converter, respectively, is the most cost-effective alternative with the minimum net present and energy costs of $232,423.3 and $0.3458/kWh, respectively. The system has the least unmet load with 13.5 kWh/years (0.02 %), thus ensuring maximum reliability and customer satisfaction. Meanwhile, the developed control strategy efficiently improved the dynamic response, the DC-bus voltage stability, and the load voltage/frequency during different climatological and load interruptions. Further, the use of lead-acid batteries and supercapacitors has effectively diminished the maximum overshoot of the DC-bus and load voltages by 50 % during all disturbances. In addition, the integration of supercapacitors proficiently saved 2.3–6 kW during wind speed change and 2–9 kW during simultaneous changes in the radiation and load. Overall, the presented method, together with the reported results, provides an improved understanding and highlights the extent to which the successful integration of hybrid renewable energy system and hybrid energy storage system can be used to develop reliable and sustainable energy access for off-grid areas. [ABSTRACT FROM AUTHOR]

• The analyses and reductions of backflow lightning overvoltages of the PV power plants. • High-frequency models for all PV plant components (air-termination, grounding system, surge protective devices, PV string, inverters, underground cables, and power transformers) using the ATP/EMTP simulation software. • Design the PV grounding system using COMSOL Multiphysics. • Evaluate the PV grounding system toward decreasing the backflow lightning overvoltage magnitudes. Photovoltaic (PV) systems are subjected to lightning strikes that contribute to losing their sustainable electrification service. Furthermore, they are subjected to backflow lightning overvoltages due to the installation in high soil resistivity areas, however, such the study is not aforementioned well in the literature. Therefore, the analyses and reductions of backflow lightning overvoltages are investigated in this paper, considering a PV power plant as an example installed in Taif city, KSA. All PV plant components are modeled using high-frequency models, in which they are such as air-termination, grounding system, surge protective devices, PV string, inverters, underground cables, and power transformers. To decrease the lightning overvoltages in the PV power plant, a modified PV grounding system design is introduced and evaluated. The evaluation is performed considering step voltage profiles using COMSOL Multiphysics and backflow lightning overvoltage magnitudes at different points in PV plant using ATP/EMTP. The results provide the motivation of studying backflow lightning overvoltages in PV plants and evidence of the efficacy of the proposed grounding system design in reducing the overvoltage magnitudes. [ABSTRACT FROM AUTHOR]