Search

Complex and heterogeneous structures of lignin impede its further conversion and valorization. Herein, three technical lignins (from softwood, hardwood, and grass) were fractionated with acetone solvent to reduce their structural heterogeneity, which were then blended with poly-(butylene adipate-co-terephthalate) (PBAT) to fabricate biodegradable bio-composites. Macromolecular structures of lignins and their effects on the properties of lignin/PBAT composites were thoroughly investigated. Results showed that all fractionated lignin composites displayed better properties. Particularly, the raw and fractionated softwood lignin-based composites exhibited superior performance compared with others. Benefiting from the lower molecular weight, hydroxyl groups, and condensation, acetone fractionated softwood lignin presented the lowest T

Antimicrobial starch/PBAT films with the combination of silver nanoparticles (AgNPs) and zinc oxide nanoparticles (ZnONPs) were prepared by extrusion blowing. SEM demonstrated the relatively homogeneous distribution of nanoparticles on the fracture surfaces of the nanocomposite films. The incorporation of nanoparticles improved mechanical and barrier properties of the film. The UV-vis spectroscopy revealed that the SP-ZnO(1) film had the highest UV-absorbance. The inhibition effects of the nanocomposite films against both Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria were observed. The antimicrobial efficiency of SP-Ag(0.8)-ZnO(0.2) and SP-Ag(0.6)-ZnO(0.4) films reached more than 95% within 3 h of contact. The combination of AgNPs and ZnONPs into starch/PBAT blends showed synergistic effects on improving material properties and antimicrobial efficiency of the films. Furthermore, preliminary packaging studies on peaches and nectarines revealed that the antimicrobial films inhibited spoilage of fresh produce and extended their shelf life compared with commercial LDPE packaging films.

Poly(butylene adipate-co-terephthalate) (PBAT), a bioplastic consisting of aliphatic hydrocarbons and aromatic hydrocarbons, was developed to overcome the shortcomings of aliphatic and aromatic polyesters. Many studies report the use of PBAT as a blending material for improving properties of other bioplastics. However, there are few studies on microorganisms that degrade PBAT. We found six kinds of PBAT-degrading microorganisms from various soils. Among these, Bacillus sp. JY35 showed superior PBAT degradability and robustness to temperature. We monitored the degradation of PBAT films by Bacillus sp. JY35 using scanning electron microscopy, field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatography. GC-MS was used to measure the PBAT film degradation rate at different temperatures and with additional NaCl and carbon sources. Certain additional carbon sources improve the growth of Bacillus sp. JY35. However, this did not increase PBAT film degradation. Time-dependent PBAT film degradation rates were measured during three weeks of cultivation, after which the strain achieved almost 50% degradation. Additionally, various bioplastics were applied to solid cultures to confirm the biodegradation range of Bacillus sp. JY35, which can degrade not only PBAT but also PBS, PCL, PLA, PHB, P(3HB-co-4HB), P(3HB-co-3HV), P(3HB-co-3HHx), and P(3HB-co-3HV-co-3HHx), suggesting its usability as a superior bioplastic degrader.

Di-n-butyl adipate (DnBA) is used as a plasticizer and in various consumer products (e.g. personal care products) replacing, in part, the endocrine disruptor di-n-butyl phthalate (DnBP). We provide quantitative in vivo data on human DnBA metabolism and excretion after oral dose (105-185 μg/kg bw) and dermal application to three volunteers each as a tool for exposure and risk assessment. Complete and consecutive urine samples were collected for two (oral) and four days (dermal), respectively, and analyzed for the metabolites mono-n-butyl adipate (MnBA), 3- and tentative 4-hydroxy-mono-n-butyl adipate (3OH-MnBA, 4OH-MnBA), and 3-carboxy-mono-n-propyl adipate (3cx-MnPrA), as well as the hydrolysis product adipic acid (AA) using stable isotope dilution quantification. Metabolites were excreted within 24 h after oral dose with one or two concentration maxima at 0.8-3.0 h (n = 3) and 4.8-6.3 h (n = 2). AA was the major but unspecific metabolite with urinary excretion fractions (FUEs) of 14-26 %. Mean FUEs (range) of 3cx-MnPrA, MnBA, 3OH-MnBA, and tentative 4OH-MnBA were low, but consistent between volunteers (0.47 % (0.35-0.63 %), 0.079 % (0.065-0.091 %), 0.012 % (0.006-0.016 %), and 0.005 % (0.002-0.009 %), respectively). MnBA and 3OH-MnBA seem to be suitable, specific exposure biomarkers for DnBA, whereas 3cx-MnPrA and 4OH-MnBA seem to originate also from other, unknown sources not related to DnBA. Compared to the oral study, metabolite excretion in the dermal study was delayed and MnBA excretion was somewhat higher compared to the oxidized metabolites. Based on urinary concentrations and the above excretion fractions, calculated uptakes in the dermal study did not exceed the adipate ester ADI of 5 mg/(kg bw*day).

In recent years, poly (butylene adipate-co-terephthalate) (PBAT) has been widely used. However, PBAT-degrading bacteria have rarely been reported. PBAT-degrading bacteria were isolated from farmland soil and identified. The effects of growth factors on the degradation of PBAT and the lipase activity of PBAT-degrading bacteria were assessed. The degradation mechanism was analyzed using scanning electron microscopy, attenuated total reflection Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, X-ray diffraction, and liquid chromatography-mass spectrometry. The results showed that Stenotrophomonas sp. YCJ1 had a significant degrading effect on PBAT. Under certain conditions, the strain could secrete 10.53 U/mL of lipase activity and degrade 10.14 wt.% of PBAT films. The strain secreted lipase to catalyze the degradation of the ester bonds in PBAT, resulting in the production of degradation products such as terephthalic acid, 1,4-butanediol, and adipic acid. Furthermore, the degradation products could participate in the metabolism of YCJ1 as carbon sources to facilitate complete degradation of PBAT, indicating that the strain has potential value for the bioremediation of PBAT in the environment.

Biodegradation tests of chitosan (CH), polybutylene adipate terephthalate (PBAT) and high density polyethylene (HDPE) polymers were carried out using the standard OECD 301D guidelines. The results showed that the CH samples biodegraded faster than those of PBAT. Photographs registered exhibited the complete or partial disintegration of the samples, and a more opaque color was observed with the increase of biodegradation. FTIR analysis showed some changes in the intensity of the typical bands of the HDPE sample. The presence of P. nitroreducens bacteria was revealed on the PBAT sample surface by SEM studies. Additionally, a clear increase in elastic modulus (EM) and tensile strength (TS) values were observed in PBAT and HDPE samples on day 3, which decreased significantly at the end of the study. Furthermore, an increase in the crystallinity of the HDPE sample was observed on day 28.

The synergistic effects of the combination of acetylated distarch adipate and sesbania gum (C-ADA-SG) with the ratio of 5:0, 4:1, 2.5:2.5, 1:4, 0:5, accounting for 5% (w/w) of the starch on gelatinization and retrogradation properties of wheat starch (WS) were studied. Scanning Electron Microscopy (SEM) showed that the microstructure of gelatinized WASs (WS added with C-ADA-SG) tended to be smoother. Based on the results of Rapid Visco-Analyzer (RVA) and Differential Scanning Calorimetry (DSC), the pasting characteristics of WS were affected and the gelatinization process was retarded by C-ADA-SG. After seven-day storage at 4 °C, compared to WS, the gel firmness, syneresis, retrogradation enthalpy, and the relative crystallinity of WASs clearly decreased by 17.47–44.36 g, 11.16–17.93%, 0.22–0.80 J·g−1, and 4.06–8.61%, respectively. However, the band ratio 1639:1157 cm−1 by FTIR and loss tangent (tan δ) value were increased with C-ADA-SG addition. Meanwhile, X-Ray Diffraction (XRD) reflected that native WS showed A-type crystal structure, which transferred to B + V type after retrogradation. Furthermore, Low-Field Nuclear Magnetic Resonance (LF-NMR) declared that C-ADA-SG increased the water mobility and limited the diffusion and seepage of water during storage. Generally, ADA and SG produced a synergistic effect on retarding the gelatinization and retrogradation of WS.

