Search

Additively manufactured Fe-Cu alloys contain both equilibrium face-centered cubic (FCC) and metastable body-centered cubic (BCC) crystal structure Cu precipitates depending on their size. However, the stability of these nanoscale precipitates under extreme conditions such as high pressures has not been reported. This study investigates the phase transformations and microstructural stability of laser directed energy deposition (DED-LB) made Fe67Cu33 alloy (nominal composition in at.%) under high static pressure deformation using in-situ synchrotron X-ray diffraction under pressure, postmortem high-resolution scanning transmission electron microscopy (HR-STEM), and molecular dynamics (MD) simulations. In-situ XRD results reveal a reversible phase transformation from BCC to the hexagonal close-packed (HCP) structure in the Fe grains at an onset pressure of 16.4 GPa, significantly higher than reported in the literature for pure Fe. Although no high-pressure phase transition was observed in the FCC Cu grains through XRD, HR-STEM analysis uncovers a phase transition to the HCP structure in nanoscale metastable BCC Cu precipitates within the BCC Fe matrix. After decompression, the Fe matrix reverted back to the BCC structure with periodic lath martensite, while regions of the nanoscale BCC Cu precipitates retained the metastable HCP structure. MD simulations support the BCC → HCP transition in the embedded nanoscale coherent Cu precipitates, consistent with the classical Burgers mechanism. Thus, by leveraging in-situ XRD observation, postmortem high-resolution S/TEM microscopy, and MD simulations, this study offers profound insights into the distinctive phase transformations induced by high pressure in DED-LB Fe67Cu33 alloy, which is distinguished by its hierarchical microstructure. [Display omitted] [ABSTRACT FROM AUTHOR]

We have performed high-pressure structural, electrical, and thermal property measurements on half-Heusler thermoelectric compound, TiCoSb. High-pressure powder diffraction measurements have been performed in an angle-dispersive geometry using synchrotron x-rays up to 115 GPa using a diamond anvil cell. The results show the cubic crystal structure ( F-43m ) stable and no pressure induced structural phase transitions were observed over the entire pressure range. The electrical and thermal properties were studied up to 5 GPa using a Paris-Edinburgh press equipped with a specialized sample cell assembly. The compressibility, variation of thermal conductivity, Seebeck co-efficient and thermoelectric figure of merit (ZT) for the material are discussed in detail. [ABSTRACT FROM AUTHOR]