Search

The plasma control system (PCS) of QUEST is developed according to the progress of QUEST project. Since one of the critical goals of the project is to achieve the steady-state operation with high temperature vacuum vessel wall, the PCS is also required to have the capability to control the plasma for a long period. For the increase of the loads to processing power of the PCS, the PCS is decentralized with the use of reflective memories (RFMs). The PCS controls the plasma edge position with the real-time identification of plasma current and its position. This identification is done with not only flux loops but also hall sensors. The gas fueling method by piezo valve with monitoring the Hα signal filtered by a digital low-pass filter are proposed and suitable for the steady-state operation on QUEST. The present status and prospect of the PCS are presented with recent topics.

In the present RF-driven divertor plasma of QUEST, it has been observed that orbit-driven current flows in the open magnetic surfaces outside of the closed magnetic surfaces. To observe this phenomenon and the characteristics of the orbit-driven current, current density profiles have been calculated on two different equilibrium conditions. We calculated current density profiles from particle guiding center orbits both for the fundamental and the second harmonic resonances for the 8.2 GHz electron cyclotron current drive. From this calculation, hollow current density profiles have been obtained with significant characteristics on both conditions. Only positive current distribution has been observed in the open magnetic surfaces outside of the closed magnetic surfaces.

Global particle balance in non-inductive long-duration plasma on QUEST has been investigated. Approximately 70% of the fuel hydrogen (H) was retained in the wall and then was almost exhausted just after the discharge. The global recycling ratio (Rg), defined as the ratio of the evacuated H2 flux to that injected, was found to gradually increase during discharges and subsequently rose rapidly. To study the growth of Rg, the thermal desorption spectra after deuterium implantation in a specimen exposed to QUEST plasma was analyzed with a model which includes reflection, diffusion, solution, recombination, trapping, and plasma-induced desorption in the re-deposition layer. The model reconstructs the growth of Rg during a long-duration plasma and indicates solution plays a dominant role in the growth.

A plasma control system to sustain divertor configurations is developed on QUEST (Q-shu university experiment with steady-state spherical tokamak). Magnetic fluxes are numerically integrated at 100 kHz using FPGA (Field-Programmable Gate Array) modules and transferred to a main calculation loop at 4 kHz. With these signals, plasma shapes are identified in real time at 2 kHz under the assumption that the plasma current can be represented as one filament current. This calculation is done in another calculation loop in parallel by taking advantage of a multi-core processor of the plasma control system. The inside and outside plasma edge positions are controlled to their target positions using PID (proportional-integral-derivative) control loops. Whereas the outside edge position can not be controlled by the outer PF coil current, the inside edge position can be controlled by the inner PF coil current.

Particle retention and recycling in plasma fusion devices are generally associated with the diffusion of atomic hydrogen into the materials. The resulted permeation of atomic hydrogen is known as plasma driven permeation (PDP). This permeation may also be significant, even in the walls, which are not directly exposed to the plasma. Under similar conditions, the permeation flux (Γperm) of hydrogen through a 30 μm thick Ni membrane heated at 412–575 K has been measured in the spherical tokamak QUEST. Γperm is being measured during the scans of different operating parameters like RF power (PRF), chamber pressure (Pchamber), discharge widths (τdis) and vertical magnetic field (BZ). Simultaneously edge plasma density and spectral intensities of atomic (Balmer) lines and molecular (Fulcher) bands have been compared with the permeation measurements. A linear relationship has been established between the time integrated Γperm i.e. permeation fluence (Qperm) and the time integrated Hα intensity i.e. Hα fluence (Qα). Qperm also shows a strong relationship with the edge plasma density and various spectral fluences. The obtained results are discussed for exploring the applicability of the permeation probes in measuring the atomic flux near the first walls.

On CPD [1] (Compact PWI experimental Device) experiment, information of electronic logbook and sequence status are distributed by Web services to prepare future experimental environment such as steady state operation and remote participation. Hence, all the researchers can acquire information with a Web browser installed on a personal computer if they are connected to the Internet. However, to carry a notebook computer all the time is a burden to researchers. Furthermore, the researchers may not be always connected to the Internet. Mobile phones are superior in portability compared to notebook computers, and are easy to connect with Internet through the wireless network of the telecom carriers. Moreover, since recent mobile phones have full browsing function, their affinities to the Web services are becoming high. On this account, Web services for mobile phones are developed to access experimental information. For sequence monitoring, a mobile application MIDlet that utilizes special functions of mobile phone such as sound and vibration is also developed to draw attentions of researchers to sequence status.

Calorimetric measurements using the temperature increment of cooling-water were carried out to estimate the heat load distribution on the plasma facing components (PFCs) in the limiter discharges on TRIAM-1M. Line averaged electron density, ne, and LH power, PLH, dependences of the heat load on PFCs were measured. The heat load on the limiters was proportional to n e 1.5 in the range of ne = 0.2–1.0 × 1019 m−3 and P LH 1 in the range of PLH = 0.005–0.09 MW. For PLH > 0.1 MW, the plasma transition to an enhanced current drive (ECD) mode appeared and the ne dependences on the heat load on the limiter moderated. This indicates that the heat flux to scrape-off layer (SOL) region was reduced due to the improvement of the plasma confinement. The up–down asymmetry of the heat load on the vacuum vessel was enhanced in the ECD mode, which may be caused by the increasing of the direct loss of energetic electrons.

Astaxanthin has recently attracted considerable attention for its biological properties such as the antioxidant activity as well as a coloring agent used for farmed fish. However, its biological production, mainly by a green microalgae Haematococcus pluvialis , is costly because of its fastidious growth characters. Therefore, for future applications of biological astaxanthin production in aquaculture, non-fastidious microalgal strains were isolated from environmental samples, examined for their astaxanthin-accumulating activity, and characterized phylogenetically. While β-carotene was found in all tested isolates, one isolate, GK12, from activated sludge of a sewage treatment plant accumulated 2.5 ± 0.36 mg/g dry cell of free astaxanthin de novo under photoautotrophic culture condition, which was comparable to photoautotrophic cultures of other known astaxanthin-accumulating microorganisms. Mixotrophic culture conditions increased GK12 biomass, but astaxanthin content was decreased, suggesting that the simple photoautotrophic cultivation is more efficient way for GK12 to produce astaxanthin than mixotrophic cultivation. A phylogenetic study of SSU rDNA strongly suggested that GK12 is a novel species in the genus Monoraphidium , Chlorophyta. Besides making efforts to increase astaxanthin-productivity of known astaxanthin accumulators, it is also beneficial to study GK12 from the view point of applications to aquaculture.

A discharge longer than 5 h was successfully achieved on TRIAM-1M by fully non-inductive lower hybrid current drive (LHCD). The heat load distribution into the plasma facing components (PFCs) during the 5 h discharge was investigated using calorimetric measurements, which estimated that the injected radio frequency (RF) power coincided with the total heat load amount to the PFCs. The power balance, including the portion of direct loss power of the fast electrons and the heat flux due to the charge exchange (CX) process, was also investigated.