Background Prosthesis infection is a difficult-to-treat situation. Hydrogel is a novel biomaterial, which can be applied by simply spraying or by coating on implants before surgery and can be easily mixed with antibiotics. Methods In order to evaluate the potential use of antibiotic-loaded hydrogel, we incorporated vancomycin into oxidized hyaluronic acid (HA) and adipic acid dihydrazide and evaluated the drug release and antimicrobial activity against methicillin-resistant Staphylococcus aureus (ATCC 29213). Results The average release percentage of vancomycin on day 3 was about 86%. The antibiotic-loaded gel was biocompatible with mesenchymal stem cell, MC3T3, and L929 cell lines. The in vitro inhibition zones of vancomycin-loaded hydrogel [500X minimal inhibition concentration (MIC), 50X MIC, 10X MIC, and blank hydrogel] were 21, 13, 9, and 5 mm, respectively. In the Ti6Al4V implant biofilm model, 0.01–1% vancomycin-loaded gel exhibited significant anti-biofilm activity, measured by the MTT assay. Conclusions Vancomycin could be loaded onto oxidized HA and adipic acid dihydrazide, which exhibited excellent drug release and in vitro antimicrobial activity with minimal cell toxicity.

Pollution of water bodies with plasticizers is a serious environmental problem worldwide. In this study, we investigated the effects of plasticizers bis-(2-ethylhexyl) phthalate (DEHP) and bis-(2-ethylhexyl) adipate (DEHA) in Japanese medaka (Oryzias latipes). DEHP significantly increased the expression of all the genes tested: thyroid stimulating hormone beta subunit (tshβ-like), tshβ, deiodinase 1 (dio1), deiodinase 2 (dio2), and thyroid hormone receptor alpha (trα) and beta (trβ). However, DEHA only significantly increased tshβ at 7.4 µg/L but significantly decreased dio2 expression at 25.8, 111.1, and 412.6 4 µg/L, while other genes were not significantly affected. Both chemicals reduced eye size and total body length, but did not affect embryo development, hatching time and rate, and swimming performance. DEHA alone affected swim bladder inflation and not DEHP. This is the first report that not only DEHP but also DEHA disrupt thyroid hormone activity in fish. DEHP contamination (13.2 μg/L) was detected in tap water from Kobe, Japan; thus, tap water itself may disrupt thyroid hormone activity in Japanese medaka. Importantly, the effective concentration of DEHP for thyroid hormone-related gene expression and growth was close to or lower than DEHP concentrations reported in surface water elsewhere, indicating that DEHP contamination is a serious aquatic pollution.

The rapid reproduction of foodborne bacteria in food packaging threatens the health of consumers, the massive use and waste of packaging also causes serious environmental pollution. In this study, novel biodegradable antibacterial membranes based on silver-modified carboxymethyl chitosan (Ag-CMCS) were prepared. Polylactic acid (PLA) and polybutylene adipate-co-terephthalate (PBAT) were used as the base membrane materials. Characterization of the prepared membranes was performed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS), water contact angle, and so on. Especially, the silver on the surface of Ag-CMCS was proved to be metallic silver. For the first cycle of zone of inhibition test, the diameter of inhibition zone could reach up to 17 mm while the mass of silver released was negligible. The prepared antibacterial membranes could kill almost 100% of bacteria under certain conditions and inhibition zone still existed after more than 7 cycles of tests, indicating the prepared antibacterial membranes were effective. This study could provide new ideas for preparing efficient and environment-friendly antibacterial food packaging membranes.

Poly(glycerol adipate) (PGA) is a biodegradable, biocompatible, polymer with a great deal of potential in the field of drug delivery. Active drug molecules can be conjugated to the polymer backbone or encapsulated in self-assembled nanoparticles for targeted and systemic delivery. Here, a range of techniques have been used to characterise the enzymatic degradation of PGA extensively for the first time and to provide an indication of the way the polymer will behave and release drug payloads in vivo. Dynamic Light Scattering was used to monitor change in nanoparticle size, indicative of degradation. The release of a fluorescent dye, coupled to PGA, upon incubation with enzymes was measured over a 96 h period as a model of drug release from polymer drug conjugates. The changes to the chemical structure and molecular weight of PGA following enzyme exposure were characterised using FTIR, NMR and GPC. These techniques provided evidence of the biodegradability of PGA, its susceptibility to degradation by a range of enzymes commonly found in the human body and the polymer’s potential as a drug delivery platform.

Di(2-ethylhexyl) adipate (DEHA) is a plasticizer and phthalate substitute used in various consumer products. Relevant population exposures have to be assumed. In this study we describe the determination of three specific side chain-oxidized monoester metabolites of DEHA, mono-2-ethyl-5-hydroxyhexyl adipate (5OH-MEHA), mono-2-ethyl-5-oxohexyl adipate (5oxo-MEHA), and mono-5-carboxy-2-ethylpentyl adipate (5cx-MEPA) in human urine as potential biomarkers of DEHA exposure. After enzymatic hydrolysis, urine samples were analyzed by online turbulent flow chromatography for matrix depletion and analyte enrichment coupled to liquid chromatography-electrospray ionization-triple quadrupole-tandem mass spectrometry (online-SPE-LC-MS/MS). For quantification stable isotope dilution was applied with limits of quantification of 0.05 μg/L for 5cx-MEPA and 5OH-MEHA, and 0.1 μg/L for 5oxo-MEHA. Method accuracies (relative recoveries) were between 92 and 109%, and relative standard deviations5%. We investigated the applicability of the method for internal DEHA exposure assessment in six volunteers who had consumed food wrapped in commercial PVC-cling film containing DEHA and in two small pilot populations without known DEHA exposure (44 pregnant Brazilian women and 32 German adults). In the cling film experiment, we could quantify all three metabolites in all post exposure urine samples, with 5cx-MEPA being most prominent (0.30-10.2 μg/L), followed by 5OH-MEHA (0.12-4.31 μg/L) and 5oxo-MEHA (0.12-2.84 μg/L). In the Brazilian and German samples we could detect DEHA exposures in 43 and 9% of all samples, again with 5cx-MEPA as the most prominent metabolite. Based on validation and pilot biomonitoring results, the method has proven appropriate for DEHA biomonitoring and will be applied in future metabolism and population studies.

Di (2-ethylhexyl) adipate (DEHA) is a potential plasticizer alternative for di-2-ethylhexyl phthalate (DEHP). Toxicity of DEHA has been studied mostly via oral exposure but not assessed after repeated intravenous exposure. The present study shows the toxicity effects after intravenous administration for 28 consecutive days and the reversibility of the effects following a 14-day recovery period. The study was conducted under GLP conditions. Four groups of rats (15/sex/group) each received either vehicle or DEHA in vehicle (100, 200, or 450 mg/kg/day). Criteria for evaluation included clinical observations, body weight, food consumption, clinical pathology (hematology, serum chemistry, coagulation, urinalyses), gross (necropsy) evaluation, organ weight and histopathological evaluation. There were no DEHA-related changes in all the endpoints evaluated at 100 or 200 mg/kg/day. There were no test article-related changes in clinical pathology or gross necropsy observation at 450 mg/kg/day. At the high-dose, DEHA-related findings included clinical observations, decreased body weight gain and food consumption, increased liver weight in females associated with minimal hepatocellular hypertrophy, and decreased thymus weight in males and females without histopathology findings. All these findings were completely reversible within a 14-day recovery period. Therefore, the 200 mg/kg/day dose is considered to be the No-Observed-Effect Level (NOEL).

Adipate is a linear C6 dicarboxylic acid, and is a crucial commercial material mainly used to produce the polymer nylon-6,6. In this study, the pathway producing adipate via a reverse reaction of degradation pathway of adipic acid was ported from Thermobifida fusca to Escherichia coli (E. coli). The pathway contains 6 genes: Tfu_0875, Tfu_2399, Tfu_0067, Tfu_1647, Tfu_2576 and Tfu_2577, which encodes β-ketothiolase, 3-hydroxyacyl-CoA dehydrogenase, 3-hydroxyadipyl-CoA dehydrogenase, 5-carboxy-2-pentenoyl-CoA reductase and adipyl-CoA synthetase, respectively. Of the genes in this pathway, Tfu_1647 is the limited step. Here, we constructed a homology model of 5-carboxy-2-pentenoyl-CoA reductase and found that Lys295 and Glu334 were the active sites. We carried out ten site-directed mutations of these two residues including E334D, K295R, K295Q, K295Y, K295 F, E334R, E334H, E334 K, E334 W, and E334 F. The enzymatic activity of Tfu_1647 in pTrc99A-0067-1647 of E334D, E334 F, and E334R were much higher than that in the control. The Km values of E334D, E334 F, and E334R were significantly reduced compared with the control. The strain with E334D had the highest adipic acid titer (0.23 g/L) with 5.8% of the theoretical yield. The rational reconstruction of 5-carboxy-2-pentenoyl-CoA reductase is a potential approach in improving the enzymatic activity and titer of adipate.

Celecoxib (CEL) is a selective cyclooxygenase-2 (COX-2) inhibitor therapeutically indicated for the treatment of rheumatoid arthritis, osteoarthritis, acute pain, and inflammation. However, its poor solubility and dissolution rate significantly hinders its broader application. In this study, eutectic mixtures, as binary pharmaceutical compositions of CEL with adipic acid (ADI) and saccharin (SAC), were identified through a phase diagram and Tammann’s triangle intended to improve the wettability and dissolution rate of poorly water-soluble CEL. The contact angles at 0s in the liquid-solid interface were approximately θs (theta) 79.7 ± 0.50° and 86.65 ± 0.45° for CEL-ADI and CEL-SAC, respectively, which were much lower than the value obtained for CEL (92.05 ± 0.75° θ). Moreover, a comparison of the disk intrinsic dissolution rate and powder dissolution properties demonstrated that eutectic mixtures significantly increased the dissolution rate compared with CEL and physical mixtures. A general relationship was elucidated and indicated that the dissolution rate was increased as the contact angle decreased (correlation coefficient, r = 0.9966 ± 0.0031). Therefore, CEL-ADI and CEL-SAC eutectics may offer a novel formulation strategy to enhance the solubility and oral bioavailability of CEL.

GLS1 enzymes (Glutaminase C (GAC) and kidney-type Glutaminase (KGA)) are gaining prominence as a target for tumor treatment including lung, breast, kidney, prostate, and colorectal. To date, several medicinal chemistry studies are being conducted to develop new and effective inhibitors against GLS1 enzymes. Telaglenastat, a drug that targets the allosteric site of GLS1, has undergone clinical trials for the first time for the therapy of solid tumors and hematological malignancies. A comprehensive computational investigation is performed to get insights into the inhibition mechanism of the Telaglenastat. Some novel inhibitors are also proposed against GLS1 enzymes using the drug repurposing approach using 2D-fingerprinting virtual screening method against 2.4 million compounds, application of pharmacokinetics, Molecular Docking, and Molecular Dynamic (MD) Simulations. A TIP3P water box of 10 Å was defined to solvate both enzymes to improve MD simulation reliability. The dynamics results were validated further by the MMGB/PBSA binding free energy method, RDF, and AFD analysis. Results of these computational analysis revealed a stable binding affinity of Telaglenastat, as well as an FDA approved drug Astemizole (IC

Adipic acid is a platform chemical, and is the most important commercial dicarboxylic acid. It has been targeted for biochemical conversion as an alternative to present chemical production routes. From the perspective of bioeconomy, several kinds of raw material are of interest including the sugar platform (derived from starch, cellulose or hemicellulose), the lignin platform (aromatics) and the fatty acid platform (lipid derived). Two main biochemical-based production schemes may be employed: (i) direct fermentation to adipic acid, or (ii) fermentation to muconic or glucaric acid, followed by chemical hydrogenation (indirect fermentation). This review presents a comprehensive description of the metabolic pathways that could be constructed and analyzes their respective theoretical yields and metabolic constraints. The experimental yields and titers obtained so far are low, with the exception of processes based on palm oil and glycerol, which have been reported to yield up to 50 g and 68 g adipic acid/L, respectively. The challenges that remain to be addressed in order to achieve industrially relevant production levels include solving redox constraints, and identifying and/or engineering enzymes for parts of the metabolic pathways that have yet to be metabolically demonstrated. This review provides new insights into ways in which metabolic pathways can be constructed to achieve efficient adipic acid production. The production host provides the chassis to be engineered via an appropriate metabolic pathway, and should also have properties suitable for the industrial production of adipic acid. An acidic process pH is attractive to reduce the cost of downstream processing. The production host should exhibit high tolerance to complex raw material streams and high adipic acid concentrations at acidic pH.

To investigate the effect of acetylated distarch adipate (ADA) on the physicochemical properties and structure of shrimp myofibrillar protein (MP), the changes in chemical bonds, secondary structure and protein composition of shrimp MP and MP gel (MPG) were analyzed. Besides, the microstructure, water state, texture properties and water holding capacity (WHC) of MPG with different ADA additions were compared. The results showed that the shrimp MPG with 1% ADA addition had the highest breaking force and gel strength, WHC, and the densest three-dimensional network structure. The ADA had little significant effect on the secondary structure of MP and MPG. In addition, hydrogen and ionic bonds were the main chemical bonds of MP, while MPG is mainly dominated by hydrophobic and disulfide bonds. The correlation analysis of gel properties and water state of MPG showed that bound water and immobilized water had a positive effect on the gel strength.

In terms of risk assessment especially for known and unknown substances migrating from food contact materials, quantification without corresponding reference substances currently poses a challenge. In the present study, the opportunity of a universal response quantification approach was evaluated by using a corona charged aerosol detector (CAD) for liquid chromatography combined with inverse gradient compensation. Characteristics of CAD detection in dependence of substance properties were analyzed with 46 randomly chosen reference substances. An almost equal CAD response (±20%) was achieved for non-volatile substances with a molecular weight of minimum 400 g/mol and a vapor pressure of maximum 10−8 Torr. We empirically defined an analytical parameter, Q50/35, the quotient of CAD peak areas at CAD evaporator temperatures of 50 °C and 35 °C, to predict the adequacy of the CAD universal response approach for quantification of known and unknown analyte substances. Exemplarily, we applied the CAD universal quantification approach for the determination of extractable oligomers below 1000 g/mol from a variety of food contact polycondensate plastic materials (e.g. polyesters like polyethylene terephthalate, polybutylene terephthalate, Tritan copolyester, polyamides 6, 6.6 and 6 T/6I and polyarylsulfones polyphenylsulfone and polyethersulfone). Quantitative results for in total 44 oligomers out of 11 materials were compared with established material-specific quantification methods using extracted oligomer mixtures as well as individual oligomers isolated from the mixtures. CAD-based quantification results were generally in accordance to published quantification approaches for polyamide oligomers and oligomers from polyarylsulfones. For oligomers extracted and isolated from polyester materials a slight underestimation was determined by CAD universal response approach. In terms of detection limits and accuracy, the universal CAD approach exhibits no advantages compared to established UV-methods, to date.

Herein are reported unique properties of the novel human thiamin diphosphate (ThDP)-dependent enzyme 2-oxoadipate dehydrogenase (hE1a), known as dehydrogenase E1 and transketolase domain-containing protein 1 that is encoded by the DHTKD1 gene. It is involved in the oxidative decarboxylation of 2-oxoadipate (OA) to glutaryl-CoA on the final degradative pathway of L-lysine and is critical for mitochondrial metabolism. Functionally active recombinant hE1a has been produced according to both kinetic and spectroscopic criteria in our toolbox leading to the following conclusions: (i) The hE1a has recruited the dihydrolipoyl succinyltransferase (hE2o) and the dihydrolipoyl dehydrogenase (hE3) components of the tricarboxylic acid cycle 2-oxoglutarate dehydrogenase complex (OGDHc) for its activity. (ii) 2-Oxoglutarate (OG) and 2-oxoadipate (OA) could be oxidized by hE1a, however, hE1a displays an approximately 49-fold preference in catalytic efficiency for OA over OG, indicating that hE1a is specific to the 2-oxoadipate dehydrogenase complex. (iii) The hE1a forms the ThDP-enamine radical from OA according to electron paramagnetic resonance detection in the oxidative half reaction, and could produce superoxide and H2O2 from decarboxylation of OA in the forward physiological direction, as also seen with the 2-oxoglutarate dehydrogenase hE1o component. (iv) Once assembled to complex with the same hE2o and hE3 components, the hE1o and hE1a display strikingly different regulation: both succinyl-CoA and glutaryl-CoA significantly reduced the hE1o activity, but not the activity of hE1a.

Vanillin and vanillate are the major lignin-derived aromatic compounds produced through the alkaline oxidation of softwood lignin. Because the production of higher-value added chemicals from these compounds is essential for lignin valorization, the microbial production of β-ketoadipate, a promising raw material for the synthesis of novel nylons, from lignin was considered. Pseudomonas putida KT2440 was engineered to convert vanillin and vanillate to β-ketoadipate. By examining the culture conditions with an initial culture volume of 1 L, the engineered strain completely converted 25 g of vanillin and 25 g of vanillate and produced approximately 23 g of β-ketoadipate from each of them with a yield of 93% or higher. Furthermore, this strain showed the ability to efficiently produce β-ketoadipate from softwood lignin extracts in black liquor, a byproduct of pulp production. These results suggest that the production of β-ketoadipate from industrial black liquor is highly feasible for substantial lignin valorization.

This study aimed to develop bioactive guided bone regeneration (GBR) membranes by manufacturing PBAT/BAGNb composites as casting films. Composites were produced by melt-extrusion, and BAGNb was added at 10 wt%, 20 wt%, and 30 wt% concentration. Pure PBAT membranes were used as a control (0wt%BAGNb). FTIR and thermogravimetric analysis characterized the composites. Barrier membranes were produced by solvent casting, and their mechanical and surface properties were assessed by tensile strength test and contact angle analysis, respectively. The ion release and cell behavior were evaluated by pH, cell proliferation, and mineralization. Composites were successfully produced, and the chemical structure showed no interference of BAGNb in the PBAT structure. The addition of BAGNb increased the stiffness of the membranes and reduced the contact angle, increasing the roughness in one side of the membrane. Sustained pH increment was observed for BAGNb-containing membranes with increased proliferation and mineralization as the concentration of BAGNb increases. The incorporation of up to 30 wt% of BAGNb into PBAT barrier membranes was able to maintain adequate chemical-mechanical properties leading to the production of materials with tailored surface properties and bioactivity. Finally, this biomaterial class showed outstanding potential and may contribute to bone formation in GBR procedures.

Recently, we reported that the human 2-oxoglutarate dehydrogenase (hE1o) component of the 2-oxoglutarate dehydrogenase complex (OGDHc) could produce the reactive oxygen species superoxide and hydrogen peroxide (detected by chemical means) from its substrate 2-oxoglutarate (OG), most likely concurrently with one-electron oxidation by dioxygen of the thiamin diphosphate (ThDP)-derived enamine intermediate to a C2α-centered radical (detected by Electron Paramagnetic Resonance) [Nemeria et al., 2014 [17]; Ambrus et al. 2015 [18]]. We here report that hE1o can also utilize the next higher homologue of OG, 2-oxoadipate (OA) as a substrate according to multiple criteria in our toolbox: (i) Both E1o-specific and overall complex activities (NADH production) were detected using OA as a substrate; (ii) Two post-decarboxylation intermediates were formed by hE1o from OA, the ThDP-enamine and the C2α-hydroxyalkyl-ThDP, with nearly identical rates for OG and OA; (iii) Both OG and OA could reductively acylate lipoyl domain created from dihydrolipoyl succinyltransferase (E2o); (iv) Both OG and OA gave α-ketol carboligaton products with glyoxylate, but with opposite chirality; a finding that could be of utility in chiral synthesis; (v) Dioxygen could oxidize the ThDP-derived enamine from both OG and OA, leading to ThDP-enamine radical and generation of superoxide and H2O2. While the observed oxidation-reduction with dioxygen is only a side reaction of the predominant physiological product glutaryl-CoA, the efficiency of superoxide/ H2O2 production was 7-times larger from OA than from OG, making the reaction of OGDHc with OA one of the important superoxide/ H2O2 producers among 2-oxo acid dehydrogenase complexes in mitochondria.

To remedy the problems riddled in cancer chemotherapy, such as poor solubility, low selectivity, and insufficient intra-cellular release of drugs, novel heparin-based redox-sensitive polymeric nanoparticles were developed. The amphiphilic polymer, heparin-alpha-tocopherol succinate (Hep-cys-TOS) was synthesized by grafting hydrophobic TOS to heparin using cystamine as the redox-sensitive linker, which could self-assemble into nanoparticles in phosphate buffer saline (PBS) with low critical aggregation concentration (CAC) values ranging from 0.026 to 0.093mg/mL. Paclitaxel (PTX)-loaded Hep-cys-TOS nanoparticles were prepared via a dialysis method, exhibiting a high drug-loading efficiency of 18.99%. Physicochemical properties of the optimized formulation were characterized by dynamic light scattering (DLS), transmission electron microscope (TEM) and differential scanning calorimetry (DSC). Subsequently, the redox-sensitivity of Hep-cys-TOS nanoparticles was confirmed by the changes in size distribution, morphology and appearance after dithiothreitol (DTT) treatment. Besides, the in vitro release of PTX from Hep-cys-TOS nanoparticles also exhibited a redox-triggered profile. Also, the uptake behavior and pathways of coumarin 6-loaded Hep-cys-TOS nanoparticles were investigated, suggesting the nanoparticles could be taken into MCF-7 cells in energy-dependent, caveolae-mediated and cholesterol-dependent endocytosis manners. Later, MTT assays of different PTX-free and PTX-loaded formulations revealed the desirable safety of PTX-free nanoparticles and the enhanced anti-cancer activity of PTX-loaded Hep-cys-TOS nanoparticles (IC50=0.79μg/mL). Apoptosis study indicated the redox-sensitive formulation could induce more apoptosis of MCF-7 cells than insensitive one (55.2% vs. 41.7%), showing the importance of intracellular burst release of PTX. Subsequently, the hemolytic toxicity confirmed the safety of the nanoparticles for intravenous administration. The results indicated the developed redox-sensitive nanoparticles were promising as intracellular drug delivery vehicles for cancer treatment.

Adipic acid is the most industrially important dicarboxylic acid as it is a key monomer in the synthesis of nylon. Today, adipic acid is obtained via a chemical process that relies on petrochemical precursors and releases large quantities of greenhouse gases. In the last two years, significant progress has been made in engineering microbes for the production of adipic acid and its immediate precursors, muconic acid and glucaric acid. Not only have the microbial substrates expanded beyond glucose and glycerol to include lignin monomers and hemicellulose components, but the number of microbial chassis now goes further than Escherichia coli and Saccharomyces cerevisiae to include microbes proficient in aromatic degradation, cellulose secretion and degradation of multiple carbon sources. Here, we review the metabolic engineering and nascent protein engineering strategies undertaken in each of these chassis to convert different feedstocks to adipic, muconic and glucaric acid. We also highlight near term prospects and challenges for each of the metabolic routes discussed.

In this study, butyl-etherified waxy and high amylose starches were melt-processed with biodegradable poly[(butylene succinate)-co-adipate] (PBSA) to improve the long-term stability of the starch-based materials. Butyl-etherification was believed to improve the compatibility of starch with PBSA matrix. Scanning electron microscopy results demonstrated that highly branched amylopectin structures in butyl-etherified starch have better chemical interaction with the PBSA matrix compared to linear amylose structures. Thermogravimetric analysis revealed that the thermal stability of the blends decreased with increasing starch loading for all starch types with varying amylose content; however, the nature of the starch controlled the mechanical properties of the blends. Furthermore, the differential scanning calorimetric and polarised optical microscopic results demonstrated that the degree of crystallinity of PBSA decreased with increasing loading of amylopectin content in starch. Therefore, this work reveals the possibility of improving the inherent properties of starch by blending with PBSA through careful selection of the amylose content in starch.

NFAT5 as a transcription factor with an established role in osmotic stress response, has also been revealed to be active under numerous settings, including pathological conditions such as diabetic microvascular complications, chronic arthritis and cancer. Despite these links, current strategies for downregulating NFAT5 activity only relies on indirect modulators, not directly targeting NFAT5, itself. With this study, through using a computational approach, an original peptide was explored to directly target C terminal dimerization of NFAT5 RHR, located in its DNA binding domain. At first, homodimeric NFAT5 RHR bound to its consensus DNA was used for prediction of a preliminary peptide sequence. Possible amino acid replacements for this preliminary peptide were predicted for optimization, which was followed by addition of a cell penetrating peptide sequence. These attempts yielded a small peptide library, which was further investigated for peptide affinities towards C terminal of NFAT5 RHR through molecular docking, 50 ns and 250 ns molecular dynamics simulations, followed by estimation of MM-PBSA based relative binding free energies. Results indicated that after receiving mutations on the preliminary peptide sequence for optimization, a unique peptide could target C terminal dimerization region of NFAT5 RHR through using its cell penetrating peptide sequence. In conclusion, this is the first study presenting computational evidence on identification of a novel peptide capable of directly targeting NFAT5 dimerization. Besides, future implications of these observations were also discussed in terms of methodology and possible applications.

A cocultivation of the Pseudomonas mendocina with Actinomucor elegans was developed and investigated to improve the biodegradation of polylactic acid/polybutylene adipate-co-terephthalate (PLA/PBAT). And the coculture system could produce an efficient PLA/PBAT-degrading enzymes system to degrade PLA/PBAT films. The results showed that the protease activity (11.50 U/mL) and lipase activity (40.46 U/mL) of the coculture exceeded that of the monoculture (P. mendocina of 7.31 U/mL, A. elegans of 32.47 U/mL). The degradation rate of PLA/PBAT films using the coculture system was 18.95 wt% within 5 days, which was considerably higher than that of P. mendocina (12.94 wt%) and A. elegans (9.27 wt%) individually, suggesting that P. mendocina and A. elegans had synergistic degradation. In addition, P. mendocina and A. elegans could secrete proteases and lipases, respectively, which could catalyze the ester bonds of PLA1 and PBAT in PLA/PBAT films, respectively, and hydrolyze them into different monomers and oligomers as nutrition sources. Therefore, the PLA/PBAT films could be completely degraded. In this study, the PLA/PBAT films were efficiently degraded in the coculture system for the first time, which significantly improved the biodegradation of PLA/PBAT films.

Di(2-ethylhexyl) adipate (DEHA) is a widely used plasticizer and prevalent environmental contaminant. In this study, DEHA concentrations in the milk, cheese, and butter samples wrapped with food-grade commercial polyethylene films and stored at 4 °C for 30 days were detected using gas chromatographic analysis. Also, the effects of exposure to a high dose of DEHA for a long duration on the liver, brain, and heart of Wistar rats were assessed. Besides, the possible beneficial effect of Peganum harmala oil (PGO), in relieving DEHA induced adverse effects was explored. For this purpose, four groups (8 rats/group) were orally given physiological saline, PGO (320 mg/kg bwt), DEHA (2000 mg/kg bwt), or PGO + DEHA for 60 days. The results revealed that the DEHA concentrations in the tested dairy products were ordered as follows: (butter > cheese > milk). Notably, the detected levels in butter were higher than the specific migration limit in foods. DEHA induced a significant increase in the serum levels of glucose, alanine transaminase, aspartate transaminase, acetylcholine esterase, creatine kinase–myocardium bound, malondialdehyde, tumor necrosis factor-α, and interleukin-1β. But, significant hypoproteinemia, hypoalbuminemia, hypoglobulinemia, and hypocholesterolemia were evident following DEHA exposure. A significant reduction in the serum level of superoxide dismutase, reduced glutathione, and brain-derived neurotrophic factor was recorded. Besides, a significant downregulation in hepatic CYP2E1, brain glial fibrillary acidic protein, and cardiac troponin I gene expression was noticed. Moreover, DEHA exposure induced a significant decrease in Bcl-2 immunolabeling, but Caspase-3 immunoexpression was increased. On the contrary, PGO significantly recused DEHA injurious impacts. Therefore, PGO could represent a promising agent for preventing DEHA-induced hepatotoxicity, neurotoxicity, and cardiotoxicity.

In this work, the effects of PcaJ (beta-ketoadipate:succinyl-coenzyme A transferase)- and PcaD (beta-ketoadipate enol-lactone hydrolase)-inactivation on protocatechuic acid metabolism in Pseudomonas putida KT2440 were evaluated. Beta-ketoadipic acid was produced from protocatechuic acid by the inactivation of PcaJ as expected; however, a portion of the produced beta-ketoadipic acid was converted to levulinic acid through a purification step consisting of extraction from the culture and recrystallization. On the other hand, muconolactone was purified from the culture of the PcaD-inactivated mutant of KT2440, although beta-ketoadipate enol-lactone was supposed to be produced because it is the substrate of PcaD. Under aerobic conditions, it has been reported that lignin-related aromatics are metabolized through PCA 2,3- or 3,4- or 4,5-ring cleavage pathways, and muconolactone is an intermediate observed in the metabolism of catechol, not protocatechuic acid. Our results will provide a prospective route to produce muconolactone with a high yield through the protocatechuate-3,4-metabolic pathway.

The aim of this study was to determine the effect of diethylhexylphthalate (DEHP) on testicular mitochondrial viability and lipid peroxidation as a possible novel mechanism of PEHP testicular toxicity and whether grape seed extract (GSE) beneficially influences the mitochondrial function in testes of rats exposed to diethylhexylphthalate (DEHP). Sixty male albino rats were divided into three groups (n = 20): group I: was used as a control, group II: received diethylhexylphthalate (DEHP) (500 mg/kg/day orally) alone for 30 days, and group III: received the same DEHP dose in combination with GSE (proanthocyanidins) (100 mg/kg body weight). DEHP administration significantly decreases the testicular mitochondrial viability, mRNA expression of androgen receptors (AR), testosterone hormone concentration, increases mRNA expression of INOS and as compared to control group. It also decreases reduced glutathione (GSH) concentration, glutathione reductase (GR), super oxide dismutase (SOD), Catalase activities and increases lipid peroxidation (LPO) and DNA fragmentation%. In synchronization, a substantial decrease of testicular & epididymal weight and volume which accompanied by considerable alteration of semen character. Grape seed extract (GSE) alleviates the toxic effects of DEHP by increasing the mitochondrial viability, decreases the lipid peroxidation, and increases the testicular antioxidant activity. Our results were confirmed by histopathological and immunhistochemical studies.

In humans, mutations in dehydrogenase E1 and transketolase domain containing 1 (DHTKD1) are associated with neurological abnormalities and accumulation of 2-oxoadipate, 2-aminoadipate, and reactive oxygen species. The protein encoded by DHTKD1 has sequence and structural similarities to 2-oxoglutarate dehydrogenase, and the 2-oxoglutarate dehydrogenase complex can produce superoxide/H2O2 at high rates. The DHTKD1 enzyme is hypothesized to catalyze the oxidative decarboxylation of 2-oxoadipate, a shared intermediate of the degradative pathways for tryptophan, lysine and hydroxylysine. Here, we show that rat skeletal muscle mitochondria can produce superoxide/H2O2 at high rates when given 2-oxoadipate. We identify the putative mitochondrial 2-oxoadipate dehydrogenase complex as one of the sources and characterize the conditions that favor its superoxide/H2O2 production. Rates increased at higher NAD(P)H/NAD(P)(+) ratios and were higher at each NAD(P)H/NAD(P)(+) ratio when 2-oxoadipate was present, showing that superoxide/H2O2 was produced during the forward reaction from 2-oxoadipate, but not in the reverse reaction from NADH in the absence of 2-oxoadipate. The maximum capacity of the 2-oxoadipate dehydrogenase complex for production of superoxide/H2O2 is comparable to that of site IF of complex I, and seven, four and almost two-fold lower than the capacities of the 2-oxoglutarate, pyruvate and branched-chain 2-oxoacid dehydrogenase complexes, respectively. Regulation by ADP and ATP of H2O2 production driven by 2-oxoadipate was very different from that driven by 2-oxoglutarate, suggesting that site AF of the 2-oxoadipate dehydrogenase complex is a new source of superoxide/H2O2 associated with the NADH isopotential pool in mitochondria.

Made available in DSpace on 2020-12-12T01:24:11Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-10-01 Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Biodegradable mulch films are an alternative to polyethylene films used in agriculture for weed control, improving crop productivity. This change could minimize the residue production and costs related to the final disposal. Nevertheless, the environmental safety of these biodegradable products is scarcely investigated. In this work, samples of poly(butylene adipate-co-terephthalate)-PBAT mulch films, with and without UV stabilizer additives, were prepared. Aqueous extracts of soil samples, where mulch films were disposed, were investigated using bioassays with Lactuca sativa, Allium cepa, and cell culture HepG2/C3A. As PBAT is expected to suffer photodegradation and biodegradation, soil samples mixed with films before and after these processes were evaluated. Soil aqueous extracts promoted root grown (mainly hypocotyl) of L. sativa, probably due to presence of nutrients. So, to evaluate toxicity potential, in this case it was necessary to use aqueous extract prepared with soil instead of ultrapure water as the control. After doing this analysis it was observed that no adverse impacts due to PBAT films occurred. No chromosomal abnormalities were observed in A. cepa bioassay for any of tested samples. The absence of genotoxic potential was confirmed by comet assay and micronucleus test using human hepatocarcinoma cell line HepG2/C3A. These results showed that the soil did not induce damage to the tested organisms, before and after degradation of PBAT films. Department of Materials Engineering and Bioprocess School of Chemical Engineering State University of Campinas (UNICAMP) Department of Biology Institute of Biosciences São Paulo State University (UNESP) Department of Biology Institute of Biosciences São Paulo State University (UNESP) FAPESP: 2016/10777-0 FAPESP: 2016/11999-0)

International audience; Continuous venovenous hemofiltration (CVVH) is widely used in intensive care units to treat patients with acute kidney injury requiring renal replacement therapy. The medical devices (MD) used for CVVH include a hemofilter and tubings made of plasticized PVC. Due to its known reprotoxicity, diethylhexyl phthalate (DEHP) has been replaced by alternatives such as diethylhexyladipate (DEHA) in some of these tubings. The migration of DEHA from hemofiltration systems has not been assessed and thus the level of patient exposure to this DEHP-alternative remains unknown.In this study, 2 CVVH models were used to evaluate the potential migration of DEHA from PVC tubings, allowing the determination of (Rachoin and Weisberg, 2019) the highest rates of DEHA able to migrate into a simulant flowing in a marketed adult CVVH circuit by disregarding any metabolisation and (Krieter et al., 2013) the clinical-reflecting exposure of patients to this plasticizer and its metabolites by assessing their migration into blood.In the first model, we showed that patients undergoing a CVVH procedure may be exposed to high rates of DEHA. Moreover, DEHA is continuously hydrolyzed into its primary metabolite MEHA (monoethylhexyladipate), which may reach cytotoxic level in the patients’ blood.When looking from a « safer » MD perspective, DEHA might not be the best alternative plasticizer for CVVH tubings. However, to reflect clinical conditions, this study should be completed by an in-vivo evaluation (biomonitoring) of the oxidized metabolites of DEHA in urines of inpatients undergoing CVVH.

The idea of increasing the performance of sunscreens without adding more UV-filters is very attractive. Early studies reported an influence of solvents on the absorbing properties of UV-absorbers which was shown to be connected to the solvent polarity. However, the polarity differed a lot between tested solvents and most were unsuitable UV-filter solubilizers. The aim of the present study was to focus exclusively on emollients pertinent for sunscreens and investigate their impact on the performance of UV-filter combinations. The UV absorbance of Bis-ethylhexyloxyphenol Methoxyphenyl Triazine, Ethylhexyl Triazone, Diethylamino Hydroxybenzoyl Hexyl Benzoate, and Ethylhexyl Methoxycinnamate was measured in suncare relevant emollients comprising C12–15 Alkyl Benzoate, Dibutyl Adipate, Caprylic/Capric Triglyceride, Coco-caprylate, Isopropyl Myristate, Dicaprylyl Carbonate. The wavelength of maximum absorbance (λmax) and specific extinction at λmax (E1,1 (λmax)) were assessed for each UV-filter – emollient system. The performance of market relevant UV-filter combinations based on the studied UV-filters was simulated for each emollient with a computational method using the absorbance values measured for each UV-filter - emollient system. The difference in polarity of emollients led to a 2-3 nm bathochromic shift and a variation of the E1,1 (λmax) ranging from 4 to 20% for tested UV-filters. The emollient type showed nearly no influence on the sun protection factor (SPF) of market relevant UV-filter combinations probably due to a different influence an emollient shows on the UVB filters resulting in cancelling of the corresponding effect. Conversely, for all UV-filter combinations the UVA protection decreased with a decrease in the emollient polarity. Whilst the SPF was not impacted by standardly used cosmetic oils, the results advocate to use polar emollients to optimize the UVA protection. This is of advantage since polar emollients better dissolve crystalline UV-filters. From tested emollients, Dibutyl Adipate performed the best for both SPF and PPD factors.

Octacalcium phosphate (OCP; Ca8(HPO4)2(PO4)4. 5H2O) is a plausible precursor phase of biological hydroxyapatite, which composites with a number of biologically relevant organic metabolites. Widely used material science physicochemical structure determination techniques successfully characterize the mineral component of these composites but leave details of the structure, and interactions with mineral, of the organic component almost completely obscure. The metabolic linear di-acids succinate (SUC) and adipate (ADI) differentially expand the hydrated (100) layer of OCP. 13C13C correlation (proton driven spin diffusion, PDSD) experiments on OCP composited with (U-13C4)-SUC, and (U13C6)-ADI, show that the two di-acids per unit cell adopt non-centrosymmetric but mutually identical structures. 13C{31P}, rotational echo double resonance (REDOR) shows that one end of each linear di-acid is displaced further from the surface of the apatitic OCP layer relative to the other end. Overall the results indicate two di-acids per unit cell disposed perpendicularly across the OCP hydrated layer with one carboxylate of each di-acid substituting a hydrated surface OCP phosphate group. This study re-affirms the unique advantages of ssNMR in elucidating structural details of organic-inorganic biocomposites, and thereby mechanisms underlying the roles of small metabolites in influencing biomineralization mechanisms and outcomes.

Diisononyl adipate is a plasticizer which has excellent property of low temperature resistance and is permitted in food contact materials. In this study, diisononyl adipate was synthesized from adipic acid and isononyl alcohol in a solvent-free system via immobilized lipase-catalyzed esterification. Liquid Eversa lipase from Thermomyces lanuginosus was immobilized on Lewatit VP OC 1600 carrier. The effects of temperature, substrate molar ratio, water activity of enzyme, vacuum, and enzyme loading on the reaction efficiency were investigated. Application of vacuum played a key role to achieve a 100% conversion. The optimal temperature, molar ratio (adipic acid to isononyl alcohol), water activity of enzyme, vacuum were 50 °C, 1:3, 0.75, 13.3 kPa, and 10% (based on weight of total substrate). Under these conditions, 100% conversion was achieved within 6 h.

Composites based on poly(butylene succinate-co-butylene adipate) (PBSA) containing amorphized and crystalline cellulose reinforcements have been prepared and characterized. In order to improve the polymer/filler interfacial adhesion, an efficient compatibilizing agent has been synthesized by chemical modification of PBSA and characterized by FT-IR, FT-NIR and 1H NMR spectroscopy. Uncompatibilized and compatibilized composites have been tested through morphological, mechanical, calorimetric and thermogravimetric analysis. Moreover, water vapor permeability and biodegradation kinetics of composites have been investigated. The addition to PBSA of cellulose fillers differing from each other by crystallinity degree and morphology, and the use of a compatibilizing agent have allowed modulating tensile and thermal properties, water vapor transmission rate and biodegradation kinetic of the composites.

Phase separation in plasticized cellulose triacetate (CTA) films is investigated to produce a microporous film that can be used in optical devices. Hot-stretched CTA films containing diisodecyl adipate (DIDA) show negative orientation birefringence similar to the hot-stretched pure CTA. After extracting DIDA from the stretched films by immersion into an organic solvent, however, the films exhibit positive birefringence. Moreover, the magnitude of the birefringence increases with the wavelength, known as extraordinary dispersion, which is an essential property in the preparation of an ideal quarter-wave plate. Numerous ellipsoidal pores with micro-scale were detected in the film after the immersion, indicating that DIDA were segregated and formed ellipsoidal domains in the CTA matrix during annealing and stretching. These results indicate that extraordinary wavelength dispersion is given by the combinations of orientation birefringence from CTA and form birefringence from micropores. Furthermore, it was found that annealing time and stretching condition affect the phase separation as well as the shape and size of pores.

It is commonly accepted that psychological stress contributes to the development of temporomandibular joint disorders, in which chronic orofacial pain is the main symptom. However, the central mechanism underlying the development of these disorders has remained unclear. The current study was performed to determine the involvement of the glia in the trigeminal spinal subnucleus caudalis in stress-induced increases in masseter muscle hyperalgesia in rats. After being subjected to chronic restraint stress, the animals showed decreased body weight gain, behavioral changes and marked masseter allodynia. We also found that astrocytes, but not microglia, in the trigeminal subnucleus caudalis (Vc) were dramatically activated. A further analysis was undertaken to investigate the contribution of the glia; we intrathecally injected l-α-aminoadipate (astrocyte-specific inhibitor) and/or minocycline (microglia-specific inhibitor) into the stressed rats. Our results showed that l-α-aminoadipate (LAA), but not minocycline, could significantly attenuate the mechanical masseter allodynia and behavioral changes induced by restraint stress. In addition, the expression of interleukin-1β (IL-1β) and phosphorylated N-methyl-d-aspartic acid receptor 1 (p-NR1) in the Vc was significantly increased after chronic restraint stress, whereas LAA dramatically inhibited the overexpression of IL-1β and p-NR1. Taken together, these results suggest that activated astrocytes in the Vc may be one of the most important factors in the pathophysiology of masseter hyperalgesia induced by restraint stress and the following overexpression of IL-1β and excessive NMDAR phosphorylation may ultimately contribute to masseter hyperalgesia. Thus, inhibiting spinal astrocytic activation may represent a novel therapeutic strategy for the treatment of orofacial pain induced by stress.

Aspergilli play major roles in the natural turnover of elements, especially through the decomposition of plant litter, but the end catabolism of lignin aromatic hydrocarbons remains largely unresolved. The 3-oxoadipate pathway of their degradation combines the catechol and the protocatechuate branches, each using a set of specific genes. However, annotation for most of these genes is lacking or attributed to poorly- or un-characterised families. Aspergillus nidulans can utilise as sole carbon/energy source either benzoate or salicylate (upstream aromatic metabolites of the protocatechuate and the catechol branches, respectively). Using this cultivation strategy and combined analyses of comparative proteomics, gene mining, gene expression and characterisation of particular gene-replacement mutants, we precisely assigned most of the steps of the 3-oxoadipate pathway to specific genes in this fungus. Our findings disclose the genetically encoded potential of saprophytic Ascomycota fungi to utilise this pathway and provide means to untie associated regulatory networks, which are vital to heightening their ecological significance.

Pharmaceutical applications which require knowledge of the solubility of a crystalline compound in an amorphous matrix are abundant in the literature. Several methods that allow the determination of such data have been reported, but so far have only been applicable to amorphous polymers above the glass transition of the resulting composites. The current work presents, for the first time, a reliable method for the determination of the solubility of crystalline pharmaceutical compounds in high and low molecular weight amorphous matrices at the glass transition and at room temperature (i.e. below the glass transition temperature), respectively. The solubilities of mannitol and indomethacin in polyvinyl pyrrolidone (PVP) K15 and PVP K25, respectively were measured at different temperatures. Mixtures of undissolved crystalline solute and saturated amorphous phase were obtained by annealing at a given temperature. The solubility at this temperature was then obtained by measuring the melting enthalpy of the crystalline phase, plotting it as a function of composition and extrapolating to zero enthalpy. This new method yielded results in accordance with the predictions reported in the literature. The method was also adapted for the measurement of the solubility of crystalline low molecular weight excipients in amorphous active pharmaceutical ingredients (APIs). The solubility of mannitol, glutaric acid and adipic acid in both indomethacin and sulfadimidine was experimentally determined and successfully compared with the difference between their respective calculated Hildebrand solubility parameters. As expected from the calculations, the dicarboxylic acids exhibited a high solubility in both amorphous indomethacin and sulfadimidine, whereas mannitol was almost insoluble in the same amorphous phases at room temperature. This work constitutes the first report of the methodology for determining an experimentally measured solubility for a low molecular weight crystalline solute in a low molecular weight amorphous matrix.

In order to improve the properties of collagen gel, N-hydroxysuccinimide activated adipic acid derivative (NHS-AA) was introduced into the formation of collagen fibrils. NHS-AA with different [NHS-AA]/[NH 2 ] ratios (0.1–1.5, calculated by [ester group] of NHS-AA and [NH 2 ] of lysine and hydroxylysine residues of collagen) was added after, simultaneously with or before the formation of collagen fibrils (abbreviated CAF, CSF and CBF, respectively) to obtain different collagen gels. With the same dose of NHS-AA, the cross-linking degree for CAF was lower than those for CSF and CBF. The formation of collagen fibrils was restrained by NHS-AA for CSF and CBF while that for CAF was unaffected. When the dose of NHS-AA increased from 0.1 to 1.5, the water contents of CSF and CBF increased while that of CAF had no obvious change. With lower dose of NHS-AA (0.1), CAF possessed higher value of G ′ (87.3 Pa) and the best thermal stability (47.6 °C). As the ratio of [NHS-AA]/[NH 2 ] increased to 1.5, CSF had the maximum value of G ′ (288.8 Pa) and CAF had the best thermal stability (52.9 °C). These results showed collagen gels with different properties could be prepared by adding NHS-AA with different adding sequence and dose.

A single crystal of adipic acid dihydrazide, ADH, has been analyzed. Its reaction with Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Hg(2+), Ag(+), Pd(2+) and/or Pt(2+) gave homometallic and heterometallic complexes which are characterized by partial elemental analysis, spectra (MS, ESR, (1)H NMR, electronic; IR), thermal analysis and magnetic measurements. Some complexes: Zn(0.73)Cu(ADH)Cl4·H2O; Zn(0.71)Hg(0.36)(ADH)Cl4·H2O; Zn(0.65)Cd(0.46)(ADH)Cl4·½H2O; Zn(0.75)Co(0.41)(ADH-2H)Cl2·3H2O; Cd0.85Co0.43(ADH)Cl4·½EtOH were isolated having nonstiochiometric metal ratios. The ligand behaves as a neutral (bidentate or tetradentate) and/or binegative tetradentate. A square-pyramid, square-planar and tetrahedral structures were proposed for the homo Co(II), Cu(II) and Ni(II) complexes, respectively. A similar and different stereochemistry around each metal ion (tetrahedral+tetrahedral; tetrahedral+square-planar; tetrahedral+tetrahedral and/or tetrahedral+octahedral) was suggested for the heterometallic complexes. Some complexes were found highly stable with stability point240 °C; the most stable is [HgNi(ADH-2H)Cl2]. The presence of diamagnetic atom (Zn, Cd or Hg) reduces the magnetic moments and gave anomalous moments. The degradation steps and the hydrated complexes are confirmed through the TGA study. The order of covalency of [Zn(0.73)Cu(ADH)Cl4]·H2O, [CdCu(ADH)Cl4]·H2O and [HgCu(ADH-2H)Cl2] matches with the size of the second metal (Zn complexCd complexHg complex). Some heterometallic complexes were found nonstoichiometric through the analysis of their metal content and supported by TGA.

The structure, dynamic behavior and binding affinity of the inclusion complexes between naringenin and the two cyclodextrins (CDs), β-CD and its 2,6-dimethyl derivative (DM-β-CD), were theoretically studied by multiple molecular dynamics simulations and free energy calculations. Naringenin most likely prefers to bind with CDs through the phenyl ring. Although a lower hydrogen bond formation of naringenin with the 3-hydroxyl group of DM-β-CD (relative to β-CD) was observed, the higher cavity could encapsulate almost the whole naringenin molecule. In contrast for the naringenin/β-CD complex, the phenyl ring feasibly passed through the primary rim resulting in the chromone ring binding inside instead. MM-PBSA/GBSA and QM-PBSA/GBSA binding free energies strongly suggested a greater stability of the naringenin/DM-β-CD inclusion complex. Van der Waals force played an important role as the key guest–host interaction for the complexation between naringenin and each cyclodextrin.

An organic single crystal of Urea Adipic acid (UAA) was successfully grown in methanol solvent by slow solvent evaporation technique at room temperature (30 °C). The structure of grown crystal was elucidated from the X-ray diffraction study and it belongs to monoclinic system with centrosymmetric space group P21/c. The optical transmission spectrum of UAA has been recorded and its theoretical calculations were carried out to determine the linear optical constants such as linear absorption coefficient, extinction coefficient, refractive index and reflectance etc. The third-order nonlinearities of UAA crystal have been investigated by Z-scan method. The values of nonlinear refractive index (n2), the absorption coefficient (β) and third-order nonlinear susceptibility (χ((3))) are found to be the order of 0.96×10(-10) cm(2)/W, 1.248×10(-4) cm/W and 6.44×10(-8) esu respectively. Fourier Transform Infra Red and Raman spectroscopy studies reveal the intermolecular interactions present in the UAA sample. The dielectric and mechanical measurements of the title compound are also reported.

Double-alkylated glutamic acid and aminoadipic acid derived gel systems (G1 and G2) have been prepared and then grafted onto silica particles. Gel-forming compounds-grafted silica particles (Sil-G1 and Sil-G2) were then applied for the liquid chromatographic separation of shape-constrained isomers of polycyclic aromatic hydrocarbons (PAHs) and tocopherols as stationary phases. G1 and G2 were analyzed before and after immobilization onto silica. Elemental analysis and thermogravimentric analysis (TGA) results showed almost the same amounts of organic phases were grafted in Sil-G1 and Sil-G2 phases. However, chromatographic results showed large differences of molecular-shape selectivity between the stationary phases. Little change in the chemical structures of the gel-forming compounds can change the molecular orientation as well as drastic change in molecular recognition in liquid chromatography. Molecular orientation of the functional groups affected the interaction mechanism for the separation of shape-constrained isomers. Comparison of the shape selectivity of Sil-G1 and Sil-G2 phases with other commercial columns is also described.

Native potato starch (NS) and retrograded starch (R - obtained via freezing and defrosting of a starch paste) were used to prepare starch acetates: NS-A and R-A, and then acetylated distarch adipates: NS-ADA and R-ADA. The chemically-modified preparations produced from retrograded starch (R-A; R-ADA) were characterized by a higher degree of esterification compared to the modified preparations produced under the same conditions from native potato starch (NS-A; NS-ADA). Starch resistance to amylolysis was observed to increase (to 30-40 g/100 g) as a result of starch retrogradation and acetylation. Starch cross-linking had a significant impact on the increased viscosity of the paste in the entire course of pasting characteristics and on the increased values of rheological coefficients determined from the equations describing flow curves. The produced preparation of acetylated retrograded starch cross-linked with adipic acid (R-ADA) may be deemed an RS3/4 preparation to be used as a food thickening agent.

Promising treatment approaches in repairing tissue defects include implementation of regenerative medicine strategies, particularly delivery of preadipocytes to sites where adipose tissue damage needs to be repaired or where fat needs to be generated. In this study, we suggest that the injectable hyaluronic acid/adipic acid dihydrazide (HA/ADH) hydrogel may be an adipose-tissue-like material in terms of biological compatibility as well as mechanical behavior. First, we show that the hydrogel enables and supports growth, proliferation and differentiation of 3T3-L1 preadipocytes. Second, given that adipose tissue is a weight-bearing biological structure, we investigate the large deformation mechanical behavior of the hydrogel with and without embedded preadipocytes, by performing confined and unconfined compression tests and then calibrating a strain energy density (SED) function to the results. Four test groups were examined: (1) Hydrogel specimens right after the preparation without cells, (2) and (3) 3-days-cultured hydrogel specimens with and without cells, respectively, and (4) 6-days-cultured hydrogel specimens with cells. A one-term Ogden SED was found to adequately describe the hyperelastic behavior of the hydrogel specimens in all experimental groups. Importantly, we found that the mechanical properties of the hydrogel, when subjected to compression, are in good agreement with those of native adipose tissue, with the better fit occurring 3-6 days after preparation of the hydrogel. Third, computational finite element studies of the mechanical (stress-strain) behavior of the HA/ADH hydrogel when containing mature adipocytes indicated that the stiffnesses of the constructs were mildly affected by the presence of the adipocytes. Hence, we conclude that injectable HA/ADH hydrogel may serve as a vessel for protecting preadipocytes during, and at a short-term after delivery to native tissues, e.g. in research towards regenerative medicine in tissue reconstructions.

Adipic acid is the most important commercial aliphatic dicarboxylic acid in the chemical industry and is primarily used for the production of nylon-6,6 polyamide. The current adipic acid market volume is about 2.6 million tons/y and the average annual demand growth rate forecast to stay at 3-3.5% worldwide. Hitherto, the industrial production of adipic acid is carried out by petroleum-based chemo-catalytic processes from non-renewable fossil fuels. However, in the past years, efforts were made to find alternative routes for adipic acid production from renewable carbon sources by biotechnological processes. Here we review the approaches and the progress made toward bio-based production of adipic acid.